Chapter 7216 — Customs Tariff Headings
Subheadings
Products classified under Tariff item 72.16
Extruded H-Profile 65x45x5.5 mm
An extruded H-shaped non-alloy steel section, with a height of 65 mm, width of 45 mm, and thickness of 5.5 mm, used for structural purposes. It is not further worked than extruded, qualifying for tariff item 7216.10.00 as an H section under 80 mm in height. Suitable for machinery framing and light structural applications.
7216.10.00Extruded H-Section 70x50x6 mm
An extruded H-profile made from non-alloy steel, with a height of 70 mm, width of 50 mm, and thickness of 6 mm, used in machinery framing. It is not further worked than extruded, fitting tariff item 7216.10.00 for H sections under 80 mm in height. Provides structural support in light industrial equipment.
7216.10.00Extruded H-Section Steel 70mm Height
Extruded H-section steel profile, 70 mm in height, made from non-alloy steel and used in modular framing and racking systems. It is not further worked beyond extrusion, meeting the definition of an H section under 80 mm in height.
7216.10.00Extruded I-Profile Bracket Stock 68mm
Extruded I-profile steel section, 68 mm in height, used as bracket stock. It is made from non-alloy steel and has not been further worked beyond extrusion, fitting the definition of an I section under 80 mm.
7216.10.00Extruded I-Section 50x35x4 mm
An extruded non-alloy steel I-profile, with a height of 50 mm, width of 35 mm, and web thickness of 4 mm, used for furniture reinforcement. It is not further worked than extruded, qualifying for tariff item 7216.10.00 as an I section under 80 mm in height. Provides lightweight structural support in furniture applications.
7216.10.00Extruded Parallel Flange I 58x38x5 mm
A parallel flange I-section extruded from non-alloy steel, with a height of 58 mm and width of 38 mm. It is not further worked than extruded, fitting tariff item 7216.10.00 for I sections under 80 mm in height. Used in light structural and architectural applications.
7216.10.00Extruded U-Channel Iron 40mm x 20mm
Small extruded U-channel iron section, 40 mm high by 20 mm wide, used for window frames and lintels. It is made from non-alloy iron and is not further worked beyond extrusion, qualifying as a U section under 80 mm.
7216.10.00Hot-Drawn H-Purlin Section 75mm
Hot-drawn H-profile purlin for roof supports, 75 mm in height, made from non-alloy steel. It is not further worked beyond hot-drawing, meeting the definition of an H section under 80 mm.
7216.10.00Hot-Drawn I-Beam Section 65mm Height
Hot-drawn I-beam section of non-alloy steel, 65 mm in height, used for lightweight trusses and joists in machinery bases. It is not further worked beyond hot-drawing, qualifying as an I section under 80 mm.
7216.10.00Hot-Drawn I-Channel 72x48x6 mm
A hot-drawn I-section made from non-alloy steel, with a height of 72 mm, width of 48 mm, and thickness of 6 mm, used for support applications. It is not further worked than hot-drawn, qualifying for tariff item 7216.10.00 as an I section under 80 mm in height. Suitable for light structural supports.
7216.10.00Hot-Drawn U-Profile 60x45x5 mm
A hot-drawn U-section made from non-alloy steel, with a height of 60 mm, width of 45 mm, and flange thickness of 5 mm, used in lightweight construction. It is not further worked than hot-drawn, fitting tariff item 7216.10.00 for U sections under 80 mm in height. Provides structural support in light building applications.
7216.10.00Hot-Extruded I-Profile 62x40x4.5 mm
An extruded I-profile made from non-alloy steel, with a height of 62 mm, width of 40 mm, and thickness of 4.5 mm, used for light-duty applications. It is not further worked than extruded, qualifying for tariff item 7216.10.00 as an I section under 80 mm in height. Suitable for light framing and support.
7216.10.00Hot-Rolled Channel 75x40x6mm
A hot-rolled U-shaped channel section made from non-alloy steel, with a height of 75 mm, flange width of 40 mm, and thickness of 6 mm. It is not further worked beyond hot-rolling, making it classifiable under tariff item 7216.10.00 for U sections under 80 mm in height. Commonly used in trailer frames and light structural applications.
7216.10.00Hot-Rolled H-Bar 78x55x7 mm
A hot-rolled H-section made of non-alloy steel, measuring 78 mm in height with a 55 mm flange and 7 mm thickness. It is used for temporary supports in construction and has not been further worked beyond hot-rolling. This product falls under tariff item 7216.10.00 as an H-section of a height less than 80 mm, not further worked than hot-rolled.
7216.10.00Hot-Rolled HEA Light H-Section 55mm
Hot-rolled HEA light H-section, 55 mm in height, used for wide flange beams in building frameworks. It is made from non-alloy steel and is not further worked beyond hot-rolling, fitting the definition of an H section under 80 mm.
7216.10.00Hot-Rolled H-Profile Rail Support 78mm
Hot-rolled H-profile for rail supports, 78 mm in height, made from non-alloy steel. It is not further worked beyond hot-rolling, meeting the definition of an H section under 80 mm.
7216.10.00Hot-Rolled H-Section 68x42x5 mm
A standard hot-rolled H-section made of non-alloy steel, with a height of 68 mm, flange width of 42 mm, and web thickness of 5 mm. It is used in light structural applications and is not further worked beyond hot-rolling. This product is classified under tariff item 7216.10.00 as an H-section under 80 mm in height.
7216.10.00Hot-Rolled H-Section Lintel 72mm
Hot-rolled H-section lintel beam, 72 mm in height, used for door and window supports. It is made from non-alloy steel and is not further worked beyond hot-rolling, qualifying as an H section under 80 mm.
7216.10.00Hot-Rolled I-Beam 65x40x4.5 mm
A hot-rolled I-section of non-alloy steel, measuring 65 mm in height, 40 mm flange width, and 4.5 mm web thickness. It is suitable for small building supports and is not further worked than hot-rolled. This product falls under tariff item 7216.10.00 as an I-section under 80 mm in height.
7216.10.00Hot-Rolled IPN I-Beam 50mm Height
Hot-rolled IPN I-beam section, 50 mm in height, with sloped flanges for light structural work. It is made from non-alloy steel and is not further worked beyond hot-rolling, fitting the definition of an I section under 80 mm.
7216.10.00Hot-Rolled ISL Light I-Section 45mm
Hot-rolled ISL light I-section, 45 mm in height, used for parallel flange beams in infrastructure. It is made from non-alloy steel and is not further worked beyond hot-rolling, qualifying as an I section under 80 mm.
7216.10.00Hot-Rolled Junior I-Beam 55x30x4 mm
A junior-sized hot-rolled I-beam made of non-alloy steel, with a height of 55 mm, flange width of 30 mm, and thickness of 4 mm. It is intended for DIY framing applications and is not further worked beyond hot-rolling. This product is classified under tariff item 7216.10.00 as an I-section under 80 mm in height.
7216.10.00Hot-Rolled Light Channel U-Section 30mm
Very light hot-rolled U-channel, 30 mm in height, used for furniture frames and partitions. It is made from non-alloy steel and is not further worked beyond hot-rolling, fitting the definition of a U section under 80 mm.
7216.10.00Hot-Rolled Light UPE Beam 60mm
Hot-rolled light UPE beam, 60 mm in height, used for parallel flange channel applications in construction. It is made from non-alloy steel and is not further worked beyond hot-rolling, qualifying as a U section under 80 mm.
7216.10.00Hot-Rolled Lip Channel 45x15x4mm
A lipped U-shaped channel section, hot-rolled from non-alloy steel, with a height of 45 mm and flange width of 15 mm. The lipped flanges do not alter its classification as a U section under 80 mm in height, and it is not further worked than hot-rolled. Used in retail fixture manufacturing and shelf support systems.
7216.10.00Hot-Rolled Narrow U 52x28x3.5 mm
A narrow gauge U-section made of non-alloy steel, hot-rolled, with a height of 52 mm, width of 28 mm, and thickness of 3.5 mm. It is used in light structural applications and is not further worked beyond hot-rolling. This product falls under tariff item 7216.10.00 as a U-section under 80 mm in height.
7216.10.00Hot-Rolled U Channel 50x25x5mm
A hot-rolled U-shaped structural section made from non-alloy steel, with a height of 50 mm, flange width of 25 mm, and thickness of 5 mm. It is not further worked than hot-rolled, qualifying for tariff item 7216.10.00 as a U section under 80 mm in height. Suitable for general structural and framing applications.
7216.10.00Hot-Rolled U-Channel 75x50x5 mm
A hot-rolled U-section made of non-alloy steel, measuring 75 mm in height, 50 mm in width, and 5 mm in thickness. It is used in light structural framing and is not further worked beyond hot-rolling. This product is classified under tariff item 7216.10.00 as a U-section under 80 mm in height.
7216.10.00Hot-Rolled U-Lintel 45x30x4 mm
A hot-rolled U-section made of non-alloy steel, with a height of 45 mm, width of 30 mm, and thickness of 4 mm. It is used as a lintel in small construction projects and is not further worked beyond hot-rolling. This product falls under tariff item 7216.10.00 as a U-section under 80 mm in height.
7216.10.00Hot-Rolled U-Section 40x25x3 mm
A small hot-rolled U-channel made of non-alloy steel, measuring 40 mm in height, 25 mm in width, and 3 mm in thickness. It is ideal for shelving tracks and is not further worked beyond hot-rolling. This product is classified under tariff item 7216.10.00 as a U-section under 80 mm in height.
7216.10.00Hot-Rolled U-Section Steel Beam 75mm Height
Hot-rolled U-shaped structural steel section, 75 mm in height, used in light construction framing and supports. It is made from non-alloy steel and is not further worked beyond hot-rolling, meeting the definition of a U section under 80 mm.
7216.10.00Light Gauge U Section 40x20x4mm
A lightweight hot-rolled U profile for framing, with a height of 40 mm, flange width of 20 mm, and thickness of 4 mm, made from non-alloy steel. It is not further worked than hot-rolled, fitting tariff item 7216.10.00 for U sections under 80 mm in height. Commonly used in HVAC duct supports and light framing.
7216.10.00Light I-Beam Hot-Extruded 62mm
Light I-beam extruded for shelving, made from non-alloy steel. It is not further worked beyond extrusion, fitting the definition of an I section under 80 mm in height.
7216.10.00Structural U Channel 60x30x5.5mm
A medium structural U channel hot-rolled from non-alloy steel, with a height of 60 mm, flange width of 30 mm, and thickness of 5.5 mm. It is not further worked than hot-rolled, qualifying for tariff item 7216.10.00 as a U section under 80 mm in height. Suitable for racking systems and light structural frames.
7216.10.00UPE 55 Light U Section
A standard UPE 55 profile, hot-rolled from non-alloy steel, with a height of 55 mm, flange width of 50 mm, and web thickness of 5.6 mm. It is not further worked than hot-rolled, fitting tariff item 7216.10.00 for U sections under 80 mm in height. Used in building construction and light structural applications.
7216.10.00UPN 65 Channel Section
A UPN 65 standard profile, hot-rolled with parallel flanges, made from non-alloy steel grade S275, with a height of 65 mm. It is not further worked than hot-rolled, qualifying for tariff item 7216.10.00 as a U section under 80 mm in height. Used in building lintels and window frames.
7216.10.00U Section 70x35x6.5mm Heavy
A heavy-gauge hot-rolled U section with a height of 70 mm, flange width of 35 mm, and thickness of 6.5 mm, made from non-alloy steel grade S355JR. It is not further worked than hot-rolled, fitting tariff item 7216.10.00 for U sections under 80 mm in height. Used for crane rail supports and heavy structural applications.
7216.10.00U-Section Hot-Rolled Stud 55x50mm
U-section stud for wall framing, 55 mm in height, made from non-alloy steel. It is hot-rolled and not further worked, qualifying as a U section under 80 mm.
7216.21.00Hot-Rolled L40x40x4 Steel Angle
A hot-rolled L-shaped structural angle made from non-alloy steel, with 40 mm legs and 4 mm thickness. It is not further worked beyond hot-rolling, making it classifiable under tariff item 7216.21.00 as an L section of iron or non-alloy steel with a height under 80 mm.
7216.21.00L15x15x2 Small Hot-Extruded L Bar
A tiny extruded L-shaped bar of non-alloy steel, measuring 15 mm by 15 mm with a 2 mm thickness, not further worked after extrusion. It is an L section under 80 mm in height, suitable for precision instruments, and classifiable under tariff item 7216.21.00.
7216.21.00L20x20x3 Mini Hot-Rolled L Angle
A miniature hot-rolled L angle of non-alloy steel, 20 mm by 20 mm with a 3 mm thickness, not further worked beyond hot-rolling. It is an L section under 80 mm in height, used in model building, crafts, and light fixtures, classifiable under tariff item 7216.21.00.
7216.21.00L25x25x3 Support Bracket Angle
A support bracket angle made of non-alloy steel, hot-rolled into an L shape with 25 mm legs and 3 mm thickness, not further worked. It is an L section under 80 mm in height, classifiable under tariff item 7216.21.00.
7216.21.00L25x25x4 Hot-Drawn Steel L Section
A small hot-drawn L section of non-alloy steel, 25 mm legs by 4 mm thickness, without additional processing. It is an L section under 80 mm in height, used in automotive reinforcements and furniture frames, classifiable under tariff item 7216.21.00.
7216.21.00L30x30x3 Unequal Leg Steel Angle
A hot-rolled equal-leg L angle of non-alloy steel, 30 mm by 30 mm with a 3 mm thickness, suitable for small structural applications. It is not further worked beyond hot-rolling, classifiable under tariff item 7216.21.00 as an L section under 80 mm in height.
7216.21.00L30x30x4 Fabricated Angle Stock
A hot-rolled L-shaped angle stock of non-alloy steel, 30 mm by 30 mm with a 4 mm thickness, not further worked. It is an L section under 80 mm in height, intended for general fabrication, classifiable under tariff item 7216.21.00.
7216.21.00L35x35x4 Hot-Rolled Framework Angle
A hot-rolled non-alloy steel L angle, 35 mm by 35 mm with a 4 mm thickness, with an untreated surface and not further worked. It is an L section under 80 mm in height, commonly used in shelving units and racking, classifiable under tariff item 7216.21.00.
7216.21.00L40x40x5 Unequal Angle L Section
A hot-rolled unequal leg L section of non-alloy steel, 40 mm by 40 mm with a 5 mm thickness, not further worked. It is an L section under 80 mm in height, used in shelving and trusses, classifiable under tariff item 7216.21.00.
7216.21.00L45x45x5 Extruded Steel Angle Bar
An extruded L section of non-alloy steel, 45 mm legs by 5 mm thickness, not further worked beyond extrusion. It is an L section under 80 mm in height, used in window frames and decorative trim, classifiable under tariff item 7216.21.00.
7216.21.00L50x50x5 Hot-Rolled Mild Steel Angle
A hot-rolled L section of low-carbon mild steel, 50 mm by 50 mm legs with a 5 mm wall thickness, not further worked beyond rolling. It is an L section under 80 mm in height, classifiable under tariff item 7216.21.00.
7216.21.00L50x50x6 Construction Grade Angle
A construction-grade hot-rolled L angle of non-alloy steel, 50 mm by 50 mm with a 6 mm thickness, not further worked. It is an L section under 80 mm in height, used in building supports, classifiable under tariff item 7216.21.00.
7216.21.00L55x55x5.5 Mild Steel L Profile
A mild steel hot-rolled L profile, 55 mm by 55 mm with a 5.5 mm thickness, not further worked. It is an L section under 80 mm in height, used for general fabrication and repairs, classifiable under tariff item 7216.21.00.
7216.21.00L60x60x6 Structural Hot-Rolled Angle Iron
A heavy-duty hot-rolled angle iron of non-alloy steel, 60 mm by 60 mm with a 6 mm thickness, for structural use. It is not further worked beyond hot-rolling, classifiable under tariff item 7216.21.00 as an L section under 80 mm in height.
7216.21.00L65x65x6 Hot-Rolled Angle Section
A near-max height hot-rolled L angle of non-alloy steel, 65 mm by 65 mm with a 6 mm thickness, not further worked. It is an L section under 80 mm in height, used in heavy-duty bracing applications, classifiable under tariff item 7216.21.00.
7216.22.00ASTM A36 T-Section 40x40x4mm
ASTM A36 grade hot-rolled T-section steel beam, 40mm height x 40mm width x 4mm thick, suitable for general structural use. This product is a T section of iron or non-alloy steel, not further worked than hot-rolled, with a height of less than 80mm, and therefore falls under tariff item 7216.22.00.
7216.22.00Carbon Steel T-Beam 30x30x3mm
Lightweight hot-drawn carbon steel T-beam section, 30mm height x 30mm flange x 3mm thick for small structural applications. This product is a T section of iron or non-alloy steel, not further worked than hot-drawn, with a height of less than 80mm, and therefore falls under tariff item 7216.22.00.
7216.22.00EN 10025 S235JR T-Profile 45x45x5mm
European standard EN 10025 S235JR hot-rolled T profile steel section, 45mm x 45mm x 5mm. This product is a T section of iron or non-alloy steel, not further worked than hot-rolled, with a height of less than 80mm, and therefore falls under tariff item 7216.22.00.
7216.22.00Hot-Rolled T-Bar Steel 50x50x5mm
A hot-rolled T-section of nonalloy steel measuring 50mm height, 50mm flange width, and 5mm thickness, not further worked beyond hot-rolling. This product is a T section of iron or non-alloy steel, not further worked than hot-rolled, with a height of less than 80mm, and therefore falls under tariff item 7216.22.00.
7216.22.00Hot-Rolled Tee Bar 60x60x6mm
Structural hot-rolled tee bar of carbon steel, 60mm stem height x 60mm flange x 6mm web thickness. This product is a T section of iron or non-alloy steel, not further worked than hot-rolled, with a height of less than 80mm, and therefore falls under tariff item 7216.22.00.
7216.22.00Hot-Rolled T Section 70x70x7mm
Heavy-duty hot-rolled T section steel bar 70mm height x 70mm x 7mm, maximum size for this subheading. This product is a T section of iron or non-alloy steel, not further worked than hot-rolled, with a height of less than 80mm, and therefore falls under tariff item 7216.22.00.
7216.22.00S275JR Hot-Rolled Tee Steel 55x55x5.5mm
S275JR structural grade hot-rolled tee steel profile, 55mm x 55mm x 5.5mm thickness. This product is a T section of iron or non-alloy steel, not further worked than hot-rolled, with a height of less than 80mm, and therefore falls under tariff item 7216.22.00.