High-Strength 301 Stainless Cold-Rolled Strip 2.2mm x 40mm
301 half-hard stainless steel strip cold-rolled to 2.2 mm thickness and 40 mm width for spring applications, not further worked. HTS 7220.20.60: stainless flat-rolled, cold-reduced, <300 mm wide, >1.25 mm.
Import Duty Rates by Country of Origin
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If ball-bearing steel per note (h)
Specific alloy steel compositions for bearings classify as bars/rods regardless of form.
If industrial machinery end-use
Cold-rolled flat products over 600mm or different end-use may shift; narrow widths sometimes to bars.
If thickness 0.25-1.25 mm
Thinner gauges in same width range have separate statistical suffixes.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Certify minimum yield strength if claiming high-strength note (a) applicability elsewhere; ensure temper designation in docs; avoid oil coating that counts as further working
Related Products under HTS 7220.20.60
AISI 304 Cold-Rolled Stainless Steel Strip 2mm Thick 25mm Wide
This is a flat-rolled stainless steel strip made from AISI 304 grade, cold-rolled to a thickness of 2 mm and width of 25 mm, not further worked beyond cold-reduction. It falls under HTS 7220.20.60 because it is stainless steel, width under 300 mm, thickness over 1.25 mm, and not subjected to polishing, coating, or other surface treatments defined as 'further worked'.
430 Grade Cold-Reduced Stainless Steel Sheet 1.5mm x 50mm
Cold-rolled flat sheet of 430 ferritic stainless steel, 1.5 mm thick and 50 mm wide, in straight lengths without additional processing. Classified under HTS 7220.20.60 due to stainless steel composition, cold-rolled only (no further working), width <300 mm, and thickness >1.25 mm as specified.
316L Stainless Steel Cold-Rolled Band 3mm Thick 100mm Wide
Austenitic 316L stainless steel cold-rolled band at 3 mm thickness and 100 mm width, supplied in coils or cut lengths without surface treatments. It matches HTS 7220.20.60 for cold-reduced stainless flat-rolled products under 300 mm wide and exceeding 1.25 mm thick, not further worked.
17-4 PH Precipitation Hardening Stainless Steel Strip 1.8mm x 20mm
Cold-rolled strip of 17-4 PH martensitic stainless steel, 1.8 mm thick by 20 mm wide, not further worked beyond reduction. HTS 7220.20.60 applies to this stainless flat-rolled product with width <300 mm and thickness >1.25 mm.
Duplex 2205 Stainless Steel Cold-Rolled Plate 4mm Thick 150mm Wide
Duplex 2205 stainless steel cold-rolled to 4 mm thickness and 150 mm width, flat-rolled without additional treatments. Fits HTS 7220.20.60: stainless, cold-reduced only, <300 mm wide, >1.25 mm thick.
321 Stabilized Austenitic Stainless Cold-Reduced Strip 2.5mm x 75mm
Type 321 stabilized stainless steel strip cold-reduced to 2.5 mm thick and 75 mm wide, no further surface processing. HTS 7220.20.60 covers this stainless flat-rolled item under 300 mm wide and over 1.25 mm thick.