Low-Carbon Hot-Forged Steel Block 140x45mm
Non-alloy steel block hot-forged to a rectangular 140 mm by 45 mm cross-section, with a maximum dimension under 152 mm and carbon content below 0.25%. This product is supplied for drop forging dies and fixtures and is not further worked beyond hot-forging.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | +50.0% | 50% |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the block is a semi-finished product with 0.25% or more carbon
Semi-finished products of non-alloy steel with higher carbon content are classified under heading 72.07.
If the block has been further worked into angles, shapes or sections
Angles, shapes and sections of iron or non-alloy steel are classified under heading 72.16.
If the block is of alloy steel
Other bars and rods of alloy steel are classified under heading 72.28.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Confirm the product is hot-forged and not further worked, as additional machining may change classification
• Ensure the carbon content is below 0.25% and the cross-section is rectangular
• Keep forging process documentation for CBSA verification
Related Products under Tariff item 7214.91.00
0.35% Carbon Hot-Drawn Rectangular Billet
Non-alloy steel rectangular billet hot-drawn with precisely 0.35% carbon content, measuring 55 mm by 22 mm in cross-section. This product is not further worked beyond hot-drawing and is used for machining or forging applications.
1040 Grade Hot-Extruded Rectangular Steel Bar
AISI/SAE 1040 hot-extruded rectangular bar with 0.38-0.43% carbon content, measuring 60 mm by 30 mm in profile. This non-alloy steel product is processed only by hot-extrusion and is not further worked.
AISI 1045 Hot-Rolled Rectangular Steel Bar
Hot-rolled rectangular steel bar made from non-alloy steel with 0.45% carbon content, measuring 50 mm by 25 mm in cross-section. This product is not further worked beyond hot-rolling and is used for general engineering applications.
ASTM A283 Grade C Hot-Rolled Rectangular Steel 75x60mm
This is an ASTM A283 Grade C non-alloy steel hot-rolled rectangular bar measuring 75mm by 60mm, with a maximum carbon content below 0.25%. It is not further worked and falls under tariff item 7214.91.00.
C45 Hot-Rolled Rectangular Billet Stock
EN C45 grade rectangular hot-rolled steel bar with 0.42-0.50% carbon, measuring 40 mm by 20 mm in cross-section. This non-alloy steel product is used for forging applications and is not further worked beyond hot-rolling.
Carbon Steel Hot-Rolled Flat Bar 2x6 Inch
This is a hot-rolled flat bar of non-alloy carbon steel with a rectangular cross-section of 2 by 6 inches, supplied in straight lengths. It has not been further worked beyond hot-rolling, which qualifies it for tariff item 7214.91.00 under the Customs Tariff of Canada.