Cold-Rolled Duplex 2205 Stainless Steel Sheet 2.5mm Thick 200mm Wide
Duplex 2205 stainless steel flat-rolled sheet, cold-rolled to 2.5 mm thick and 200 mm wide, without further working. Classified in HTS 7220.20.60.80 for its stainless properties, cold-reduction, narrow width, and thickness specs as 'other.' High-strength for offshore platforms.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If alloy tool steel like chipper knife steel
Specific tool steel alloys with defined C/Cr/Mo/V content classify as bars/rods under heading 7225, not flat-rolled stainless.
If high-strength steel per note (a)
High-strength flat-rolled alloy steel meeting yield point criteria (e.g., <3mm at 275 MPa) has dedicated non-stainless provisions.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Certify high-strength properties if claiming special rates; ensure no patterns in relief which could shift classification
• Common pitfall: mismeasuring width leading to 7220.20.90 duties
Related Products under HTS 7220.20.60.80
Cold-Rolled 304 Stainless Steel Strip 1.5mm Thick 25mm Wide
This is a flat-rolled stainless steel strip made from grade 304 alloy, cold-rolled to a thickness of 1.5 mm and width of 25 mm, not subjected to any further surface treatments like polishing or coating. It falls under HTS 7220.20.60.80 as a cold-reduced product of stainless steel less than 300 mm wide, thicker than 1.25 mm, and classified as 'other' within this subheading. Commonly used in manufacturing applications requiring corrosion resistance.
Cold-Rolled 430 Stainless Steel Sheet 2mm Thick 150mm Wide
A cold-reduced flat-rolled product of 430 ferritic stainless steel, measuring 2 mm thick and 150 mm wide, without additional processing beyond cold-rolling. Classified under HTS 7220.20.60.80 due to its stainless steel composition, width under 300 mm, thickness over 1.25 mm, and 'other' status in the not-further-worked category. Ideal for automotive trim and appliance components.
Cold-Rolled 316L Stainless Steel Band 1.8mm Thick 50mm Wide
Grade 316L austenitic stainless steel flat-rolled band, cold-rolled to 1.8 mm thickness and 50 mm width, free of further surface treatments. It matches HTS 7220.20.60.80 for cold-reduced stainless steel strips under 300 mm wide and over 1.25 mm thick, categorized as 'other.' Used in marine and chemical processing equipment.
Cold-Rolled 201 Stainless Steel Strip 3mm Thick 100mm Wide
Flat-rolled 201 lean duplex stainless steel strip cold-reduced to 3 mm thickness and 100 mm width, not further worked. Fits HTS 7220.20.60.80 as stainless steel, cold-rolled, <300 mm wide, >1.25 mm thick, other. Suited for structural components needing cost-effective corrosion resistance.
Cold-Rolled 409 Stainless Steel Strip 1.6mm Thick 75mm Wide
Ferritic 409 stainless steel cold-rolled strip at 1.6 mm thickness and 75 mm width, not further worked beyond cold-reduction. Meets HTS 7220.20.60.80 criteria for stainless flat-rolled products <300 mm wide >1.25 mm thick, other category. Used in exhaust systems.
Cold-Rolled 304 Stainless Steel Blank 4mm Thick 250mm Wide
Pre-cut 304 stainless steel blanks cold-rolled to 4 mm thick, 250 mm wide, not further processed. Falls under HTS 7220.20.60.80 as cold-reduced stainless, narrow width, thick gauge, other. For stamping into parts.