Unequal T-Bar 140x80x15mm
This is an unequal flange T-bar made of non-alloy steel, hot-drawn to shape, with dimensions of 140mm height, 80mm flange width, and 15mm thickness. It is commonly used in agricultural equipment frames, trailers, and other machinery where a T-shaped profile provides structural rigidity. It falls under this tariff item as a T-section of iron or non-alloy steel, not further worked than hot-drawn, with a height exceeding 80mm.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | +50.0% | 50% |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
PGA flags (1)Show detailsHide detailsGACSteelRequired
- GAC
Steel · Required
Global Affairs Canada: GAC Steel (Carbon Steel) requires review / declaration data. CBSA's Single Window matching criteria match this classification number (Within Range 7206000000–7217999999).
CBSA Single Window matching criteria, unknown
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the section is a T-section with a height of less than 80mm
T-sections of iron or non-alloy steel with a height under 80mm are classified under this code.
If the section is further worked (e.g., drilled, punched, or coated)
Angles, shapes, and sections that have been worked beyond hot-drawing are classified under this residual code.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Verify that the T-section is not further worked beyond hot-drawing, as any additional processing (e.g
• bending, welding, or surface finishing) may change the tariff classification
• Ensure the height of the section is at least 80mm; if it is less, it will be classified under a different code
• Keep records of the steel's non-alloy composition, such as a certificate of analysis, to support the classification if CBSA reviews the import
Related Products under Tariff item 7216.40.00
ASTM A36 L125x125x12 Hot-Rolled Angle
ASTM A36 L125x125x12 hot-rolled angle, made of non-alloy steel, with 125 mm legs and 12 mm thickness. It is not further worked beyond hot-rolling, meeting the definition of an L section over 80 mm in height under tariff item 7216.40.00.
Construction Angle 120x120x15mm
A construction-grade L angle of non-alloy steel, hot-rolled to a 120 mm height with 15 mm thickness, and not further worked. It falls under this tariff item as an L section exceeding the 80 mm height threshold, not further worked than hot-rolled. This angle is commonly used in building frames and structural supports.
Equal Leg Angle Iron 90x90x12mm
An equal-leg angle iron of non-alloy steel, hot-rolled to 90 mm by 90 mm by 12 mm, with a height of 90 mm and no further working. It qualifies for this tariff item as an L section exceeding the 80 mm height threshold, not further worked than hot-rolled. This angle is standard for machinery guards and light structural applications.
Extruded L-Angle Iron 150x150x15mm
An extruded L-angle section of non-alloy carbon steel, with a 150 mm leg height, 150 mm width, and 15 mm thickness, not further worked beyond extrusion. It falls under this tariff item as an L section exceeding the 80 mm height threshold, not further worked than extruded. This profile is ideal for shipbuilding frames and heavy structural applications.
Extruded T-Beam 150x100x18mm
An extruded T-beam profile of non-alloy steel, with a 150 mm height, 100 mm flange width, and 18 mm thickness, not further worked beyond extrusion. It qualifies for this tariff item as a T section exceeding the 80 mm height threshold, not further worked than extruded. This profile is used in structural applications requiring high strength-to-weight ratios.
Grade 50 L180x180x15 Steel Angle
Grade 50 L180x180x15 steel angle, a non-alloy structural steel equal angle with 180 mm legs and 15 mm thickness, hot-rolled. It qualifies under tariff item 7216.40.00 as an L section over 80 mm in height, not further worked than hot-rolled.