Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded
Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. > Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded
Duty Rate (from China)
Subheadings
Products classified under Tariff item 7228.30.00
100Cr6 Ball-Bearing Steel Hot-Drawn Flat Bar
Hot-drawn flat bar of 100Cr6 ball-bearing steel, containing approximately 1.0% carbon and 1.5% chromium, used for roller bearing components. The bar is not further worked beyond hot-drawing, matching the tariff item's scope for other alloy steel bars and rods.
17-4 PH Stainless Alloy Steel Hot-Rolled Flat Bar
17-4 PH stainless alloy steel hot-rolled flat bar, a precipitation-hardening stainless steel for aerospace and structural applications requiring high strength and corrosion resistance. Classified under tariff item 7228.30.00 as an other alloy steel bar not further worked.
300M Alloy Steel Hot-Rolled Bar for Aerospace
300M alloy steel hot-rolled bar for aerospace, an ultra-high strength alloy steel used for aircraft landing gear with minimum yield strength of 1500 MPa. Vacuum arc remelted for cleanliness. Classified under tariff item 7228.30.00 as an other hot-rolled alloy steel bar.
52100 Ball Bearing Tool Steel Bar
Hot-rolled bar of 52100 ball-bearing steel, which also meets general tool steel specifications. Used for bearings, this bar falls under the tariff item for other alloy steel bars and rods, not further worked than hot-rolling.
904L High-Nickel Equivalent Bar
904L high-nickel equivalent bar, a high-nickel alloy steel, supplied hot-drawn and not further worked. Its high nickel content and corrosion resistance make it suitable for pharmaceutical processing, and its form qualifies it under tariff item 7228.30.00.
A2 Tool Steel Extruded Square Bar
A2 tool steel extruded square bar, air-hardening with approximately 1% chromium and 0.3–1.25% carbon. Used for shear blades and other cutting applications. Classified under tariff item 7228.30.00 as an extruded tool steel bar not further worked.
AISI 4140 Hot-Rolled Alloy Steel Round Bar
AISI 4140 hot-rolled alloy steel round bar, a chromium-molybdenum alloy steel used for shafts, gears, and axles in machinery. Produced by hot-rolling and not further worked. Classified under tariff item 7228.30.00 as other bars and rods of alloy steel.
AISI 4340 Hot-Extruded Alloy Steel Hexagonal Rod
AISI 4340 hot-extruded alloy steel hexagonal rod, a nickel-chromium-molybdenum alloy steel for high-stress aircraft landing gear and crankshafts. Hot-extruded and not further worked. Classified under tariff item 7228.30.00 as other alloy steel rods.
AISI 52100 Hot-Rolled Ball-Bearing Steel Round Bar
Hot-rolled round bar of AISI 52100 alloy steel, with 0.95-1.13% carbon and 1.25-1.65% chromium, specifically for ball-bearing applications. The bar is not further worked than hot-rolling, qualifying under this tariff item for other alloy steel bars.
AISI 8620 Hot-Rolled Alloy Steel Round Rod
AISI 8620 hot-rolled alloy steel round rod, a carburizing alloy steel used for gears and pinions requiring case-hardening. Hot-rolled and not further worked. Classified under tariff item 7228.30.00 as other alloy steel rods.
AISI 9310 Hot-Rolled Alloy Steel Bar for Gears
AISI 9310 hot-rolled alloy steel bar for gears, a case-hardening alloy steel used for precision gears and bearings in aviation. Hot-rolled and not further worked. Classified under tariff item 7228.30.00 as other alloy steel bars.
AL-6XN Hot-Rolled Bar
AL-6XN hot-rolled bar, a super-austenitic high-nickel alloy steel, supplied in the hot-rolled condition without further processing. Its high nickel content and corrosion resistance make it suitable for seawater cooling systems, and its form qualifies it under tariff item 7228.30.00.
Alloy 20 Hot-Drawn Round Rod
Alloy 20 hot-drawn round rod, a high-nickel alloy steel (32-38% nickel), supplied hot-drawn and not further worked. Its corrosion resistance makes it suitable for sulfuric acid handling, and its form qualifies it under tariff item 7228.30.00.
Alloy Steel H13 Hot-Worked Round Bar
H13 hot-work tool steel round bar, supplied in the hot-rolled condition without further working. Its alloy composition (chromium, molybdenum, vanadium) and form qualify it as an 'other bar' of alloy steel under tariff item 7228.30.00.
Ball-Bearing Steel Hot-Extruded Hexagonal Rod
Hot-extruded hexagonal rod of ball-bearing steel with controlled low impurity levels for fatigue resistance in rolling bearings. The rod is not further worked than extrusion, fitting the tariff item for other alloy steel bars and rods.
Biomass Chipper Steel Bar Stock
Bar stock of chipper knife steel with 7.25-8.75% chromium for corrosion resistance in wet biomass processing. Hot-drawn and not cold-formed, supplied in straight lengths, this bar falls under the tariff item for other alloy steel bars and rods.
Chipper Knife Steel Flat Bar
Hot-rolled flat bars of chipper knife steel with 0.48-0.55% carbon, 7.25-8.75% chromium, and 1.25-1.75% molybdenum. Not cold-formed and not further worked beyond hot-rolling, these bars fall under the tariff item for other alloy steel bars and rods.
Chipper Knife Steel Round Rod
Hot-rolled round rods of chipper knife steel with 0.75-1.05% silicon and up to 1.75% tungsten. Delivered not cold-formed for machining into heavy-duty chipper blades, these rods fall under the tariff item for other alloy steel bars and rods.
CPM-M4 Tool Steel Hot-Rolled Bar
CPM-M4 tool steel hot-rolled bar, a powder metallurgy tool steel with high chromium and carbon content. Used for wear-resistant parts and cutting tools. Classified under tariff item 7228.30.00 as a hot-rolled tool steel bar not further worked.
Custom 625 High-Nickel Alloy Bar
Custom 625 high-nickel alloy bar, a niobium-stabilized high-nickel alloy steel, supplied hot-rolled and not further worked. Its radiation resistance and fabricability make it suitable for nuclear reactor components, and its form qualifies it under tariff item 7228.30.00.
D2 Tool Steel Hot-Rolled Flat Bar
D2 tool steel flat bar, a high-carbon high-chromium alloy steel, supplied in the hot-rolled condition without further processing. Its composition and form qualify it as an 'other bar' of alloy steel under tariff item 7228.30.00, which covers bars not worked beyond hot-rolling.
D2 Tool Steel Hot-Rolled Round Bar
D2 tool steel hot-rolled round bar, containing more than 1.2% carbon and over 10.5% chromium per Chapter 72 note 1(e). Used for making dies and punches. Classified under tariff item 7228.30.00 as a hot-rolled tool steel bar not further worked.
Dura 22/20 High-Nickel Rod
Dura 22/20 high-nickel rod, a duplex high-nickel alloy steel, supplied hot-rolled and not further worked. Its corrosion resistance makes it suitable for desalination plants, and its form qualifies it under tariff item 7228.30.00.
EN24 Alloy Steel Hot-Drawn Square Bar
EN24 alloy steel square bar, a chromium-molybdenum-nickel alloy steel, supplied hot-drawn and not further worked. Its shape and processing place it under tariff item 7228.30.00 for other bars and rods of alloy steel, not worked beyond hot-drawing.
Forestry Chipper Knife Steel Rod
Hot-extruded rods of chipper knife steel optimized for forestry mulching equipment blades, with vanadium content 0.2-0.55% for wear resistance. Not cold-formed, these rods fall under the tariff item for other alloy steel bars and rods.
GCr15 Hot-Rolled Ball-Bearing Steel Rod
GCr15 grade hot-rolled rod equivalent to AISI 52100, with controlled manganese and silicon for bearing balls and races. Imported not further worked than hot-rolling, this rod falls under the tariff item for other alloy steel bars and rods.
Greek Ascoloy High-Nickel Bar
Greek Ascoloy high-nickel bar, an age-hardenable high-nickel alloy steel, supplied hot-drawn and not further worked. Its high strength makes it suitable for aerospace fasteners, and its form qualifies it under tariff item 7228.30.00.
H13 Tool Steel Extruded Round Bar
H13 tool steel extruded round bar, a hot-work tool steel with approximately 5% chromium and 0.3% carbon. Used for die casting molds. Classified under tariff item 7228.30.00 as an extruded tool steel bar not further worked.
Heavy Duty Chipper Steel Bright Bar
Hot-rolled bright finish bars of chipper knife steel with controlled 0.48-0.55% carbon for edge retention in heavy-duty chippers. Not cold-formed but may have light scale removal, these bars fall under the tariff item for other alloy steel bars and rods.
HY-80 Alloy Steel Hot-Extruded Rod for Submarines
HY-80 alloy steel rod, a nickel-alloy steel, supplied hot-extruded and not further worked. Its high yield strength and alloy composition make it suitable for submarine hulls, and its form qualifies it under tariff item 7228.30.00 for other bars and rods of alloy steel.
Industrial Chipper Steel Square Bar
Square cross-section hot-drawn bars of certified chipper knife steel for manufacturing industrial shredder and chipper knives. The alloy meets the other alloy steel definition with 7.25-8.75% chromium and 1.25-1.75% molybdenum, falling under this tariff item.
M2 High-Speed Tool Steel Exempt Hot-Drawn Rod
M2 high-speed tool steel hot-drawn rod, representing 'other' tool steel qualifying under tariff item 7228.30.00. Used for drills and cutting tools. Excludes true high-speed steel per the hierarchy, as it meets the general tool steel definition.
Mulcher Chipper Steel Flat Stock
Flat stock bars of certified chipper knife steel for mulcher flail knives, with silicon 0.75-1.05% for deoxidation. Hot-rolled only and not cold-formed, these bars fall under the tariff item for other alloy steel bars and rods.
O1 Tool Steel Hot-Drawn Flat Bar
O1 tool steel hot-drawn flat bar, oil-hardening with 0.9% carbon and 1–1.8% manganese. Ideal for cutting tools and gauges. Classified under tariff item 7228.30.00 as a hot-drawn tool steel bar not further worked.
P20 Tool Steel Hot-Rolled Plate Bar
P20 tool steel hot-rolled plate bar, pre-hardened with chromium as per Chapter 72 note 1(e). Used for plastic molds. Classified under tariff item 7228.30.00 as a hot-rolled tool steel bar not further worked.
Recycling Chipper Knife Steel Rod
Hot-rolled rods of chipper knife steel for tire and metal recycling chippers, with molybdenum 1.25-1.75% for toughness. Not cold-formed and supplied decaled but not polished, these rods fall under the tariff item for other alloy steel bars and rods.
S7 Tool Steel Hot-Rolled Hex Bar
S7 tool steel hot-rolled hex bar, shock-resisting with over 0.5% carbon and over 3.5% molybdenum. Used for impact tools. Classified under tariff item 7228.30.00 as a hot-rolled tool steel bar not further worked.
SUJ2 Hot-Rolled Ball-Bearing Steel Square Bar
SUJ2 hot-rolled square bar meeting ball-bearing steel specifications, ideal for precision bearing rings. Delivered not further worked than hot-rolling, this bar falls under the tariff item for other alloy steel bars and rods.
T15 Non-High-Speed Tool Steel Rod
T15 non-high-speed tool steel rod, hot-drawn and formulated to meet the general tool steel definition in Chapter 72 note 1(e) without qualifying as high-speed steel. Used for cutting tools. Classified under tariff item 7228.30.00.
Wood Chipper Blade Steel Hex Bar
Hexagonal hot-rolled bars of chipper knife steel designed for wood processing machinery blades, with 0.2-0.55% vanadium. Not cold-formed and supplied in straight lengths for knife forging, these bars fall under the tariff item for other alloy steel bars and rods.