321 Stabilized Austenitic Stainless Cold-Reduced Strip 2.5mm x 75mm
Type 321 stabilized stainless steel strip cold-reduced to 2.5 mm thick and 75 mm wide, no further surface processing. HTS 7220.20.60 covers this stainless flat-rolled item under 300 mm wide and over 1.25 mm thick.
Import Duty Rates by Country of Origin
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If carbon or non-stainless alloy steel
Flat-rolled products <600mm from non-stainless alloys classify in 7219 cold-rolled subheadings.
If of razor blade steel per note (d)
Specific stainless dimensions and Cr content certified for razor blades classify separately.
If sold as bar and rod product
Commercial packaging and end-use as bars/rods (not flat-rolled) shifts to 7221 ortho-position bar heading.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Document stabilization elements (titanium) in alloy cert; ensure no phosphatizing or oxalating occurred; declare as coil or cut-to-length accurately
Related Products under HTS 7220.20.60
AISI 304 Cold-Rolled Stainless Steel Strip 2mm Thick 25mm Wide
This is a flat-rolled stainless steel strip made from AISI 304 grade, cold-rolled to a thickness of 2 mm and width of 25 mm, not further worked beyond cold-reduction. It falls under HTS 7220.20.60 because it is stainless steel, width under 300 mm, thickness over 1.25 mm, and not subjected to polishing, coating, or other surface treatments defined as 'further worked'.
430 Grade Cold-Reduced Stainless Steel Sheet 1.5mm x 50mm
Cold-rolled flat sheet of 430 ferritic stainless steel, 1.5 mm thick and 50 mm wide, in straight lengths without additional processing. Classified under HTS 7220.20.60 due to stainless steel composition, cold-rolled only (no further working), width <300 mm, and thickness >1.25 mm as specified.
316L Stainless Steel Cold-Rolled Band 3mm Thick 100mm Wide
Austenitic 316L stainless steel cold-rolled band at 3 mm thickness and 100 mm width, supplied in coils or cut lengths without surface treatments. It matches HTS 7220.20.60 for cold-reduced stainless flat-rolled products under 300 mm wide and exceeding 1.25 mm thick, not further worked.
17-4 PH Precipitation Hardening Stainless Steel Strip 1.8mm x 20mm
Cold-rolled strip of 17-4 PH martensitic stainless steel, 1.8 mm thick by 20 mm wide, not further worked beyond reduction. HTS 7220.20.60 applies to this stainless flat-rolled product with width <300 mm and thickness >1.25 mm.
Duplex 2205 Stainless Steel Cold-Rolled Plate 4mm Thick 150mm Wide
Duplex 2205 stainless steel cold-rolled to 4 mm thickness and 150 mm width, flat-rolled without additional treatments. Fits HTS 7220.20.60: stainless, cold-reduced only, <300 mm wide, >1.25 mm thick.
409 Ferritic Stainless Steel Cold-Rolled Sheet 1.6mm x 250mm
Cold-rolled 409 automotive-grade ferritic stainless sheet, 1.6 mm thick by 250 mm wide, untreated beyond reduction. Classifies in HTS 7220.20.60 for stainless cold-rolled flats <300 mm wide >1.25 mm thick.