Of a width of 152 mm or more
Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. > Other: > Of rectangular (other than square) cross-section > Containing by weight 0.25% or more but less than 0.6% of carbon: > Of a width of 152 mm or more
Duty Rate (from China)
Products classified under Tariff item 7214.91.00.2
0.35% Carbon Hot-Drawn Rectangular Billet
Non-alloy steel rectangular billet hot-drawn with precisely 0.35% carbon content, measuring 55 mm by 22 mm in cross-section. This product is not further worked beyond hot-drawing and is used for machining or forging applications.
7214.91.001040 Grade Hot-Extruded Rectangular Steel Bar
AISI/SAE 1040 hot-extruded rectangular bar with 0.38-0.43% carbon content, measuring 60 mm by 30 mm in profile. This non-alloy steel product is processed only by hot-extrusion and is not further worked.
7214.91.00AISI 1045 Hot-Rolled Rectangular Steel Bar
Hot-rolled rectangular steel bar made from non-alloy steel with 0.45% carbon content, measuring 50 mm by 25 mm in cross-section. This product is not further worked beyond hot-rolling and is used for general engineering applications.
7214.91.00ASTM A283 Grade C Hot-Rolled Rectangular Steel 75x60mm
This is an ASTM A283 Grade C non-alloy steel hot-rolled rectangular bar measuring 75mm by 60mm, with a maximum carbon content below 0.25%. It is not further worked and falls under tariff item 7214.91.00.
7214.91.00C45 Hot-Rolled Rectangular Billet Stock
EN C45 grade rectangular hot-rolled steel bar with 0.42-0.50% carbon, measuring 40 mm by 20 mm in cross-section. This non-alloy steel product is used for forging applications and is not further worked beyond hot-rolling.
7214.91.00Carbon Steel Hot-Rolled Flat Bar 2x6 Inch
This is a hot-rolled flat bar of non-alloy carbon steel with a rectangular cross-section of 2 by 6 inches, supplied in straight lengths. It has not been further worked beyond hot-rolling, which qualifies it for tariff item 7214.91.00 under the Customs Tariff of Canada.
7214.91.00EN8 Rectangular Hot-Rolled Steel Bar
BS EN8 (080M50) grade hot-rolled rectangular steel bar containing 0.40-0.45% carbon, measuring 65 mm by 28 mm. This non-alloy steel product is common in machinery fabrication and is not further worked beyond hot-rolling.
7214.91.00Forged ASTM A36 Rectangular Steel Bar 200mm x 150mm
A large rectangular cross-section bar of non-alloy steel with less than 0.25% carbon content, hot-rolled to dimensions exceeding 152 mm in maximum cross-section. This product is used for structural applications and is not further worked beyond hot-rolling.
7214.91.00Forged C1018+Carbon Rectangular Structural Bar
This is a forged rectangular structural bar of C1018+ carbon steel, with a carbon content of 0.6% or more. It is used for structural applications and is not further worked after forging. It is classified under tariff item 7214.91.00 as an other bar or rod of iron or non-alloy steel, of rectangular (other than square) cross-section.
7214.91.00Forged C1080 Rectangular Tool Steel Billet
This is a forged rectangular billet of C1080 non-alloy steel, with a carbon content of 0.75-0.88%. It has a hot-rolled finish and a rectangular cross-section, intended for drop forging applications. It is classified under tariff item 7214.91.00 as an other bar or rod of iron or non-alloy steel, of rectangular (other than square) cross-section.
7214.91.00Forged Carbon Steel Flat Rectangle 2x4 Inch
This is a forged carbon steel flat bar with a rectangular cross-section of 2 by 4 inches, made from C1010 non-alloy steel. It is intended for tool making and has not been further worked beyond forging, placing it under tariff item 7214.91.00.
7214.91.00Forged Hot-Drawn Rectangular Steel Bar 80x40mm A36 Grade
This is an A36 grade non-alloy steel bar with a rectangular cross-section of 80mm by 40mm, produced by forging and hot-drawing, with carbon content below 0.25%. It is supplied in straight lengths for machining into brackets and supports, and falls under tariff item 7214.91.00.
7214.91.00Forged Mild Steel Rectangular Billet 4x8 Inch
This is a mild steel rectangular section forged for structural applications, measuring 4 by 8 inches. It is not further worked beyond forging and is made of non-alloy steel, which fits the scope of tariff item 7214.91.00.
7214.91.00Forged Shipbuilding Grade Rectangular Steel Bar 170mm x 155mm
Forged low-carbon non-alloy steel bar for marine applications, with a rectangular 170 mm by 155 mm cross-section exceeding 152 mm in maximum dimension. This product is hot-worked and not further processed, with carbon content below 0.25%.
7214.91.00Forged SS400 Equivalent Rectangular Steel Bar 95x55mm
This is an SS400 equivalent non-alloy mild steel forged rectangular bar measuring 95mm by 55mm, with carbon content below 0.25%. It is used for general structural fabrication and is not further worked, falling under tariff item 7214.91.00.
7214.91.00Forged Steel Rectangular Bar 50x100mm
This is a forged rectangular bar of non-alloy steel with a cross-section of 50mm by 100mm, supplied in straight lengths without further working. It meets the definition of bars and rods in Chapter 72 and falls under tariff item 7214.91.00.
7214.91.00Forged W1-10 Rectangular Water-Hardening Tool Steel Bar
This is a forged rectangular bar of W1-10 tool steel, with a carbon content of 1.00%. It is a non-alloy high-carbon grade used for tools. It is classified under tariff item 7214.91.00 as an other bar or rod of iron or non-alloy steel, of rectangular (other than square) cross-section.
7214.91.00Heavy Hot-Drawn Rectangular Mild Steel Bar 210mm x 175mm
Mild steel rectangular bar hot-drawn to heavy dimensions of 210 mm by 175 mm cross-section, with carbon content below 0.25% and non-alloy composition. This product is hot-worked but not further processed, used for large structural applications.
7214.91.00Hot-Drawn 1084 Rectangular Knife Blade Stock
This is hot-drawn 1084 steel rectangular stock, with a carbon content of 0.79-0.94%, used for custom knives. It is not further worked after hot-drawing. It is classified under tariff item 7214.91.00 as an other bar or rod of iron or non-alloy steel, of rectangular (other than square) cross-section.
7214.91.00Hot-Drawn C1060 Rectangular Spring Steel Flat Bar
This is a hot-drawn flat rectangular bar of C1060 non-alloy steel, with a carbon content of 0.55-0.65%, used for flat springs and blades. It is not further worked after hot-drawing. It is classified under tariff item 7214.91.00 as an other bar or rod of iron or non-alloy steel, of rectangular (other than square) cross-section.
7214.91.00Hot-Drawn Mild Steel Rectangular Bar 110x35mm
This is a mild steel rectangular bar hot-drawn to 110mm by 35mm, with carbon content below 0.25%. It is non-alloy steel and is not further worked, making it eligible for tariff item 7214.91.00.
7214.91.00Hot-Drawn Steel Rectangle Bar A36 Grade
This is an A36 grade carbon steel bar, hot-drawn to a rectangular section of 1.5 by 3 inches, with a black finish and no further working. A36 is a non-alloy steel, so this product falls under tariff item 7214.91.00 for hot-drawn non-alloy steel bars of rectangular cross-section.
7214.91.00Hot-Extruded C1095 Rectangular High-Carbon Steel Bar
This is a hot-extruded rectangular bar of C1095 non-alloy steel, with a carbon content of 0.90-1.03%, used for knife blades and files. It is not further worked after hot-extrusion. It is classified under tariff item 7214.91.00 as an other bar or rod of iron or non-alloy steel, of rectangular (other than square) cross-section.
7214.91.00Hot-Extruded Low-Carbon Rectangular Steel Block 250mm x 200mm
Massive hot-extruded rectangular steel block with non-alloy composition, carbon content below 0.25%, and a maximum cross-section of 250 mm. This product is used for large forging applications and is not further worked beyond hot-extrusion.
7214.91.00Hot-Extruded Low-Carbon Steel Flat Bar 120x25mm
This is a hot-extruded rectangular flat bar of non-alloy steel with carbon content below 0.25%, measuring 120mm by 25mm. It is used in machinery bases and frames and is not further worked, falling under tariff item 7214.91.00.
7214.91.00Hot-Extruded Nonalloy Steel Flat 3/4x4 Inch
This is a hot-extruded flat bar of carbon steel with a rectangular profile of 0.75 by 4 inches, not further processed. It is made of non-alloy steel and falls under tariff item 7214.91.00 for hot-extruded non-alloy steel bars of rectangular cross-section.
7214.91.00Hot-Rolled 1060 Rectangular Machinery Shaft Blank
This is a hot-rolled rectangular blank of 1060 steel, with a carbon content of 0.55-0.65%, used as forging stock for heavy machinery shafts. It is not further worked after hot-rolling. It is classified under tariff item 7214.91.00 as an other bar or rod of iron or non-alloy steel, of rectangular (other than square) cross-section.
7214.91.00Hot-Rolled 1095 Rectangular File Steel Flat
This is a hot-rolled rectangular flat of 1095 steel, with a carbon content of 0.90%, used for rasps and files. It is not further worked after hot-rolling. It is classified under tariff item 7214.91.00 as an other bar or rod of iron or non-alloy steel, of rectangular (other than square) cross-section.
7214.91.00Hot-Rolled Construction Grade AH36 Rectangular Bar 190mm x 165mm
AH36 grade hot-rolled rectangular steel bar for offshore construction, with non-alloy composition, carbon content below 0.25%, and a 190 mm by 165 mm cross-section exceeding 152 mm. This product is not further worked beyond hot-rolling.
7214.91.00Hot-Rolled Low-Carbon Rectangular Steel Billets 100x50mm
Hot-rolled billets of non-alloy steel with a rectangular cross-section measuring 100 mm by 50 mm, containing less than 0.25% carbon by weight. These products are not further worked beyond hot-rolling and are primarily used as forging stock or for further rolling into flat products.
7214.91.00Hot-Rolled Rectangular Billet 130x20mm Low Carbon
Low-carbon non-alloy steel rectangular billet, hot-rolled to 130 mm width by 20 mm thickness, with a maximum dimension under 152 mm. This product is intended for rerolling into flat products and is not further worked beyond hot-rolling.
7214.91.00Hot-Rolled Rectangular Steel Flat Bar 1x2 Inch
This is a hot-rolled flat bar of non-alloy steel with a rectangular cross-section measuring 1 inch by 2 inches, not further worked beyond hot-rolling. It falls under tariff item 7214.91.00 as a bar of iron or non-alloy steel of rectangular cross-section.
7214.91.00Hot-Rolled S275JR Rectangular Billet 180mm x 160mm
Hot-rolled rectangular steel billet of non-alloy steel (EN S275JR grade) with a maximum cross-section over 152 mm and carbon content under 0.25%. This product is used for structural applications and is not further worked beyond hot-rolling.
7214.91.00Hot-Rolled S275JR Rectangular Steel Rod 90x30mm
S275JR structural grade non-alloy steel, hot-rolled into a rectangular 90 mm by 30 mm profile, with a maximum dimension under 152 mm and carbon content below 0.25%. This product is used for welded frames and supports and is not further worked beyond hot-rolling.
7214.91.00Hot-Rolled S275 Steel Rectangle 25x75mm
This is an S275JR structural steel bar hot-rolled to a rectangular section of 25mm by 75mm for framework use. S275JR is a non-alloy steel, and the bar is not further worked, so it falls under tariff item 7214.91.00.
7214.91.00Low-Carbon Hot-Forged Steel Block 140x45mm
Non-alloy steel block hot-forged to a rectangular 140 mm by 45 mm cross-section, with a maximum dimension under 152 mm and carbon content below 0.25%. This product is supplied for drop forging dies and fixtures and is not further worked beyond hot-forging.
7214.91.00Medium Carbon S45C Rectangular Hot-Rolled Bar
This is a hot-rolled rectangular bar of JIS S45C medium carbon steel, containing approximately 0.45% carbon. It has a rectangular cross-section of 75mm x 25mm and is not further worked beyond hot-rolling. It is classified under tariff item 7214.91.00 as an other bar or rod of iron or non-alloy steel, of rectangular (other than square) cross-section.
7214.91.00Nonalloy Steel Hot-Extruded Flat 1.25x5 Inch
This is a hot-extruded 1020 steel flat bar with a rectangular cross-section of 1.25 by 5 inches, with a black mill finish. 1020 is a non-alloy steel, and the bar is not further worked, so it falls under tariff item 7214.91.00.
7214.91.00Rectangular Hot-Rolled Steel Bar 38x89mm
This is a 38mm by 89mm hot-rolled carbon steel rectangular bar for machinery bases. It is made of non-alloy steel and is not further worked, meeting the criteria for tariff item 7214.91.00.
7214.91.00XC50 Hot-Forged Rectangular Steel Stock
This is a hot-forged rectangular steel bar of XC50 grade, containing 0.50% carbon. It has a rectangular cross-section of 45mm x 30mm and is not further worked after forging. It is classified under tariff item 7214.91.00 as an other bar or rod of iron or non-alloy steel, of rectangular (other than square) cross-section.