C26000 Brass Coil Strip 0.5mm Thick 300mm Wide
A coil of C26000 cartridge brass plate in strip form, 0.5 mm thick and 300 mm wide, made from copper-zinc alloy where zinc predominates. This brass coil falls under tariff item 7409.21.00, being a flat-rolled product with thickness exceeding 0.15 mm.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | — | Free |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the alloy is not a copper-zinc base alloy
This item covers plates, sheets and strip of other copper alloys.
If the product is in wire form (coiled) rather than flat strip
Wire of copper alloys is classified under heading 7408.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Ensure the product is in coil form and the thickness exceeds 0.15 mm, as required by the tariff item
• Verify the alloy composition to confirm it is a copper-zinc base alloy (brass)
• Keep commercial invoices and packing lists detailing the product dimensions and alloy grade for CBSA inspection
Related Products under Tariff item 7409.21.00
Architectural Brass C38500 Coil
Architectural brass C38500 coil, composed of 58% copper and 42% zinc, with a thickness exceeding 0.15 mm. This copper-zinc base alloy (brass) is supplied in coil form for stamping door hardware and similar architectural components, meeting the tariff item's requirement for brass plates, sheets, or strip in coils.
Architectural Brass Coil 0.6mm C44300
C44300 admiralty brass coil, 0.6 mm thick and 1200 mm wide, is a copper-zinc-tin alloy used for decorative building panels. The tin content is 1%, which is less than 3%, and zinc predominates over tin, classifying it as brass. It is supplied in coils and exceeds 0.15 mm thickness.
Architectural Brass Coil 0.6mm x 200mm C26000
C26000 brass coil optimized for architectural applications, 0.6 mm thick and 200 mm wide, used in door hardware and ornamental strips. This copper-zinc base alloy (brass) in coil form falls under tariff item 7409.21.00, being a flat-rolled product with thickness exceeding 0.15 mm.
Automotive Radiator Brass Coil
C26000 brass coil for automotive radiator cores, 0.25 mm thick and 800 mm wide, is a copper-zinc base alloy (brass). It is arsenic-treated for durability and supplied in coils. The thickness exceeds 0.15 mm, and the width is over 500 mm, fitting the tariff item.
Brass Lock Strip Coil C28000
C28000 brass lock strip coil, 0.35 mm thick and 550 mm wide, is used for seamed tubing and lockseam pipe production. It is a copper-zinc base alloy (brass) with zinc predominating. The coil exceeds 0.15 mm thickness and is supplied in coils.
C11000 Admiralty Brass Coil
C44300 Admiralty brass coil, with 71% copper, 28% zinc, and 1% tin, and a thickness exceeding 0.15 mm. This qualifies as a copper-zinc base alloy (brass) because tin content is below 3% and zinc predominates over other elements, and it is supplied in coil form for condenser tubesheets.