Equal Leg Angle Iron 90x90x12mm
An equal-leg angle iron of non-alloy steel, hot-rolled to 90 mm by 90 mm by 12 mm, with a height of 90 mm and no further working. It qualifies for this tariff item as an L section exceeding the 80 mm height threshold, not further worked than hot-rolled. This angle is standard for machinery guards and light structural applications.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | +50.0% | 50% |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the L section height is less than 80 mm
This heading covers L sections of iron or non-alloy steel not further worked than hot-rolled, hot-drawn or extruded, with a height of less than 80 mm.
If the angle has been cold-formed or cold-finished after hot-rolling
This heading covers angles, shapes and sections of iron or non-alloy steel, not further worked than cold-formed or cold-finished, which would apply if the product has undergone cold working.
If the angle is imported as part of a prefabricated structure
Structures and parts of structures of iron or steel are classified in this heading, which takes precedence over individual sections when presented as a complete structure.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Ensure the steel is non-alloy and not further worked beyond hot-rolling; any additional processing may change classification
• Verify the height is at least 80 mm, as smaller L sections fall under a different tariff item
• Keep mill certificates showing the chemical composition to confirm non-alloy status for the CBSA
Related Products under Tariff item 7216.40.00
ASTM A36 L125x125x12 Hot-Rolled Angle
ASTM A36 L125x125x12 hot-rolled angle, made of non-alloy steel, with 125 mm legs and 12 mm thickness. It is not further worked beyond hot-rolling, meeting the definition of an L section over 80 mm in height under tariff item 7216.40.00.
Construction Angle 120x120x15mm
A construction-grade L angle of non-alloy steel, hot-rolled to a 120 mm height with 15 mm thickness, and not further worked. It falls under this tariff item as an L section exceeding the 80 mm height threshold, not further worked than hot-rolled. This angle is commonly used in building frames and structural supports.
Extruded L-Angle Iron 150x150x15mm
An extruded L-angle section of non-alloy carbon steel, with a 150 mm leg height, 150 mm width, and 15 mm thickness, not further worked beyond extrusion. It falls under this tariff item as an L section exceeding the 80 mm height threshold, not further worked than extruded. This profile is ideal for shipbuilding frames and heavy structural applications.
Extruded T-Beam 150x100x18mm
An extruded T-beam profile of non-alloy steel, with a 150 mm height, 100 mm flange width, and 18 mm thickness, not further worked beyond extrusion. It qualifies for this tariff item as a T section exceeding the 80 mm height threshold, not further worked than extruded. This profile is used in structural applications requiring high strength-to-weight ratios.
Grade 50 L180x180x15 Steel Angle
Grade 50 L180x180x15 steel angle, a non-alloy structural steel equal angle with 180 mm legs and 15 mm thickness, hot-rolled. It qualifies under tariff item 7216.40.00 as an L section over 80 mm in height, not further worked than hot-rolled.
Heavy Duty T-Section 130x70x16mm
A heavy-duty T section of non-alloy steel, with a 130 mm height, 70 mm flange width, and 16 mm thickness, hot-rolled with no further working. It falls under this tariff item as a T section exceeding the 80 mm height threshold, not further worked than hot-rolled. This profile is commonly used in machinery frames and structural supports.