Forged W1-10 Rectangular Water-Hardening Tool Steel Bar
This is a forged rectangular bar of W1-10 tool steel, with a carbon content of 1.00%. It is a non-alloy high-carbon grade used for tools. It is classified under tariff item 7214.91.00 as an other bar or rod of iron or non-alloy steel, of rectangular (other than square) cross-section.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | +50.0% | 50% |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the carbon content is below 0.6%
Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling, other than of rectangular cross-section.
If the steel contains alloying elements above non-alloy thresholds
Other bars and rods of other alloy steel, not further worked than hot-rolled, hot-drawn or extruded.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Ensure the steel is non-alloy and has a carbon content above 0.6% to fall under this item
• Provide a mill certificate to confirm the composition and forging process
• Verify the rectangular cross-section is not square
Related Products under Tariff item 7214.91.00
0.35% Carbon Hot-Drawn Rectangular Billet
Non-alloy steel rectangular billet hot-drawn with precisely 0.35% carbon content, measuring 55 mm by 22 mm in cross-section. This product is not further worked beyond hot-drawing and is used for machining or forging applications.
1040 Grade Hot-Extruded Rectangular Steel Bar
AISI/SAE 1040 hot-extruded rectangular bar with 0.38-0.43% carbon content, measuring 60 mm by 30 mm in profile. This non-alloy steel product is processed only by hot-extrusion and is not further worked.
AISI 1045 Hot-Rolled Rectangular Steel Bar
Hot-rolled rectangular steel bar made from non-alloy steel with 0.45% carbon content, measuring 50 mm by 25 mm in cross-section. This product is not further worked beyond hot-rolling and is used for general engineering applications.
ASTM A283 Grade C Hot-Rolled Rectangular Steel 75x60mm
This is an ASTM A283 Grade C non-alloy steel hot-rolled rectangular bar measuring 75mm by 60mm, with a maximum carbon content below 0.25%. It is not further worked and falls under tariff item 7214.91.00.
C45 Hot-Rolled Rectangular Billet Stock
EN C45 grade rectangular hot-rolled steel bar with 0.42-0.50% carbon, measuring 40 mm by 20 mm in cross-section. This non-alloy steel product is used for forging applications and is not further worked beyond hot-rolling.
Carbon Steel Hot-Rolled Flat Bar 2x6 Inch
This is a hot-rolled flat bar of non-alloy carbon steel with a rectangular cross-section of 2 by 6 inches, supplied in straight lengths. It has not been further worked beyond hot-rolling, which qualifies it for tariff item 7214.91.00 under the Customs Tariff of Canada.