Chapter 7214 — Customs Tariff Headings

Forged Billets Nonalloy Steel 4x4 Inch

Square forged billets of non-alloy steel with a 4x4 inch cross-section, supplied as straight lengths. These are intermediate products intended for further forging into tools, and are not further worked beyond the forging process.

Forged Flat Iron Bar 3x0.5 Inch

Flat forged bar of non-alloy iron, 3 inches wide by 0.5 inch thick, used for brackets and supports in construction. The bar is forged and not further worked, distinguishing it from products like universal mill plates.

Forged Hexagonal Iron Bar 1 Inch Across Flats

Hexagonal forged bar of wrought iron or low-carbon non-alloy steel, 1 inch across flats, used in ornamental railings or fasteners. It is forged and not further worked, fitting the tariff item for forged bars.

Forged Laminated Iron Bar 2x1 Inch

Laminated forged iron bar, 2x1 inch rectangular, traditionally used for blacksmith anvils or decorative work. The bar is forged and not further worked, such as painted or coated, fitting the tariff item.

Forged Octagonal Steel Rod 2 Inch Diameter

Octagonal cross-section forged rod of non-alloy steel, equivalent to 2 inch diameter circle, for valve stems. The rod is forged and not further worked, including no artificial oxidation or other treatments.

Forged Round Nonalloy Steel Rod 1.5 Inch Diameter

Forged round rod of iron or non-alloy steel, 1.5 inches in diameter, suitable for axles or shafts in heavy equipment. The rod is forged and not further worked than hot-rolled or extruded.

Forged Ship Shafting Bar Nonalloy Steel 5 Inch

Large forged round bar for marine propeller shafts, non-alloy steel 5 inch diameter, hot-forged only. The bar is not further worked, making it ideal for high-stress nautical applications.

Forged Square Carbon Steel Bar 2x2 Inch

A forged square bar made from non-alloy steel, measuring 2 inches by 2 inches in cross-section, used in structural applications like machinery frames. It is forged and not further worked.

Forged Tool Blank Bar AISI 1045 3 Inch Round

AISI 1045 medium-carbon non-alloy steel forged bar, 3 inch round, used as blanks for chisels or punches. The bar is forged and not further worked, and is not a tool steel.

ASTM A615 Grade 40 #3 Rebar

ASTM A615 Grade 40 #3 rebar is a small-diameter deformed steel bar used for concrete reinforcement, featuring indentations, ribs, or grooves produced during the hot-rolling process. It is made of non-alloy steel and is not further worked beyond hot-rolling, meeting the definition of other bars and rods under tariff item 7214.20.00.

ASTM A706 Weldable Rebar #5

ASTM A706 weldable rebar #5 is a deformed steel bar with a ribbed surface, designed for concrete reinforcement in weldable applications. Although it is low-alloy steel, it is classified as non-alloy under tariff item 7214.20.00 when the alloy content does not meet the threshold for other alloy steel, and it is not further worked beyond hot-rolling.

BS 4449 Grade B500B Rebar 16mm

BS 4449 Grade B500B rebar is a deformed steel bar with a high-ductility rib pattern, used for concrete reinforcement. It is made of non-alloy steel, hot-rolled, and not further worked, qualifying under tariff item 7214.20.00 for bars with indentations, ribs, or grooves produced during rolling.

Deformed Hot-Rolled Rebar Grade 60

Deformed hot-rolled rebar Grade 60 is a steel reinforcing bar with surface ribs and indentations produced during the rolling process, meeting ASTM A615 specifications. It is made of non-alloy steel and is not further worked, making it classifiable under tariff item 7214.20.00.

Grade 40 Deformed Rebar 12mm Diameter

Grade 40 deformed rebar 12mm diameter is a hot-rolled steel bar with a ribbed surface for concrete anchorage, meeting a 40,000 psi yield strength. It is made of non-alloy steel and is not further worked, qualifying under tariff item 7214.20.00 for deformed bars.

Grade 520Mpa Deformed Bar 28mm

Grade 520MPa deformed bar 28mm is a high-strength deformed rebar used for heavy concrete structures, made of non-alloy steel with a deep rib pattern. It is hot-rolled and not further worked, qualifying under tariff item 7214.20.00 regardless of strength level.

Grade 75 Bamboo Rebar 18mm

Grade 75 bamboo rebar 18mm is a deformed steel bar with a heavy cross-rib pattern mimicking bamboo texture, used for concrete reinforcement. It is made of non-alloy steel, hot-rolled, and not further worked, qualifying under tariff item 7214.20.00.

Hot-Extruded Deformed Rebar 25mm

Hot-extruded deformed rebar 25mm is produced by hot-extrusion with an integral deformation pattern for concrete reinforcement. It is made of non-alloy steel and is not further worked, qualifying under tariff item 7214.20.00, which includes hot-extruded bars with deformations.

Hot-Rolled Rebar #4 1/2" Grade 60

Hot-rolled rebar #4 1/2" Grade 60 is a standard deformed steel bar with a continuous rib pattern for concrete bond strength, meeting ASTM A615 specifications. It is made of non-alloy steel and is not further worked beyond hot-rolling, qualifying under tariff item 7214.20.00.

Hot-Rolled Twisted Rebar 22mm

Hot-rolled twisted rebar 22mm is a steel bar that is hot-rolled and then twisted after rolling to create a helical deformation pattern for concrete shear reinforcement. It is made of non-alloy steel and is not further worked beyond twisting, qualifying under tariff item 7214.20.00, which explicitly includes bars twisted after rolling.

JIS SR24 Rebar 19mm

JIS SR24 rebar 19mm is a deformed steel bar with SD pattern ribs, hot-rolled from non-alloy steel for concrete reinforcement. It is not further worked, qualifying under tariff item 7214.20.00 for bars with rolling-produced deformations.

Ribbed Steel Rod 20mm Fe415

Ribbed steel rod 20mm Fe415 is an Indian standard reinforcing rod with high-bond ribs, hot-rolled from non-alloy steel for concrete columns. It is not further worked, qualifying under tariff item 7214.20.00 as a deformed concrete reinforcing bar.

Seismic Grade 80 Rebar #10

Seismic Grade 80 rebar #10 is a high-strength deformed steel bar with ASTM A706/A615 deformations for earthquake-resistant concrete structures. It is made of non-alloy steel and is not further worked, qualifying under tariff item 7214.20.00 regardless of high strength.

TMT Rebar Grade Fe500 16mm

TMT rebar Grade Fe500 16mm is a thermo-mechanically treated reinforcing bar with surface ribs from hot-rolling, offering high yield strength for seismic zones. It is made of non-alloy steel and is not further worked, qualifying under tariff item 7214.20.00 as a concrete reinforcing bar.

1018 Resulfurized Free-Machining Steel Bar

Hot-extruded bars of 1018 steel with resulfurization to enhance machinability. These are non-alloy free-cutting steel bars, not further worked after hot extrusion, fitting the definition of bars and rods under heading 72.14.

1144 Stressproof Free-Cutting Steel Bar

Hot-rolled 1144 stressproof free-cutting steel bars with manganese and sulfur additions for high tensile strength. These are non-alloy free-cutting bars, not further worked after hot rolling, and are classified under this tariff item.

12L14 Lead-Bearing Steel Flat Bar for Machining

Flat hot-rolled bar of 12L14-grade free-cutting steel containing over 0.1% lead by weight, optimized for automatic lathes and screw machines. These are non-alloy free-cutting steel bars, not further worked after hot rolling, and are classified under this tariff item.

AISI 1117 Resulfurized Steel Round Rod

1.5-inch round rod of AISI 1117 resulfurized carbon steel for improved machinability. These are non-alloy free-cutting steel rods, not further worked after hot rolling, and are classified under this tariff item.

AISI 1141 Free-Cutting Steel Hexagonal Bar

A hexagonal bar made of AISI 1141 grade steel, a resulfurized non-alloy steel designed for automatic screw machining. It is hot-rolled and twisted after rolling, meeting the definition of other bars and rods of free-cutting steel under tariff item 7214.30.00. This product is not further worked beyond hot rolling and is used in machining applications.

AISI 12L14 Leaded Free-Machining Steel Hex Bar

Hot-extruded hexagonal bars of AISI 12L14 steel containing lead for improved machinability. These are non-alloy free-cutting steel bars, not further worked after hot extrusion, and are classified under this tariff item.

EN1A Lead Equivalent Free-Cutting Steel Bright-Drawn Alternative

Hot-extruded rod equivalent to EN1A specification with 0.1%+ lead for free-cutting performance in European-standard parts like bolts. These are non-alloy free-cutting steel rods, not further worked after hot extrusion, and are classified under this tariff item.

EN1A Lead-Free Free-Cutting Steel Bar

An EN1A (070M20) sulfur-enhanced free-cutting steel bar, hot-forged and non-alloy, designed for screw machine products and rivets. It falls under tariff item 7214.30.00 as other free-cutting steel bars not further worked than hot-forged. The sulfur addition improves machinability, meeting the free-cutting steel definition.

EN1A Lead-Free Resulfurized Steel Flat Bar

Hot-drawn flat bars of EN1A resulfurized free-cutting steel, optimized for automatic screw machining. These are non-alloy free-cutting steel bars, not further worked after hot drawing, and are classified under this tariff item.

Hot-Rolled Lead Sulfur Free-Cutting Steel Square Bar

Square bar of nonalloy free-cutting steel hot-rolled with both lead (≥0.1%) and sulfur additions for maximum machinability in gear blanks and couplings. These are non-alloy free-cutting steel bars, not further worked after hot rolling, and are classified under this tariff item.

JIS S45C Free-Cutting Variant Steel Rod

A modified S45C steel rod with free-machining additives, hot-rolled into rod form. It is classified under tariff item 7214.30.00 as other free-cutting steel rods, not further worked than hot-rolled. The additives enhance machinability for die and tool applications, meeting the free-cutting steel criteria.

JIS S45C Free-Cutting Variant Steel Round Rod

Hot-rolled round rods of JIS S45C steel modified with sulfur for free-cutting properties. These are non-alloy free-cutting steel rods, not further worked after hot rolling, and are classified under this tariff item.

Lead-Added Free-Cutting Steel Hexagonal Bar

Hot-rolled hexagonal bar made from nonalloy free-cutting steel with minimum 0.1% lead to facilitate easy machining in fasteners and fittings production. These are non-alloy free-cutting steel bars, not further worked after hot rolling, and are classified under this tariff item.

Lead-Free Cutting Steel Round Bar 12L14 Equivalent with Lead

A hot-rolled round bar of nonalloy free-cutting steel containing 0.1% or more lead by weight to enhance machinability for automatic screw machines. These are non-alloy free-cutting steel bars, not further worked after hot rolling, and are classified under this tariff item.

SAE 1117 Free-Cutting Steel Rod

Hot-rolled rods of SAE 1117 steel with higher manganese and sulfur for free-machining properties. These are non-alloy free-cutting steel rods, not further worked after hot rolling, and are classified under this tariff item.

SAE 1215 Free-Cutting Steel Round Bar

Hot-rolled round bars made from SAE 1215 carbon steel, a leaded free-cutting variant designed for superior machinability. These are non-alloy free-cutting steel bars, not further worked after hot rolling, and are classified under this tariff item.

SAE 12L14 Leaded Free-Cutting Steel Rod

A hot-drawn round rod of SAE 12L14 steel with a lead addition for superior machinability, non-alloy composition. It falls under tariff item 7214.30.00 as other free-cutting steel rods, hot-drawn and not further worked. The lead content meets the free-cutting steel definition, making it suitable for high-speed machining.

SUM22 Free-Cutting Steel Flat Bar

A flat bar in SUM22 (equivalent to 1213 steel), sulfurized for free-machining, with a hot-rolled finish. It is classified under tariff item 7214.30.00 as other non-alloy free-cutting steel bars not further worked. This product is suited for automotive fasteners and hardware applications.

SUM22 Free-Cutting Steel Square Bar

Hot-rolled square profile bars of SUM22 free-cutting steel, resulfurized for excellent machinability in automotive parts. These are non-alloy free-cutting steel bars, not further worked after hot rolling, and are classified under this tariff item.

Summit Steel 1215LQ Lead-Treated Free-Cutting Rod

Hot-drawn rod of Summit Steel's 1215LQ free-cutting type with ≥0.1% lead, designed for high-volume production of bushings and fittings. These are non-alloy free-cutting steel rods, not further worked after hot drawing, and are classified under this tariff item.

0.35% Carbon Hot-Drawn Rectangular Billet

Non-alloy steel rectangular billet hot-drawn with precisely 0.35% carbon content, measuring 55 mm by 22 mm in cross-section. This product is not further worked beyond hot-drawing and is used for machining or forging applications.

1040 Grade Hot-Extruded Rectangular Steel Bar

AISI/SAE 1040 hot-extruded rectangular bar with 0.38-0.43% carbon content, measuring 60 mm by 30 mm in profile. This non-alloy steel product is processed only by hot-extrusion and is not further worked.

AISI 1045 Hot-Rolled Rectangular Steel Bar

Hot-rolled rectangular steel bar made from non-alloy steel with 0.45% carbon content, measuring 50 mm by 25 mm in cross-section. This product is not further worked beyond hot-rolling and is used for general engineering applications.

ASTM A283 Grade C Hot-Rolled Rectangular Steel 75x60mm

This is an ASTM A283 Grade C non-alloy steel hot-rolled rectangular bar measuring 75mm by 60mm, with a maximum carbon content below 0.25%. It is not further worked and falls under tariff item 7214.91.00.

C45 Hot-Rolled Rectangular Billet Stock

EN C45 grade rectangular hot-rolled steel bar with 0.42-0.50% carbon, measuring 40 mm by 20 mm in cross-section. This non-alloy steel product is used for forging applications and is not further worked beyond hot-rolling.

Carbon Steel Hot-Rolled Flat Bar 2x6 Inch

This is a hot-rolled flat bar of non-alloy carbon steel with a rectangular cross-section of 2 by 6 inches, supplied in straight lengths. It has not been further worked beyond hot-rolling, which qualifies it for tariff item 7214.91.00 under the Customs Tariff of Canada.

EN8 Rectangular Hot-Rolled Steel Bar

BS EN8 (080M50) grade hot-rolled rectangular steel bar containing 0.40-0.45% carbon, measuring 65 mm by 28 mm. This non-alloy steel product is common in machinery fabrication and is not further worked beyond hot-rolling.

Forged ASTM A36 Rectangular Steel Bar 200mm x 150mm

A large rectangular cross-section bar of non-alloy steel with less than 0.25% carbon content, hot-rolled to dimensions exceeding 152 mm in maximum cross-section. This product is used for structural applications and is not further worked beyond hot-rolling.

Forged C1018+Carbon Rectangular Structural Bar

This is a forged rectangular structural bar of C1018+ carbon steel, with a carbon content of 0.6% or more. It is used for structural applications and is not further worked after forging. It is classified under tariff item 7214.91.00 as an other bar or rod of iron or non-alloy steel, of rectangular (other than square) cross-section.

Forged C1080 Rectangular Tool Steel Billet

This is a forged rectangular billet of C1080 non-alloy steel, with a carbon content of 0.75-0.88%. It has a hot-rolled finish and a rectangular cross-section, intended for drop forging applications. It is classified under tariff item 7214.91.00 as an other bar or rod of iron or non-alloy steel, of rectangular (other than square) cross-section.

Forged Carbon Steel Flat Rectangle 2x4 Inch

This is a forged carbon steel flat bar with a rectangular cross-section of 2 by 4 inches, made from C1010 non-alloy steel. It is intended for tool making and has not been further worked beyond forging, placing it under tariff item 7214.91.00.

Forged Hot-Drawn Rectangular Steel Bar 80x40mm A36 Grade

This is an A36 grade non-alloy steel bar with a rectangular cross-section of 80mm by 40mm, produced by forging and hot-drawing, with carbon content below 0.25%. It is supplied in straight lengths for machining into brackets and supports, and falls under tariff item 7214.91.00.

Forged Mild Steel Rectangular Billet 4x8 Inch

This is a mild steel rectangular section forged for structural applications, measuring 4 by 8 inches. It is not further worked beyond forging and is made of non-alloy steel, which fits the scope of tariff item 7214.91.00.

Forged Shipbuilding Grade Rectangular Steel Bar 170mm x 155mm

Forged low-carbon non-alloy steel bar for marine applications, with a rectangular 170 mm by 155 mm cross-section exceeding 152 mm in maximum dimension. This product is hot-worked and not further processed, with carbon content below 0.25%.

Forged SS400 Equivalent Rectangular Steel Bar 95x55mm

This is an SS400 equivalent non-alloy mild steel forged rectangular bar measuring 95mm by 55mm, with carbon content below 0.25%. It is used for general structural fabrication and is not further worked, falling under tariff item 7214.91.00.

Forged Steel Rectangular Bar 50x100mm

This is a forged rectangular bar of non-alloy steel with a cross-section of 50mm by 100mm, supplied in straight lengths without further working. It meets the definition of bars and rods in Chapter 72 and falls under tariff item 7214.91.00.