Hot-Rolled Junior I-Beam 55x30x4 mm
A junior-sized hot-rolled I-beam made of non-alloy steel, with a height of 55 mm, flange width of 30 mm, and thickness of 4 mm. It is intended for DIY framing applications and is not further worked beyond hot-rolling. This product is classified under tariff item 7216.10.00 as an I-section under 80 mm in height.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | +50.0% | 50% |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the I-section has a height of 80 mm or more
I-sections of 80 mm or more in height are classified under subheading 7216.33.
If the section has been further worked (e.g., cut to length with additional processing)
Sections not further worked than hot-rolled, hot-drawn, or extruded are excluded from this tariff item if additional working has occurred.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Ensure the product is non-alloy steel and not further worked after hot-rolling
• Provide documentation showing the height is under 80 mm to avoid misclassification
• Consider the end use, as sections for DIY framing may still be classified as structural sections if they meet the definition
Related Products under Tariff item 7216.10.00
Extruded H-Profile 65x45x5.5 mm
An extruded H-shaped non-alloy steel section, with a height of 65 mm, width of 45 mm, and thickness of 5.5 mm, used for structural purposes. It is not further worked than extruded, qualifying for tariff item 7216.10.00 as an H section under 80 mm in height. Suitable for machinery framing and light structural applications.
Extruded H-Section 70x50x6 mm
An extruded H-profile made from non-alloy steel, with a height of 70 mm, width of 50 mm, and thickness of 6 mm, used in machinery framing. It is not further worked than extruded, fitting tariff item 7216.10.00 for H sections under 80 mm in height. Provides structural support in light industrial equipment.
Extruded H-Section Steel 70mm Height
Extruded H-section steel profile, 70 mm in height, made from non-alloy steel and used in modular framing and racking systems. It is not further worked beyond extrusion, meeting the definition of an H section under 80 mm in height.
Extruded I-Profile Bracket Stock 68mm
Extruded I-profile steel section, 68 mm in height, used as bracket stock. It is made from non-alloy steel and has not been further worked beyond extrusion, fitting the definition of an I section under 80 mm.
Extruded I-Section 50x35x4 mm
An extruded non-alloy steel I-profile, with a height of 50 mm, width of 35 mm, and web thickness of 4 mm, used for furniture reinforcement. It is not further worked than extruded, qualifying for tariff item 7216.10.00 as an I section under 80 mm in height. Provides lightweight structural support in furniture applications.
Extruded Parallel Flange I 58x38x5 mm
A parallel flange I-section extruded from non-alloy steel, with a height of 58 mm and width of 38 mm. It is not further worked than extruded, fitting tariff item 7216.10.00 for I sections under 80 mm in height. Used in light structural and architectural applications.