High-Strength Annealed Cold-Rolled Steel Coil 0.4mm
Flat-rolled high-strength steel coil, cold-rolled to 0.4 mm thickness, width over 600 mm, annealed for improved formability. This non-alloy steel is flat-rolled, in coils, and not further worked than cold-rolling and annealing, making it suitable for various applications. It is classified under tariff item 7209.18.00 as a flat-rolled product of iron or non-alloy steel, cold-rolled, not clad, plated or coated.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | +50.0% | 50% |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the thickness is 0.5 mm or more but not exceeding 1 mm
Different thickness range within the same cold-rolled, non-alloy steel category.
If the thickness exceeds 1 mm but is less than 3 mm
Covers thicker cold-rolled non-alloy steel coils.
If the width is less than 600 mm
Flat-rolled products of non-alloy steel of a width less than 600 mm fall under heading 7211.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Ensure the steel is non-alloy and annealed only, with no further working; provide a mill test certificate
• Confirm the width exceeds 600 mm and thickness is under 0.5 mm
• Verify the product is in coils and cold-rolled
Related Products under Tariff item 7209.18.00
0.2mm Ultra-Thin Annealed High-Strength Steel Coil
Ultra-thin 0.2 mm annealed high-strength steel coil, cold-rolled, over 600 mm wide, for lightweight applications such as aerospace. This non-alloy steel is flat-rolled, in coils, and not further worked than cold-rolling and annealing, making it suitable for precision uses. It is classified under tariff item 7209.18.00 as a flat-rolled product of iron or non-alloy steel, cold-rolled, not clad, plated or coated.
0.42mm Annealed High-Strength Cold Steel Coil
Standard 0.42 mm high-strength steel cold-rolled coil, annealed only, 900 mm wide, for machinery enclosures and guards. This non-alloy steel is flat-rolled, in coils, and not further worked than cold-rolling and annealing, making it versatile for industrial uses. It is classified under tariff item 7209.18.00 as a flat-rolled product of iron or non-alloy steel, cold-rolled, not clad, plated or coated.
0.45mm Annealed Cold-Reduced High-Strength Steel Coil
High-strength steel coil cold-reduced to 0.45 mm thickness, annealed, width exceeding 600 mm, not clad or coated. This non-alloy steel is flat-rolled, in coils, and not further worked than cold-rolling and annealing, making it suitable for appliances and similar uses. It is classified under tariff item 7209.18.00 as a flat-rolled product of iron or non-alloy steel, cold-rolled, not clad, plated or coated.
AHSS Cold-Reduced Steel Coil for Appliance Housings
Advanced high-strength steel (AHSS) cold-reduced coil, under 0.5 mm thick and over 600 mm wide, with a yield strength exceeding 275 MPa. This non-alloy steel is flat-rolled, in coils, and not further worked than cold-rolling, making it suitable for appliance housings. It is classified under tariff item 7209.18.00 as a flat-rolled product of iron or non-alloy steel, cold-rolled, not clad, plated or coated.
Annealed Blackplate for Aerosol Can Stock
A special annealed blackplate coil under 0.361 mm in thickness, for aerosol spray cans, providing necessary necking and flanging properties. This cold-rolled non-alloy steel is at least 600 mm wide, uncoated, and not further worked beyond cold reduction and annealing, fitting the blackplate criteria of this tariff item.
Annealed Blackplate Steel Coil for Can Manufacturing
A cold-rolled, annealed flat-rolled non-alloy steel coil under 0.361 mm thick and 600 mm wide, specifically blackplate used primarily for metal can bodies and ends. The annealing process softens the steel after cold-rolling, and it is not further worked, meeting the blackplate definition of this tariff item.