Hot-Rolled H-Section 68x42x5 mm
A standard hot-rolled H-section made of non-alloy steel, with a height of 68 mm, flange width of 42 mm, and web thickness of 5 mm. It is used in light structural applications and is not further worked beyond hot-rolling. This product is classified under tariff item 7216.10.00 as an H-section under 80 mm in height.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | +50.0% | 50% |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the H-section has a height of 80 mm or more
H-sections of 80 mm or more in height are classified under subheading 7216.32.
If the section is an angle, shape, or section other than U, I, or H
Other angles, shapes, and sections of non-alloy steel are classified separately.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Confirm the steel is non-alloy by reviewing the mill certificate for alloying elements within Chapter 72 limits
• Keep records of the hot-rolling process to show no further working was done
• Measure the height accurately, as sections at or above 80 mm fall under a different tariff item
Related Products under Tariff item 7216.10.00
Extruded H-Profile 65x45x5.5 mm
An extruded H-shaped non-alloy steel section, with a height of 65 mm, width of 45 mm, and thickness of 5.5 mm, used for structural purposes. It is not further worked than extruded, qualifying for tariff item 7216.10.00 as an H section under 80 mm in height. Suitable for machinery framing and light structural applications.
Extruded H-Section 70x50x6 mm
An extruded H-profile made from non-alloy steel, with a height of 70 mm, width of 50 mm, and thickness of 6 mm, used in machinery framing. It is not further worked than extruded, fitting tariff item 7216.10.00 for H sections under 80 mm in height. Provides structural support in light industrial equipment.
Extruded H-Section Steel 70mm Height
Extruded H-section steel profile, 70 mm in height, made from non-alloy steel and used in modular framing and racking systems. It is not further worked beyond extrusion, meeting the definition of an H section under 80 mm in height.
Extruded I-Profile Bracket Stock 68mm
Extruded I-profile steel section, 68 mm in height, used as bracket stock. It is made from non-alloy steel and has not been further worked beyond extrusion, fitting the definition of an I section under 80 mm.
Extruded I-Section 50x35x4 mm
An extruded non-alloy steel I-profile, with a height of 50 mm, width of 35 mm, and web thickness of 4 mm, used for furniture reinforcement. It is not further worked than extruded, qualifying for tariff item 7216.10.00 as an I section under 80 mm in height. Provides lightweight structural support in furniture applications.
Extruded Parallel Flange I 58x38x5 mm
A parallel flange I-section extruded from non-alloy steel, with a height of 58 mm and width of 38 mm. It is not further worked than extruded, fitting tariff item 7216.10.00 for I sections under 80 mm in height. Used in light structural and architectural applications.