Containing more than 1.5 percent but less than 5 percent by weight of molybdenum
Flat-rolled products of stainless steel, of a width of less than 600 mm: > Not further worked than cold-rolled (cold-reduced): > Of a width of less than 300 mm: > Of a thickness exceeding 1.25 mm > Other: > Containing more than 0.5 percent by weight of nickel: > Containing more than 1.5 percent but less than 5 percent by weight of molybdenum
Duty Rate (from China)
Except for products described in headings 9903.03.02–9903.03.11, articles the product of any country, as provided for in subdivision (aa) of U.S. note 2 to this subchapter
Effective with respect to entries on or after September 27, 2024, articles the product of China, as provided for in subdivision (b) of U.S. note 31 to this subchapter
Products classified under HTS 7220.20.60.10
17-4PH Stainless Steel Cold-Rolled Sheet
Cold-rolled flat-rolled stainless steel sheet of 17-4PH alloy, width 250 mm, thickness 2 mm, containing ~4% molybdenum and ~4% nickel. Classified under HTS 7220.20.60.10 due to stainless steel composition, cold-rolled finish (not further worked), width <300 mm, thickness >1.25 mm, and specific Ni/Mo content ranges. Used in aerospace components for high strength and corrosion resistance.
Custom 15-5PH Stainless Steel Strip
Cold-reduced stainless steel strip in 15-5PH grade, 280 mm wide, 1.5 mm thick, with 3.2% molybdenum and 4.2% nickel. Fits HTS 7220.20.60.10 as flat-rolled stainless steel, cold-rolled only, narrow width, exceeding 1.25 mm thickness, and precise Ni/Mo percentages. Ideal for precision springs in medical devices.
PH 13-8Mo Stainless Steel Cold-Reduced Plate
Cold-rolled plate of PH 13-8Mo stainless steel, 290 mm width, 3 mm thickness, featuring 2.0% molybdenum and 8% nickel. Matches HTS 7220.20.60.10 criteria for stainless flat-rolled products not further worked than cold-rolled, narrow width, thick gauge, and specified alloying elements. Applied in nuclear reactor components.
Martensitic 15Cr-4Mo Stainless Steel Coil
Cold-rolled coil of martensitic stainless steel with 15% Cr, 4% Mo, 1% Ni, slit to 250 mm width, 2.5 mm thick. Qualifies for HTS 7220.20.60.10 as stainless steel flat-rolled product cold-rolled only, <300 mm wide, >1.25 mm thick, meeting Mo and Ni parameters. Used for turbine blades.
Alloy 1.4539 (17/4 PH) Cold-Rolled Strip
EN 1.4539 (17-4PH equivalent) stainless steel cold-rolled strip, 200 mm wide, 1.8 mm gauge, 3.5% Mo, 4.3% Ni. Precisely matches HTS 7220.20.60.10 for cold-reduced stainless flat products under 300 mm width, over 1.25 mm thick, with required element ranges. Common in offshore oilfield equipment.
Precipitation Hardening C455 Stainless Sheet
Custom C455 PH stainless steel cold-rolled sheet, 275 mm x 2.2 mm thick, 2.5% molybdenum, 11% nickel. Classed under HTS 7220.20.60.10 for its stainless nature, cold-rolled condition, narrow dimensions, and alloy specification compliance. Serves high-performance valve components.
17-7PH Stainless Steel Cold-Reduced Band
Cold-rolled band material in 17-7PH stainless, slit to 290 mm width, 1.6 mm thick, 1.8% Mo, 7.7% Ni. Falls squarely in HTS 7220.20.60.10 as not further worked stainless flat-rolled product meeting all dimensional and compositional criteria. Used for aircraft diaphragms.