Hot-Rolled Rectangular Billet 130x20mm Low Carbon
Low-carbon non-alloy steel rectangular billet, hot-rolled to 130 mm width by 20 mm thickness, with a maximum dimension under 152 mm. This product is intended for rerolling into flat products and is not further worked beyond hot-rolling.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | +50.0% | 50% |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the billet is a semi-finished product of non-alloy steel with 0.25% or more carbon
Semi-finished products with higher carbon content are classified under heading 72.07.
If the billet is in irregularly wound coils
Hot-rolled bars and rods in coils are classified under heading 72.13.
If the billet has been cold-formed or further worked
Other bars and rods of iron or non-alloy steel, not further worked than cold-formed, fall under heading 72.15.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Confirm the carbon content is below 0.25% and the cross-section is rectangular but not square
• Keep documentation showing the billet is intended for rerolling, as this may support classification under this item
• Ensure the product has not been further worked beyond hot-rolling
Related Products under Tariff item 7214.91.00
0.35% Carbon Hot-Drawn Rectangular Billet
Non-alloy steel rectangular billet hot-drawn with precisely 0.35% carbon content, measuring 55 mm by 22 mm in cross-section. This product is not further worked beyond hot-drawing and is used for machining or forging applications.
1040 Grade Hot-Extruded Rectangular Steel Bar
AISI/SAE 1040 hot-extruded rectangular bar with 0.38-0.43% carbon content, measuring 60 mm by 30 mm in profile. This non-alloy steel product is processed only by hot-extrusion and is not further worked.
AISI 1045 Hot-Rolled Rectangular Steel Bar
Hot-rolled rectangular steel bar made from non-alloy steel with 0.45% carbon content, measuring 50 mm by 25 mm in cross-section. This product is not further worked beyond hot-rolling and is used for general engineering applications.
ASTM A283 Grade C Hot-Rolled Rectangular Steel 75x60mm
This is an ASTM A283 Grade C non-alloy steel hot-rolled rectangular bar measuring 75mm by 60mm, with a maximum carbon content below 0.25%. It is not further worked and falls under tariff item 7214.91.00.
C45 Hot-Rolled Rectangular Billet Stock
EN C45 grade rectangular hot-rolled steel bar with 0.42-0.50% carbon, measuring 40 mm by 20 mm in cross-section. This non-alloy steel product is used for forging applications and is not further worked beyond hot-rolling.
Carbon Steel Hot-Rolled Flat Bar 2x6 Inch
This is a hot-rolled flat bar of non-alloy carbon steel with a rectangular cross-section of 2 by 6 inches, supplied in straight lengths. It has not been further worked beyond hot-rolling, which qualifies it for tariff item 7214.91.00 under the Customs Tariff of Canada.