Other
Flat-rolled products of stainless steel, of a width of less than 600 mm: > Not further worked than cold-rolled (cold-reduced): > Of a width of less than 300 mm: > Of a thickness exceeding 1.25 mm > Other: > Other: > Other
Duty Rate (from China)
Except for products described in headings 9903.03.02–9903.03.11, articles the product of any country, as provided for in subdivision (aa) of U.S. note 2 to this subchapter
Effective with respect to entries on or after September 27, 2024, articles the product of China, as provided for in subdivision (b) of U.S. note 31 to this subchapter
Products classified under HTS 7220.20.60.80
Cold-Rolled 304 Stainless Steel Strip 1.5mm Thick 25mm Wide
This is a flat-rolled stainless steel strip made from grade 304 alloy, cold-rolled to a thickness of 1.5 mm and width of 25 mm, not subjected to any further surface treatments like polishing or coating. It falls under HTS 7220.20.60.80 as a cold-reduced product of stainless steel less than 300 mm wide, thicker than 1.25 mm, and classified as 'other' within this subheading. Commonly used in manufacturing applications requiring corrosion resistance.
Cold-Rolled 430 Stainless Steel Sheet 2mm Thick 150mm Wide
A cold-reduced flat-rolled product of 430 ferritic stainless steel, measuring 2 mm thick and 150 mm wide, without additional processing beyond cold-rolling. Classified under HTS 7220.20.60.80 due to its stainless steel composition, width under 300 mm, thickness over 1.25 mm, and 'other' status in the not-further-worked category. Ideal for automotive trim and appliance components.
Cold-Rolled 316L Stainless Steel Band 1.8mm Thick 50mm Wide
Grade 316L austenitic stainless steel flat-rolled band, cold-rolled to 1.8 mm thickness and 50 mm width, free of further surface treatments. It matches HTS 7220.20.60.80 for cold-reduced stainless steel strips under 300 mm wide and over 1.25 mm thick, categorized as 'other.' Used in marine and chemical processing equipment.
Cold-Rolled 201 Stainless Steel Strip 3mm Thick 100mm Wide
Flat-rolled 201 lean duplex stainless steel strip cold-reduced to 3 mm thickness and 100 mm width, not further worked. Fits HTS 7220.20.60.80 as stainless steel, cold-rolled, <300 mm wide, >1.25 mm thick, other. Suited for structural components needing cost-effective corrosion resistance.
Cold-Rolled Duplex 2205 Stainless Steel Sheet 2.5mm Thick 200mm Wide
Duplex 2205 stainless steel flat-rolled sheet, cold-rolled to 2.5 mm thick and 200 mm wide, without further working. Classified in HTS 7220.20.60.80 for its stainless properties, cold-reduction, narrow width, and thickness specs as 'other.' High-strength for offshore platforms.
Cold-Rolled 409 Stainless Steel Strip 1.6mm Thick 75mm Wide
Ferritic 409 stainless steel cold-rolled strip at 1.6 mm thickness and 75 mm width, not further worked beyond cold-reduction. Meets HTS 7220.20.60.80 criteria for stainless flat-rolled products <300 mm wide >1.25 mm thick, other category. Used in exhaust systems.
Cold-Rolled 304 Stainless Steel Blank 4mm Thick 250mm Wide
Pre-cut 304 stainless steel blanks cold-rolled to 4 mm thick, 250 mm wide, not further processed. Falls under HTS 7220.20.60.80 as cold-reduced stainless, narrow width, thick gauge, other. For stamping into parts.
Cold-Rolled 316 Stainless Steel Ribbon 1.4mm Thick 12mm Wide
Narrow 316 stainless ribbon cold-rolled to 1.4 mm x 12 mm, no further work. HTS 7220.20.60.80 for thin stainless strip specs. For binding applications.
Cold-Rolled 17-4 PH Stainless Steel Sheet 2.2mm Thick 180mm Wide
Precipitation-hardening 17-4 PH stainless sheet, cold-rolled 2.2 mm x 180 mm. HTS 7220.20.60.80 stainless flat-rolled. Aerospace grade.
Cold-Rolled 310 Stainless Steel Strip 1.75mm Thick 90mm Wide
High-temperature 310 stainless strip cold-rolled 1.75 mm x 90 mm. HTS 7220.20.60.80 category. Furnace parts.
Cold-Rolled 304L Stainless Steel Foil Alternative 1.3mm Thick 40mm Wide
304L stainless thick foil simulant, cold-rolled 1.3 mm x 40 mm. HTS 7220.20.60.80 thick strip.
Cold-Rolled 439 Stainless Steel Sheet 3.5mm Thick 280mm Wide
439 ferritic stainless sheet cold-rolled 3.5 mm x 280 mm. HTS 7220.20.60.80.
Cold-Rolled 321 Stainless Steel Strip 2.8mm Thick 120mm Wide
321 stabilized stainless strip 2.8 mm x 120 mm cold-rolled. HTS 7220.20.60.80.
Cold-Rolled 304 Stainless Steel Shim Stock 1.9mm Thick 60mm Wide
304 shim stock cold-rolled 1.9 mm x 60 mm. HTS 7220.20.60.80 as flat-rolled.
Cold-Rolled 316Ti Stainless Steel Band 2.1mm Thick 150mm Wide
316Ti stabilized band 2.1 mm x 150 mm cold-rolled. HTS 7220.20.60.80.