L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more
Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. > U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more: > L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more
Duty Rate (from China)
Products classified under Tariff item 7216.40
ASTM A36 L125x125x12 Hot-Rolled Angle
> A hot-rolled L-shaped angle section made from ASTM A36 non-alloy structural steel, with 125 mm legs and 12 mm thickness. It is not further worked beyond hot-rolling, and its height exceeds 80 mm, qualifying it under tariff item 7216.40.00 for L sections of iron or non-alloy steel.
7216.40.00Grade 50 L180x180x15 Steel Angle
> A hot-rolled equal-leg L angle of Grade 50 non-alloy structural steel, with 180 mm legs and 15 mm thickness. It is not further worked than hot-rolled, and its height exceeds 80 mm, placing it under tariff item 7216.40.00 for L sections of iron or non-alloy steel.
7216.40.00Hot-Extruded L200x200x20 Structural Angle
> A large L-section angle of non-alloy steel, produced by hot extrusion with 200 mm legs and 20 mm thickness. It is not further worked beyond extrusion, and its height exceeds 80 mm, qualifying under tariff item 7216.40.00 for L sections of iron or non-alloy steel.
7216.40.00Hot-Rolled L100x100x10 Steel Angle
> A hot-rolled L-shaped structural steel section with 100 mm legs and 10 mm thickness, made from non-alloy steel. It is not further worked beyond hot-rolling, and its height exceeds 80 mm, fitting tariff item 7216.40.00 for L sections of iron or non-alloy steel.
7216.40.00Hot-Rolled L100x50x10 Light Unequal Angle
> A light unequal L angle of non-alloy steel, hot-rolled with a 100 mm height, 50 mm width, and 10 mm thickness. It is not further worked beyond hot-rolling, and its height exceeds 80 mm, fitting tariff item 7216.40.00 for L sections of iron or non-alloy steel.
7216.40.00Hot-Rolled L125x125x16 Structural Steel Angle
> A standard structural equal angle L125x125x16 mm, hot-rolled from carbon non-alloy steel with a mill finish. It is not further worked beyond hot-rolling, and its height exceeds 80 mm, qualifying under tariff item 7216.40.00 for L sections of iron or non-alloy steel.
7216.40.00Hot-Rolled L150x75x12 Unequal Steel Angle
> An unequal leg L section of non-alloy steel, hot-rolled with a 150 mm height, 75 mm width, and 12 mm thickness. It is supplied in standard lengths without additional working, and its height exceeds 80 mm, fitting tariff item 7216.40.00 for L sections of iron or non-alloy steel.
7216.40.00Hot-Rolled L160x160x12 Construction Grade Angle
> A construction-grade equal angle L160x160x12 mm, hot-rolled from non-alloy steel and untreated. It is not further worked beyond hot-rolling, and its height exceeds 80 mm, qualifying under tariff item 7216.40.00 for L sections of iron or non-alloy steel.
7216.40.00Hot-Rolled L180x100x15 Unequal Structural Angle
> An unequal L angle of non-alloy steel, hot-rolled with a 180 mm height, 100 mm width, and 15 mm thickness. It is not further worked beyond hot-rolling, and its height exceeds 80 mm, fitting tariff item 7216.40.00 for L sections of iron or non-alloy steel.
7216.40.00Hot-Rolled L80x80x8 Equal Leg Angle
> An equal-leg L section of non-alloy steel, hot-rolled with 80 mm legs and 8 mm thickness. It is not further worked beyond hot-rolling, and its height is exactly 80 mm, meeting the minimum threshold for tariff item 7216.40.00 for L sections of iron or non-alloy steel.
7216.40.00Hot-Rolled T100x50x8 Light Tee Section
> A lightweight T profile of non-alloy steel, hot-rolled with a 100 mm height, 50 mm flange, and 8 mm thickness. It is not further worked beyond hot-rolling, and its height exceeds 80 mm, qualifying under tariff item 7216.40.00 for T sections of iron or non-alloy steel.
7216.40.00Hot-Rolled T150x75x12 Steel Tee Section
> A T-shaped non-alloy steel beam, hot-rolled with a 150 mm height, 75 mm flange, and 12 mm thickness. It is not further worked beyond hot-rolling, and its height exceeds 80 mm, placing it under tariff item 7216.40.00 for T sections of iron or non-alloy steel.
7216.40.00Hot-Rolled T200x100x16 Tee Beam Section
> A T section hot-rolled from non-alloy steel, with a 200 mm stem height, 100 mm flange, and 16 mm web thickness. It is not further worked beyond hot-rolling, and its height exceeds 80 mm, qualifying under tariff item 7216.40.00 for T sections of iron or non-alloy steel.
7216.40.00Hot-Roluded T250x125x20 Heavy Tee Section
> A heavy-duty T section of non-alloy steel, hot-rolled with a 250 mm height, 125 mm flange, and 20 mm thickness. It is not further worked beyond hot-rolling, and its height exceeds 80 mm, fitting tariff item 7216.40.00 for T sections of iron or non-alloy steel.
7216.40.00S355JR Hot-Rolled L150x75x10 Unequal Angle
> An unequal leg L angle of S355JR non-alloy steel, hot-rolled with a 150 mm height, 75 mm width, and 10 mm thickness. It is not further worked beyond hot-rolling, and its height exceeds 80 mm, qualifying under tariff item 7216.40.00 for L sections of iron or non-alloy steel.