Incoloy 825 Cold-Rolled Stainless Steel Coil
High-nickel alloy steel coil made from Incoloy 825 (UNS N08825), containing over 38% nickel and 19.5% chromium, cold-rolled to a thickness of 0.7 mm and width exceeding 600 mm. This flat-rolled product is stainless steel (chromium ≥10.5%) and falls within the 0.5 mm to 1 mm thickness range, qualifying under this tariff item.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | +50.0% | 50% |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the thickness is less than 0.5 mm
Thinner stainless coils fall under a different thickness band.
If the thickness exceeds 1 mm
Thicker stainless coils are classified under the next thickness range.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Verify the product is not further worked beyond cold-rolling to maintain classification under this item
• Keep documentation of the alloy composition with chromium ≥10.5% to support stainless steel classification
• Declare the exact thickness and width on the commercial invoice to ensure accurate tariff assessment
Related Products under Tariff item 7219.34.00
304 Cold-Rolled Stainless Steel for Sink Manufacturing 0.8 mm
Commercial 304 stainless steel cold-rolled sheet, 0.8 mm thick and over 600 mm wide, supplied in mill finish for kitchen sink fabrication. This flat-rolled product is made of stainless steel (containing at least 10.5% chromium), cold-reduced only, and falls within the thickness range of 0.5 mm to 1 mm, meeting the tariff item's specifications.
316L Stainless Steel Cold-Rolled Sheet 0.9 mm for Appliances
Low-carbon 316L austenitic stainless steel sheet, cold-rolled to 0.9 mm thickness and 1200 mm width, not further worked, ideal for appliance panels. This flat-rolled product is stainless steel (chromium ≥10.5%) and falls within the 0.5 mm to 1 mm thickness range, qualifying under this tariff item.
317 Stainless Steel Cold-Reduced Sheet 0.75 mm
Austenitic 317 stainless steel cold-reduced sheet, 0.75 mm thick and 800 mm wide, in as-rolled condition without polishing or coating. This flat-rolled stainless steel product (chromium ≥10.5%) is not further worked than cold-reduced and falls within the 0.5 mm to 1 mm thickness range, meeting the tariff item's requirements.
321 Stabilized Stainless Cold Sheet 0.95 mm
Titanium-stabilized 321 austenitic stainless cold-rolled sheet, 0.95 mm x 1000 mm wide, no further working applied. This flat-rolled product is stainless steel (chromium ≥10.5%) and falls within the 0.5 mm to 1 mm thickness range, qualifying under this tariff item.
409 Stainless Steel Cold-Rolled Automotive Trim Sheet 0.6 mm
Ferritic 409 grade stainless steel cold-rolled sheet at 0.6 mm thickness, 1000 mm wide, without further working, used for vehicle trim. This flat-rolled product is stainless steel (chromium ≥10.5%) and falls within the 0.5 mm to 1 mm thickness range, qualifying under this tariff item.
410 Martensitic Stainless Cold-Rolled Sheet 0.65 mm
Hardenable 410 martensitic stainless steel cold-rolled to 0.65 mm thickness, over 600 mm wide, mill surface only. This flat-rolled product is stainless steel (chromium ≥10.5%) and falls within the 0.5 mm to 1 mm thickness range, qualifying under this tariff item.