Of a thickness of 0.5 mm or more but not exceeding 1 mm
Live horses, asses, mules and hinnies. > Of a thickness of 0.5 mm or more but not exceeding 1 mm
Duty Rate (from China)
Products classified under Tariff item 7219.34
304 Cold-Rolled Stainless Steel for Sink Manufacturing 0.8 mm
Commercial 304 stainless steel cold-rolled sheet, 0.8 mm thick and over 600 mm wide, supplied in mill finish for kitchen sink fabrication. This flat-rolled product is made of stainless steel (containing at least 10.5% chromium), cold-reduced only, and falls within the thickness range of 0.5 mm to 1 mm, meeting the tariff item's specifications.
7219.34.00316L Stainless Steel Cold-Rolled Sheet 0.9 mm for Appliances
Low-carbon 316L austenitic stainless steel sheet, cold-rolled to 0.9 mm thickness and 1200 mm width, not further worked, ideal for appliance panels. This flat-rolled product is stainless steel (chromium ≥10.5%) and falls within the 0.5 mm to 1 mm thickness range, qualifying under this tariff item.
7219.34.00317 Stainless Steel Cold-Reduced Sheet 0.75 mm
Austenitic 317 stainless steel cold-reduced sheet, 0.75 mm thick and 800 mm wide, in as-rolled condition without polishing or coating. This flat-rolled stainless steel product (chromium ≥10.5%) is not further worked than cold-reduced and falls within the 0.5 mm to 1 mm thickness range, meeting the tariff item's requirements.
7219.34.00321 Stabilized Stainless Cold Sheet 0.95 mm
Titanium-stabilized 321 austenitic stainless cold-rolled sheet, 0.95 mm x 1000 mm wide, no further working applied. This flat-rolled product is stainless steel (chromium ≥10.5%) and falls within the 0.5 mm to 1 mm thickness range, qualifying under this tariff item.
7219.34.00409 Stainless Steel Cold-Rolled Automotive Trim Sheet 0.6 mm
Ferritic 409 grade stainless steel cold-rolled sheet at 0.6 mm thickness, 1000 mm wide, without further working, used for vehicle trim. This flat-rolled product is stainless steel (chromium ≥10.5%) and falls within the 0.5 mm to 1 mm thickness range, qualifying under this tariff item.
7219.34.00410 Martensitic Stainless Cold-Rolled Sheet 0.65 mm
Hardenable 410 martensitic stainless steel cold-rolled to 0.65 mm thickness, over 600 mm wide, mill surface only. This flat-rolled product is stainless steel (chromium ≥10.5%) and falls within the 0.5 mm to 1 mm thickness range, qualifying under this tariff item.
7219.34.00430 Grade Cold-Reduced Stainless Steel Coil 0.7 mm
Cold-rolled coil of 430 ferritic stainless steel, 0.7 mm thick and over 600 mm wide, supplied in annealed and pickled condition without further surface treatments. This flat-rolled product is stainless steel (chromium ≥10.5%) and falls within the 0.5 mm to 1 mm thickness range, qualifying under this tariff item.
7219.34.00439 Ferritic Stainless Cold-Rolled Sheet 0.55 mm
High-chromium 439 ferritic stainless cold-rolled sheet at minimum 0.5 mm (0.55 mm actual) thickness, 1250 mm wide, untreated surface. This flat-rolled product is stainless steel (chromium ≥10.5%) and falls within the 0.5 mm to 1 mm thickness range, qualifying under this tariff item.
7219.34.00Alloy 20 Cold-Rolled Stainless Steel Coil
Carnegie Alloy 20 (UNS N08020) cold-rolled coil featuring 32-38% nickel, 19-21% chromium, and copper additions, thickness 0.6 mm, width 1,200 mm in coil form. This flat-rolled product is stainless steel (chromium ≥10.5%) and falls within the 0.5 mm to 1 mm thickness range, qualifying under this tariff item.
7219.34.00Custom 718 High-Nickel Alloy Steel Coil
Inconel 718 equivalent (UNS N07718) cold-rolled coil, 50-55% nickel with niobium additions, 0.75 mm thick, 700 mm width in coils. This flat-rolled product is stainless steel (chromium ≥10.5%) and falls within the 0.5 mm to 1 mm thickness range, qualifying under this tariff item.
7219.34.00Hastelloy C-276 Cold-Rolled Coil
Hastelloy C-276 (UNS N10276) high-nickel alloy steel coil with approximately 57% nickel and 16% molybdenum, cold-rolled to 0.8 mm thickness in widths over 600 mm, supplied in coils. This flat-rolled product is stainless steel (chromium ≥10.5%) and falls within the 0.5 mm to 1 mm thickness range, qualifying under this tariff item.
7219.34.00Incoloy 825 Cold-Rolled Stainless Steel Coil
High-nickel alloy steel coil made from Incoloy 825 (UNS N08825), containing over 38% nickel and 19.5% chromium, cold-rolled to a thickness of 0.7 mm and width exceeding 600 mm. This flat-rolled product is stainless steel (chromium ≥10.5%) and falls within the 0.5 mm to 1 mm thickness range, qualifying under this tariff item.
7219.34.00Inconel 625 Cold-Rolled Stainless Coil
Inconel 625 (UNS N06625) superalloy coil with 58% minimum nickel, 20-23% chromium, cold-rolled to 0.55 mm thickness, coil width 900 mm. This flat-rolled product is stainless steel (chromium ≥10.5%) and falls within the 0.5 mm to 1 mm thickness range, qualifying under this tariff item.
7219.34.00Type 304 Cold-Rolled Stainless Steel Sheet 0.8 mm Thick
Flat-rolled stainless steel sheet made from AISI Type 304 alloy, cold-rolled to a precise thickness of 0.8 mm and width exceeding 600 mm, not further worked beyond cold reduction. This product falls under this tariff item as it is stainless steel (chromium ≥10.5%) within the 0.5 mm to 1 mm thickness range.
7219.34.00Type 304 Cold-Rolled Stainless Steel Sheet 1 mm Max
Precision cold-rolled Type 304 stainless sheet exactly 1 mm thick, 1500 mm wide coils, not further worked beyond reduction. This flat-rolled product is stainless steel (chromium ≥10.5%) and falls within the 0.5 mm to 1 mm thickness range (inclusive of 1 mm), qualifying under this tariff item.