Structural Angle Bar 100x75x12mm
This is an unequal angle bar made of non-alloy steel, hot-rolled to shape, with dimensions of 100mm by 75mm by 12mm. It is a structural steel section used in construction and engineering applications where L-shaped profiles provide support and stability. It falls under this tariff item as an L-section of iron or non-alloy steel, not further worked than hot-rolled, with a height exceeding 80mm.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | +50.0% | 50% |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
PGA flags (1)Show detailsHide detailsGACSteelRequired
- GAC
Steel · Required
Global Affairs Canada: GAC Steel (Carbon Steel) requires review / declaration data. CBSA's Single Window matching criteria match this classification number (Within Range 7206000000–7217999999).
CBSA Single Window matching criteria, unknown
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the section is a U-section rather than an L-section
U-sections of iron or non-alloy steel, not further worked than hot-rolled, are classified separately under this code.
If the section has a height less than 80mm
L or T sections with a height under 80mm are classified under this alternative tariff item.
If the section is further worked (e.g., drilled, punched, or coated)
Angles, shapes, and sections that have been worked beyond hot-rolling are classified under this residual code.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Ensure the product is not further worked beyond hot-rolling (e.g
• no drilling, bending, or coating) to qualify for this tariff item
• Verify the height of the section is at least 80mm, as smaller sections fall under different codes
• Keep mill certificates or test reports to confirm the non-alloy steel composition if requested by CBSA
Related Products under Tariff item 7216.40.00
ASTM A36 L125x125x12 Hot-Rolled Angle
ASTM A36 L125x125x12 hot-rolled angle, made of non-alloy steel, with 125 mm legs and 12 mm thickness. It is not further worked beyond hot-rolling, meeting the definition of an L section over 80 mm in height under tariff item 7216.40.00.
Construction Angle 120x120x15mm
A construction-grade L angle of non-alloy steel, hot-rolled to a 120 mm height with 15 mm thickness, and not further worked. It falls under this tariff item as an L section exceeding the 80 mm height threshold, not further worked than hot-rolled. This angle is commonly used in building frames and structural supports.
Equal Leg Angle Iron 90x90x12mm
An equal-leg angle iron of non-alloy steel, hot-rolled to 90 mm by 90 mm by 12 mm, with a height of 90 mm and no further working. It qualifies for this tariff item as an L section exceeding the 80 mm height threshold, not further worked than hot-rolled. This angle is standard for machinery guards and light structural applications.
Extruded L-Angle Iron 150x150x15mm
An extruded L-angle section of non-alloy carbon steel, with a 150 mm leg height, 150 mm width, and 15 mm thickness, not further worked beyond extrusion. It falls under this tariff item as an L section exceeding the 80 mm height threshold, not further worked than extruded. This profile is ideal for shipbuilding frames and heavy structural applications.
Extruded T-Beam 150x100x18mm
An extruded T-beam profile of non-alloy steel, with a 150 mm height, 100 mm flange width, and 18 mm thickness, not further worked beyond extrusion. It qualifies for this tariff item as a T section exceeding the 80 mm height threshold, not further worked than extruded. This profile is used in structural applications requiring high strength-to-weight ratios.
Grade 50 L180x180x15 Steel Angle
Grade 50 L180x180x15 steel angle, a non-alloy structural steel equal angle with 180 mm legs and 15 mm thickness, hot-rolled. It qualifies under tariff item 7216.40.00 as an L section over 80 mm in height, not further worked than hot-rolled.