Other
Copper plates, sheets and strip, of a thickness exceeding 0.15 mm. > Of copper-zinc base alloys (brass): > Other > Other
Duty Rate (from China)
Subheadings
Products classified under Tariff item 7409.2
Architectural Brass C38500 Coil
Architectural brass C38500 coil, composed of 58% copper and 42% zinc, with a thickness exceeding 0.15 mm. This copper-zinc base alloy (brass) is supplied in coil form for stamping door hardware and similar architectural components, meeting the tariff item's requirement for brass plates, sheets, or strip in coils.
7409.21.00Architectural Brass Coil 0.6mm C44300
C44300 admiralty brass coil, 0.6 mm thick and 1200 mm wide, is a copper-zinc-tin alloy used for decorative building panels. The tin content is 1%, which is less than 3%, and zinc predominates over tin, classifying it as brass. It is supplied in coils and exceeds 0.15 mm thickness.
7409.21.00Architectural Brass Coil 0.6mm x 200mm C26000
C26000 brass coil optimized for architectural applications, 0.6 mm thick and 200 mm wide, used in door hardware and ornamental strips. This copper-zinc base alloy (brass) in coil form falls under tariff item 7409.21.00, being a flat-rolled product with thickness exceeding 0.15 mm.
7409.21.00Automotive Radiator Brass Coil
C26000 brass coil for automotive radiator cores, 0.25 mm thick and 800 mm wide, is a copper-zinc base alloy (brass). It is arsenic-treated for durability and supplied in coils. The thickness exceeds 0.15 mm, and the width is over 500 mm, fitting the tariff item.
7409.21.00Brass Lock Strip Coil C28000
C28000 brass lock strip coil, 0.35 mm thick and 550 mm wide, is used for seamed tubing and lockseam pipe production. It is a copper-zinc base alloy (brass) with zinc predominating. The coil exceeds 0.15 mm thickness and is supplied in coils.
7409.21.00C11000 Admiralty Brass Coil
C44300 Admiralty brass coil, with 71% copper, 28% zinc, and 1% tin, and a thickness exceeding 0.15 mm. This qualifies as a copper-zinc base alloy (brass) because tin content is below 3% and zinc predominates over other elements, and it is supplied in coil form for condenser tubesheets.
7409.21.00C21000 Gilding Metal Coil
C21000 gilding metal coil, 0.7 mm thick and 700 mm wide, is a copper-zinc alloy with 95% copper and 5% zinc. It is used for bullet jackets and decorative plating base. Despite the low zinc content, it qualifies as brass because zinc is the predominant alloying element.
7409.21.00C22000 Red Brass Narrow Coil 0.4mm x 350mm
C22000 commercial red brass strip coil, 0.4 mm thickness and 350 mm width, popular for radiators and heat exchangers. This copper-zinc base alloy (brass) in coil form meets the requirements of tariff item 7409.21.00, with thickness exceeding 0.15 mm.
7409.21.00C23000 Low Brass Strip Coil 1.5mm Thick 480mm Wide
C23000 low brass (15% zinc) in coiled strip, 1.5 mm thick and 480 mm wide, used in musical instruments and architectural trim. This copper-zinc base alloy (brass) in coil form falls under tariff item 7409.21.00, being a flat-rolled product with thickness exceeding 0.15 mm.
7409.21.00C23000 Red Brass Narrow Coil
C23000 red brass (15% zinc) strip coil, 1.3 mm thick and 300 mm wide, used for decorative hardware. This copper-zinc base alloy (brass) qualifies as a plate, sheet or strip of brass in coils under tariff item 7409.21.00, as it is a flat-rolled product exceeding 0.15 mm in thickness.
7409.21.00C23000 Red Brass Wide Coil
C23000 red brass wide coil, 1.5 mm thick and 1000 mm wide, is a copper-zinc alloy with 85% copper and 15% zinc. It is used for plumbing fittings. The zinc content makes it a brass alloy, and the coil exceeds 0.15 mm thickness.
7409.21.00C26000 Brass Coil Sheet
C26000 brass coil sheet, 0.3 mm thick and 610 mm wide, is made from cartridge brass alloy (70% copper, 30% zinc). It is supplied in coils for fabrication. The zinc content makes it a brass alloy, and the coil exceeds 0.15 mm thickness.
7409.21.00C26000 Brass Coil Strip 0.5mm Thick 300mm Wide
A coil of C26000 cartridge brass plate in strip form, 0.5 mm thick and 300 mm wide, made from copper-zinc alloy where zinc predominates. This brass coil falls under tariff item 7409.21.00, being a flat-rolled product with thickness exceeding 0.15 mm.
7409.21.00C26000 Cartridge Brass Coil
C26000 cartridge brass coil, composed of 70% copper and 30% zinc, with a thickness exceeding 0.15 mm. This copper-zinc base alloy (brass) is supplied in coil form for ammunition casings and precision stamping, meeting the tariff item's definition of brass plates, sheets, or strip in coils.
7409.21.00C26000 Cartridge Brass Foil Coil
C26000 cartridge brass thin coil (30% zinc), 0.8 mm thick and 350 mm wide, used for ammunition casings and precision stamping. This copper-zinc base alloy (brass) is a flat-rolled product in coils, meeting the thickness requirement of over 0.15 mm for tariff item 7409.21.00.
7409.21.00C26000 Cartridge Brass Sheet Coil 6mm Thick
C26000 cartridge brass sheet coil, with a thickness of 6 mm, composed of 70% copper and 30% zinc. This copper-zinc base alloy (brass) is supplied in coil form for ammunition casings and architectural trim, meeting the tariff item's requirements for brass plates, sheets, or strip in coils.
7409.21.00C26800 Muntz Metal Brass Strip Coil
C26800 Muntz metal (yellow brass, 40% zinc) coil strip, 1.4 mm thick and 450 mm wide, used for architectural trim and fittings. As a copper-zinc base alloy in coil form, it falls under tariff item 7409.21.00, being a flat-rolled product with thickness exceeding 0.15 mm.
7409.21.00C26800 Yellow Brass Coil
C26800 yellow brass coil, 0.8 mm thick and 1000 mm wide, is a copper-zinc alloy with 65% copper and 35% zinc. It is used for radiator and heat exchanger applications. The zinc content makes it a brass alloy, and the coil exceeds 0.15 mm thickness.
7409.21.00C26800 Yellow Brass Coil Stock
C26800 yellow brass coil stock, with 65% copper and 35% zinc, supplied as strip over 0.15 mm thick for heat exchanger fins and radiator components. This copper-zinc base alloy (brass) in coil form meets the tariff item's requirements for brass plates, sheets, or strip in coils.
7409.21.00C28000 Muntz Metal Brass Strip Coil
C28000 Muntz metal brass strip coil, 1.2 mm thick and 800 mm wide, is a copper-zinc alloy with 60% copper and 40% zinc. It is used for marine hardware fabrication. The zinc content makes it a brass alloy, and the coil exceeds 0.15 mm thickness.
7409.21.00C28000 Muntz Metal Low-Lead Brass Coil
C28000 low-lead brass coil (40% zinc), 1.0 mm thick and 380 mm wide, used for plumbing components. This copper-zinc base alloy (brass) in coil form meets the definition of plates, sheets and strip under tariff item 7409.21.00, with thickness exceeding 0.15 mm.
7409.21.00C33000 Leaded Brass Coil
C33000 leaded brass coil, 1.0 mm thick and 900 mm wide, is a copper-zinc alloy with 65% copper, 34.5% zinc, and 0.5% lead. It is used for fastener production. The zinc content makes it a brass alloy, and the coil exceeds 0.15 mm thickness.
7409.21.00C34000 Low Brass Coil
C34000 low brass coil, 0.9 mm thick and 1500 mm wide, is a copper-zinc alloy with 65% copper and 35% zinc. It is used for architectural flashing. The zinc content makes it a brass alloy, and the coil exceeds 0.15 mm thickness.
7409.21.00C35300 High-Leaded Brass Coil 5mm Thick
C35300 high-leaded brass coil, with 3% lead and a thickness of 5 mm, composed of copper and zinc. This copper-zinc base alloy (brass) is supplied in coil form for machining bushings, meeting the tariff item's definition of brass plates, sheets, or strip in coils.
7409.21.00C36000 Free-Cutting Brass Coil
C36000 free-cutting brass coil, with 60-63% copper and the remainder zinc with lead, and a thickness exceeding 0.15 mm. This copper-zinc base alloy (brass) is supplied in coil form for screw machine products and fasteners, meeting the tariff item's definition of brass plates, sheets, or strip in coils.
7409.21.00C36000 Free-Cutting Brass Coil 7mm Thick
C36000 free-cutting brass coil, with sulfur addition and a thickness of 7 mm, composed of copper and zinc. This copper-zinc base alloy (brass) is supplied in coil form for screw machine products, meeting the tariff item's definition of brass plates, sheets, or strip in coils.
7409.21.00C36000 Free-Cutting Brass Strip Coil
C36000 free-machining brass (3% lead) thin coil, 0.6 mm thick and 420 mm wide, used for screw machine products. As a copper-zinc base alloy in coil form, it falls under tariff item 7409.21.00, being a flat-rolled product with thickness exceeding 0.15 mm.
7409.21.00C37700 Forging Brass Plate Coil 5.5mm Thick
C37700 forging brass plate coil, with a thickness of 5.5 mm, composed of copper and zinc. This copper-zinc base alloy (brass) is supplied in coil form for hot forging into valves and fittings, meeting the tariff item's requirements for brass plates, sheets, or strip in coils.
7409.21.00C44300 Admiralty Brass Coil Stock
C44300 admiralty brass (71% Cu, 28% Zn, 1% Sn) coil, 1.5 mm thick and 490 mm wide, used for heat exchangers. This copper-zinc base alloy (brass) in coil form meets the requirements of tariff item 7409.21.00, with tin content below 3% and zinc predominating over other elements.
7409.21.00C46400 Naval Brass Coil Strip
C46400 naval brass coil strip, with 59% copper, 39.25% zinc, and 1% tin, and a thickness exceeding 0.15 mm. This qualifies as a copper-zinc base alloy (brass) because tin content is below 3% and zinc predominates over other elements, and it is supplied in coil form for marine hardware and propeller shafts.
7409.21.00C46400 Naval Brass Strip Coil 8mm Thick
C46400 naval brass strip coil, with a thickness of 8 mm, composed of 59% copper, 39.25% zinc, and 1% tin. This qualifies as a copper-zinc base alloy (brass) because tin content is below 3% and zinc predominates over other elements, and it is supplied in coil form for marine hardware and propeller shafts.
7409.21.00C69300 Arsenical Brass Sheet Coil 10mm Thick
C69300 arsenical brass sheet coil, 10 mm thick, is a copper-zinc base alloy (brass) supplied in coils. It is heat-treated for use in connectors and battery terminals. The arsenic content is a minor element below 1%, which does not alter its classification as brass under tariff item 7409.21.00.
7409.21.00C69430 Brass Alloy Strip Coil 6mm Thick
C69430 medium-leaded brass strip coil, 6 mm thick, is a copper-zinc base alloy (brass) used for plumbing components. The lead content is present but zinc predominates over other elements, satisfying the subheading note for brass. It is supplied in coils and exceeds 0.15 mm thickness.
7409.21.00C69430 Silicon Brass Coil
C69430 silicon brass coil, with copper, 22% zinc, 4% silicon, and 1.5% manganese, and a thickness exceeding 0.15 mm. This qualifies as a copper-zinc base alloy (brass) because zinc predominates over silicon and manganese, and it is supplied in coil form for valve stems and fittings.
7409.21.00C72500 Commercial Bronze Coil
C72500 commercial bronze coil, with 88% copper and 12% zinc, and a thickness exceeding 0.15 mm. This qualifies as a copper-zinc base alloy (brass) because zinc predominates over other elements, and it is supplied in coil form for architectural flashing and kickplates.
7409.21.00CDA 26200 Arsenical Brass Coil
CDA 26200 arsenical brass coil, 0.15 mm thick and 1000 mm wide, is a copper-zinc alloy with 70.5% copper, 29% zinc, and 0.03% arsenic. It is used for superior corrosion resistance in condensers. The zinc content makes it a brass alloy, and the coil exceeds 0.15 mm thickness.
7409.21.00CDA 385 Extruded Brass Coil
CDA 385 extruded brass coil, with 58% copper, 39% zinc, and 3% lead, and a thickness exceeding 0.15 mm. This copper-zinc base alloy (brass) is supplied in coil form for plumbing adapters, meeting the tariff item's definition of brass plates, sheets, or strip in coils.
7409.21.00Decorative Brass Coil C51000
C69400 manganese brass coil, 0.4 mm thick and 700 mm wide, is a copper-zinc alloy with 58-68% copper, zinc balance, and 4-7% manganese. It is used for decorative stamping. The zinc content makes it a brass alloy, and the coil exceeds 0.15 mm thickness.
7409.21.00HVAC Brass Finstock Coil C4430
C4430 brass finstock coil for heat exchanger fins, 0.2 mm thick and 610 mm wide, is a copper-zinc alloy with high corrosion resistance. It is supplied in coils and exceeds 0.15 mm thickness. The zinc content makes it a brass alloy.
7409.21.00Muntz Metal C28000 Brass Coil
Muntz metal C28000 brass coil, with 60% copper and 40% zinc, and a thickness exceeding 0.15 mm. This copper-zinc base alloy (brass) is supplied in coil form for marine propellers and hardware, meeting the tariff item's requirements for brass plates, sheets, or strip in coils.
7409.29.00Admiralty Brass C44300 Plate 5mm+
Admiralty brass plate, 5 mm or more thick, made from copper-zinc-tin alloy (C44300), used for heat exchangers. It qualifies as a brass plate exceeding 0.15 mm in thickness, with tin content below 3%.
7409.29.00Architectural Brass Flat Sheet 2mm
Flat brass sheet, 2 mm thick, made from a copper-zinc base alloy (brass). It is used for architectural applications such as building facades, elevator panels, and interior trim, and qualifies as a plate or sheet of brass exceeding 0.15 mm in thickness.
7409.29.00Architectural Brass Sheet 0.6mm
Architectural brass sheet, 0.6 mm thick and 420 mm wide, is a polished copper-zinc alloy flat product cut to size for door kicks, trim fabrication, and decorative applications. Its width is under 500 mm, but it still qualifies as a sheet under the definition in section note 9. As a brass sheet exceeding 0.15 mm thickness, it is classified under tariff item 7409.29.00.
7409.29.00Brass Artisan Craft Sheet 0.9mm
Brass sheet, 0.9 mm thick, made from a copper-zinc base alloy, intended for use by metal artists, sculptors, and custom fabricators. It meets the definition of a plate or sheet of brass exceeding 0.15 mm in thickness.
7409.29.00Brass Decorative Sheet 0.5mm Thick
Decorative brass sheet, 0.5 mm thick, made from a copper-zinc base alloy, used for decorative panels and architectural trim. It qualifies as a brass plate or sheet exceeding 0.15 mm in thickness.
7409.29.00Brass Electrical Panel Sheet 1.5mm
Brass sheet, 1.5 mm thick, made from a copper-zinc base alloy, used for electrical enclosures and distribution boxes. It falls under this tariff item as a general brass plate or sheet exceeding 0.15 mm in thickness.
7409.29.00Brass Furniture Inlay Sheet 0.6mm
Thin brass sheet, 0.6 mm thick, made from a copper-zinc base alloy, used for furniture veneer inlays and decorative banding. It qualifies as a brass plate or sheet exceeding 0.15 mm in thickness.
7409.29.00Brass Gasket Sheet 1.2mm Thick
Brass sheet stock, 1.2 mm thick, made from a copper-zinc base alloy, used for cutting industrial gaskets and shims. It falls under this tariff item as a brass plate or sheet exceeding 0.15 mm in thickness.
7409.29.00Brass Heat Exchanger Plate 3mm
Brass plate stock, 3 mm thick, made from a copper-zinc base alloy, used for heat exchanger fins and cores. It qualifies as a brass plate exceeding 0.15 mm in thickness.
7409.29.00Brass HVAC Shim Sheet 0.7mm
Brass sheet, 0.7 mm thick, made from a copper-zinc base alloy, used for HVAC ductwork shimming and vibration isolation. It falls under this tariff item as a brass plate or sheet exceeding 0.15 mm in thickness.
7409.29.00Brass Instrument Dial Sheet 0.25mm
Brass sheet, 0.25 mm thick, made from a copper-zinc base alloy, used for manufacturing watch/clock dials and gauge faces. It qualifies as a brass plate or sheet exceeding 0.15 mm in thickness.
7409.29.00Brass Marine Grade Sheet 1.0mm
Naval brass sheet, 1.0 mm thick, made from copper-zinc-tin alloy (UNS C46400), used for marine hardware and boat fittings. It qualifies as a brass plate or sheet exceeding 0.15 mm in thickness, with tin content below 3%.
7409.29.00Brass Model Making Sheet 0.4mm
Brass sheet, 0.4 mm thick, made from a copper-zinc base alloy, used for scale model construction, architectural models, and hobby use. It qualifies as a brass plate or sheet exceeding 0.15 mm in thickness.
7409.29.00Brass Nameplate Blanks 0.8mm
Unfinished brass blanks, 0.8 mm thick, made from a copper-zinc base alloy, used for manufacturing nameplates and identification tags. They qualify as brass plates or sheets exceeding 0.15 mm in thickness.
7409.29.00Brass Shim Stock 0.3mm Precision
Precision brass shim stock, 0.3 mm thick, in coils, made from a copper-zinc base alloy, used for machinery alignment and spacing. It qualifies as a brass plate or sheet exceeding 0.15 mm in thickness.
7409.29.00Brass Transformer Sheet 0.2mm
Brass sheet, 0.2 mm thick, made from a copper-zinc base alloy, used for transformer shielding and electrical separators. It qualifies as a brass plate or sheet exceeding 0.15 mm in thickness.
7409.29.00C22000 Commercial Bronze Sheet
A 0.8 mm thick sheet of C22000 commercial bronze (90/10 Cu-Zn), 580 mm wide, used for stamping decorative trim and nameplates. It falls under tariff item 7409.29.00 as a copper-zinc base alloy (brass) plate, with zinc as the predominant alloying element.
7409.29.00C23000 Red Brass Architectural Panel
C23000 red brass architectural panels are flat-rolled copper-zinc alloy sheets, 1.2 mm thick and 750 mm wide, with an 85/15 copper-to-zinc ratio that gives them their characteristic reddish hue. They are used for building facades, weatherstripping, and decorative cladding. Because they are copper-zinc base alloys (brass) in sheet form exceeding 0.15 mm thickness, they fall under tariff item 7409.29.00.
7409.29.00C26000 Cartridge Brass Sheet
C26000 cartridge brass sheet is a copper-zinc alloy with 30% zinc content, supplied in flat sheets with thicknesses from 0.15 mm to 5 mm and widths exceeding 500 mm. It is commonly used for ammunition casings, electrical components, and deep-drawn parts. As a brass sheet exceeding 0.15 mm thickness, it is classified under tariff item 7409.29.00.
7409.29.00C26800 Muntz Metal Brass Plate
C26800 Muntz metal plate is a 60/40 copper-zinc brass sheet, 0.2 to 4.8 mm thick and over 600 mm wide, used in marine hardware, architectural trim, and heat exchanger components. Its high zinc content makes it a copper-zinc base alloy. As a flat-rolled brass product exceeding 0.15 mm thickness, it falls under tariff item 7409.29.00.