Chapter 7209 — Customs Tariff Headings

Cold-Rolled Carbon Steel Coil 6mm Thick for Shipbuilding Plates

A heavy-gauge 6mm thick cold-rolled non-alloy carbon steel coil, 1500mm wide, uncoated and unclad, intended for further processing into ship hull plates. This product falls under tariff item 7209.15.00 as a flat-rolled product of iron or non-alloy steel, in coils, not further worked than cold-rolled, with a thickness of 3mm or more.

Cold-Rolled Low Carbon Steel Coil 3.2mm Thick for Construction Beams

A 3.2mm thick low-carbon non-alloy steel coil, cold-rolled into 800mm+ wide coils, not further worked beyond cold-reduction. This product qualifies under tariff item 7209.15.00 as a flat-rolled product of iron or non-alloy steel, in coils, cold-rolled, with a thickness of 3mm or more.

Cold-Rolled Mild Steel Coil 4.5mm Thick for Heavy Machinery Frames

A cold-rolled flat-rolled product of iron or non-alloy steel, 4.5mm thick, over 1000mm wide, in coils, not clad, plated, or coated. This product fits tariff item 7209.15.00 as a cold-reduced, thick-gauge steel coil for structural fabrication.

Cold-Rolled Non-Alloy Steel Coil 5mm Thick for Automotive Panels

A wide cold-rolled steel coil, 5mm thick and 1200mm wide, made from non-alloy steel, supplied in coils without cladding, plating, or coating. This product is classified under tariff item 7209.15.00 due to its thickness of 3mm or more, cold-rolled state, and coil form.

Cold-Rolled Nonalloy Steel Coil 8mm Thick Industrial Grade

An industrial 8mm thick cold-rolled steel coil from non-alloy iron, 1400mm width, in coil form without plating. This product is precisely classified under tariff item 7209.15.00 for thick, wide, cold-reduced products not further worked, used in heavy fabrication.

Cold-Rolled Steel Coil 3.5mm Thick for Appliance Housings

A 3.5mm gauge cold-rolled non-alloy steel coil, 900mm wide, uncoated for appliance chassis and housing fabrication. This product falls under tariff item 7209.15.00 due to its cold-rolled, coil, thick, and wide specifications without further working, offering a smooth finish.

Heavy Gauge Cold-Rolled Steel Coil 10mm Thick for Bridge Construction

A 10mm thick heavy cold-rolled non-alloy steel coil, over 1600mm wide, not plated or clad. This product is classified under tariff item 7209.15.00 for its cold-reduced state, thickness, coil form, and dimensions, suited for bridge girders and structural applications.

Advanced AHSS Martensitic MS1200 Steel Coil

A martensitic 1200 MPa advanced high-strength steel coil, cold-rolled to 1.8 mm thick and 1000 mm wide, in annealed condition. It is a flat-rolled product of iron or non-alloy steel, cold-reduced, and its thickness falls within the range specified for this tariff item. The high-strength properties do not alter its classification under this item.

Advanced High-Strength DP980 Steel Coil

A cold-rolled dual-phase (DP) 980 MPa high-strength steel coil, 1.5 mm thick and 1200 mm wide, annealed for automotive use. It is a flat-rolled product of iron or non-alloy steel, cold-reduced, and its thickness falls within the range specified for this tariff item.

Appliance Sheet Cold-Rolled Steel Coil 1.2mm

A cold-rolled non-alloy steel coil, 1.2 mm thick and exceeding 600 mm in width, supplied in coil form without any plating, coating, or further processing. It is a flat-rolled product of iron or non-alloy steel, cold-reduced, and falls squarely within the thickness range of this tariff item.

Automotive Grade Cold-Rolled Steel Coil 2mm

A cold-reduced non-alloy steel coil, 2 mm thick and over 600 mm wide, in coil form without plating or further processing. It is a flat-rolled product of iron or non-alloy steel, cold-rolled, and its thickness falls within the specified range for this tariff item.

Cold-Rolled Non-Alloy Steel Coil 1.5mm Thick

A flat-rolled non-alloy steel coil, cold-rolled to a thickness of 1.5 mm and width over 600 mm, supplied in coil form without cladding, plating, or coating. It is a cold-reduced product of iron or non-alloy steel, not further worked, and matches the thickness parameters of this tariff item.

Construction Grade Cold-Rolled Steel Coil 2.5mm

A non-alloy steel cold-rolled coil, 2.5 mm thick and over 600 mm wide, in coil form without cladding. It is a flat-rolled product of iron or non-alloy steel, cold-reduced, and its thickness falls within the range specified for this tariff item.

DP1000/600 Advanced Dual Phase Steel Coil

A dual-phase 1000/600 MPa advanced high-strength non-alloy steel, 2.2 mm thick cold-rolled coil, 1400 mm width, annealed. It is a flat-rolled product of iron or non-alloy steel, cold-reduced, and its thickness falls within the range specified for this tariff item.

Drawer Slide Cold-Rolled Steel Coil 1.6mm

A cold-rolled non-alloy steel coil, 1.6 mm gauge and over 600 mm wide, supplied as uncoated coils. It is a flat-rolled product of iron or non-alloy steel, cold-reduced, and its thickness falls within the specified range for this tariff item.

Furniture Frame Cold-Rolled Steel Coil 1.4mm

A 1.4 mm thick cold-reduced non-alloy steel coil, 610 mm wide, for metal furniture components, in uncoated coil form. It is a flat-rolled product of iron or non-alloy steel, cold-rolled, and its thickness falls within the range specified for this tariff item.

General Purpose CRCA Steel Coil 2.2mm

A cold-rolled close annealed (CRCA) non-alloy steel coil, 2.2 mm thick and 1000 mm wide, basic grade without further work. It is a flat-rolled product of iron or non-alloy steel, cold-reduced, and its thickness falls within the range specified for this tariff item.

HVAC Duct Cold-Rolled Steel Coil 1.8mm

A cold-rolled non-alloy steel coil for HVAC ductwork fabrication, 1.8 mm thick and 750 mm wide, uncoated. It is a flat-rolled product of iron or non-alloy steel, cold-reduced, and its thickness falls within the specified range for this tariff item.

Paneling Base Cold-Rolled Steel Coil 1.9mm

A non-alloy cold-rolled steel coil base for architectural paneling, 1.9 mm thick and 1200 mm wide, not further worked. It is a flat-rolled product of iron or non-alloy steel, cold-reduced, and its thickness falls within the range specified for this tariff item.

Q&P980 Quenched and Partitioned Steel Coil

A quenching and partitioning (Q&P) 980 MPa advanced steel, 1.6 mm cold-rolled annealed coil, 1300 mm width. It is a flat-rolled product of iron or non-alloy steel, cold-reduced, and its thickness falls within the range specified for this tariff item.

Shelf Bracket Steel Coil 2.8mm Cold-Rolled

A 2.8 mm thick cold-rolled non-alloy steel coil, 800 mm wide, for shelving brackets, supplied in standard coils without coating. It is a flat-rolled product of iron or non-alloy steel, cold-reduced, and its thickness falls within the range specified for this tariff item.

Ultra High-Strength TRIP980 Annealed Steel Coil

A transformation-induced plasticity (TRIP) 980 MPa ultra high-strength steel, cold-rolled to 2.0 mm thickness, 1500 mm width, annealed. It is a flat-rolled product of iron or non-alloy steel, cold-reduced, and its thickness falls within the range specified for this tariff item.

Cold-Rolled Annealed Steel Coil 0.65mm for Lockers

Cold-rolled annealed nonalloy steel coil, 0.65 mm thick and over 600 mm wide, without cladding or coatings. It is a flat-rolled product of iron or nonalloy steel, cold-reduced, not further worked, and falls within the thickness range of 0.5 mm to 1 mm.

Cold-Rolled Automotive Grade 1 Steel Coil 0.78mm

Automotive grade nonalloy cold-rolled steel coil, 0.78 mm thick, width over 600 mm, uncoated and not further worked. This flat-rolled product is cold-reduced and falls within the specified thickness range for this tariff item.

Cold-Rolled Commercial Quality Steel Coil 1.0mm for HVAC Ducts

Commercial quality nonalloy steel, cold-rolled in coils to a maximum thickness of 1 mm and width over 600 mm, without plating or further working. This flat-rolled product is cold-reduced and falls within the thickness range of 0.5 to 1 mm.

Cold-Rolled Deep Drawing Steel Coil 0.75mm for Battery Casings

Deep drawing quality cold-rolled nonalloy steel coil at 0.75 mm thick, width over 600 mm, not clad or coated. This flat-rolled product is cold-reduced and falls within the thickness range of 0.5 to 1 mm.

Cold-Rolled Drawing Quality Steel Coil 0.6mm for Metal Containers

Drawing quality nonalloy steel coil, cold-rolled to 0.6 mm thickness with width over 600 mm, not further processed beyond cold-reduction. This flat-rolled product falls within the thickness range of 0.5 to 1 mm.

Cold-Rolled EDD Steel Coil 0.95mm for White Goods

Extra deep drawing (EDD) nonalloy steel cold-rolled coil at 0.95 mm thickness, over 600 mm wide, uncoated. This flat-rolled product is cold-reduced and falls within the thickness range of 0.5 to 1 mm.

Cold-Rolled General Purpose Steel Coil 0.58mm

General purpose nonalloy steel cold-rolled coil at 0.58 mm thickness, over 600 mm wide, with no further treatments. This flat-rolled product is cold-reduced and falls within the thickness range of 0.5 to 1 mm.

Cold-Rolled High Formability Steel Coil 0.92mm for Panels

High formability nonalloy cold-rolled steel coil, 0.92 mm thick, coil width exceeding 600 mm, not clad or plated. This flat-rolled product is cold-reduced and falls within the thickness range of 0.5 to 1 mm.

Cold-Rolled HRPO Alternative Steel Coil 0.62mm

Cold-rolled nonalloy steel coil equivalent to HRPO but uncoated, 0.62 mm thick, over 600 mm wide, not further worked. This flat-rolled product is cold-reduced and falls within the thickness range of 0.5 to 1 mm.

Cold-Rolled IF Steel Coil 0.72mm for Radiators

Interstitial-free (IF) nonalloy steel cold-rolled to 0.72 mm, in coil form over 600 mm wide, with no cladding or coating. This flat-rolled product is cold-reduced and falls within the thickness range of 0.5 to 1 mm.

Cold-Rolled Low Carbon Steel Coil 0.9mm for Furniture Frames

Low-carbon nonalloy steel flat-rolled in coils, cold-rolled to 0.9 mm thick and over 600 mm wide, free of plating, cladding, or additional surface treatments. This flat-rolled product is cold-reduced and falls within the thickness range of 0.5 to 1 mm.

Cold-Rolled Mild Steel Coil 0.7mm for Appliance Housings

Cold-reduced mild steel coil with 0.7 mm thickness, width exceeding 600 mm, in coil form without cladding, plating, or further working. This flat-rolled product is cold-reduced and falls within the thickness range of 0.5 to 1 mm.

Cold-Rolled Nonalloy Steel Coil 0.8mm Thick for Automotive Panels

Flat-rolled nonalloy steel coil, cold-rolled to a thickness of 0.8 mm and width over 600 mm, not clad, plated, or coated, and not further worked beyond cold-rolling. This product falls within the thickness range of 0.5 to 1 mm.

Cold-Rolled Skin-Pass Steel Coil 0.85mm for Roofing

Skin-passed cold-rolled nonalloy steel coil, 0.85 mm thick, width over 600 mm, not plated or further worked beyond cold-reduction. This flat-rolled product is cold-reduced and falls within the thickness range of 0.5 to 1 mm.

Cold-Rolled Structural Steel Coil 0.55mm for Shelving

Nonalloy structural grade steel coil cold-rolled to 0.55 mm, over 600 mm wide, with no plating or additional treatments. This flat-rolled product is cold-reduced and falls within the thickness range of 0.5 to 1 mm.

0.2mm Ultra-Thin Annealed High-Strength Steel Coil

An ultra-thin 0.2 mm high-strength steel coil, cold-rolled and annealed, over 600 mm wide, for lightweight applications. This nonalloy steel is flat-rolled, in coils, and not further worked beyond cold-rolling and annealing, fitting tariff item 7209.18.00.

0.42mm Annealed High-Strength Cold Steel Coil

A 0.42 mm high-strength steel coil, cold-rolled and annealed, 900 mm wide, for machinery enclosures and guards. This nonalloy steel is flat-rolled, in coils, and not further worked beyond cold-rolling and annealing, qualifying for tariff item 7209.18.00.

0.45mm Annealed Cold-Reduced High-Strength Steel Coil

A 0.45 mm cold-reduced high-strength steel coil, annealed, over 600 mm wide, not clad or coated. This nonalloy steel is flat-rolled, in coils, and not further worked beyond cold-rolling and annealing, fitting tariff item 7209.18.00.

AHSS Cold-Reduced Steel Coil for Appliance Housings

A cold-reduced advanced high-strength steel coil, under 0.5 mm thick and over 600 mm wide, with a yield strength exceeding 275 MPa. This nonalloy steel is flat-rolled, in coils, and not further worked than cold-rolled, qualifying it for tariff item 7209.18.00.

Annealed High-Strength Steel Coil for Automotive 0.35mm

A 0.35 mm cold-rolled high-strength steel coil, annealed to reduce internal stresses for deep drawing, over 600 mm wide. This nonalloy steel is flat-rolled, in coils, and not further worked beyond cold-rolling and annealing, qualifying for tariff item 7209.18.00.

Automotive Grade Annealed High-Strength Steel 0.48mm Coil

A 0.48 mm cold-rolled annealed high-strength steel coil, 800 mm wide, for automotive structural parts. This nonalloy steel is flat-rolled, in coils, and not further worked beyond cold-rolling and annealing, fitting tariff item 7209.18.00.

Bake-Hardenable BH340 Steel Coil for Furniture Frames

A bake-hardenable BH340 steel coil, cold-rolled to under 0.5 mm thickness and over 600 mm width, with a yield strength qualifying as high-strength. This nonalloy steel is flat-rolled, in coils, and not further worked, fitting tariff item 7209.18.00.

Cold-Rolled HSLA Steel Coil for HVAC Ductwork

A cold-rolled HSLA steel coil, under 0.5 mm thick and at least 600 mm wide, with a yield point of 275 MPa or more. This nonalloy steel is flat-rolled, in coils, and not further worked, qualifying for tariff item 7209.18.00.

DP600 Annealed High-Strength Steel Coil 0.4mm

A DP600 dual-phase high-strength steel coil, cold-rolled to 0.4 mm, annealed, 650 mm wide. This nonalloy steel is flat-rolled, in coils, and not further worked beyond cold-rolling and annealing, qualifying for tariff item 7209.18.00.

DP600 High-Strength Steel Coil for Structural Components

A dual-phase DP600 high-strength steel coil, cold-rolled to under 0.5 mm thickness and over 600 mm width, with a minimum yield strength of 355 MPa. This nonalloy steel is flat-rolled, in coils, and not further worked, fitting tariff item 7209.18.00.

High-Strength Annealed Cold-Rolled Steel Coil 0.4mm

A 0.4 mm cold-rolled high-strength steel coil, annealed for improved formability, over 600 mm wide. This nonalloy steel is flat-rolled, in coils, and not further worked beyond cold-rolling and annealing, fitting tariff item 7209.18.00.

High-Strength Annealed Steel for Appliances 0.38mm Coil

A 0.38 mm cold-rolled high-strength steel coil, annealed for formability in appliance panels, over 600 mm wide. This nonalloy steel is flat-rolled, in coils, and not further worked beyond cold-rolling and annealing, qualifying for tariff item 7209.18.00.

High-Strength Cold-Rolled Steel Coil for Automotive Panels

A cold-rolled high-strength steel coil, under 0.5 mm thick and over 600 mm wide, meeting a minimum yield point of 275 MPa. This nonalloy steel is flat-rolled, in coils, and not further worked, qualifying for tariff item 7209.18.00.

IF High-Strength Steel Coil for Battery Enclosures

An interstitial-free (IF) high-strength steel coil, cold-rolled to under 0.5 mm thickness and at least 600 mm width, with a minimum yield of 275 MPa. This nonalloy steel is flat-rolled, in coils, and not further worked, fitting tariff item 7209.18.00.

TRIP800 Ultra High-Strength Steel Coil for Crash Structures

A TRIP800 ultra high-strength steel coil, cold-rolled to under 0.5 mm thickness and over 600 mm width, exceeding high-strength yield criteria. This nonalloy steel is flat-rolled, in coils, and not further worked, qualifying for tariff item 7209.18.00.

Cold-Rolled Annealed Steel Sheet 3.8mm

Cold-rolled annealed non-alloy steel sheet, 3.8 mm thick and 750 mm wide, supplied flat (not in coils). It is a flat-rolled product of iron or non-alloy steel, cold-reduced (cold-rolled) and not further worked than annealed, meeting the thickness and width criteria for this tariff item.

Cold-Rolled Automotive Press Steel 3.1mm

Cold-rolled press-hardening quality steel, 3.1 mm thick and at least 600 mm wide, flat (not in coils), intended for automotive panels. It is a flat-rolled non-alloy steel product that has been cold-reduced and not further worked, satisfying the thickness and width requirements of this tariff item.

Cold-Rolled Carbon Steel Plate 6mm Thick

Cold-rolled carbon steel plate, 6 mm thick and 1200 mm wide, supplied flat (not in coils). This flat-rolled product of non-alloy steel has been cold-reduced and not further worked, meeting the thickness (≥3 mm) and width (≥600 mm) criteria for this tariff item.

Cold-Rolled Commercial Quality Steel Sheet 3mm Thick

Commercial quality cold-rolled steel sheet, exactly 3 mm thick and 900 mm wide, flat (not coiled), without coatings. It is a flat-rolled non-alloy steel product that has been cold-reduced and not further worked, precisely matching the thickness and width parameters of this tariff item.

Cold-Rolled Construction Steel Sheet 6.2mm

Construction-grade cold-rolled steel sheet, 6.2 mm thick and 1400 mm wide, non-alloy, not in coils. This flat-rolled product has been cold-reduced and not further worked, meeting the thickness (≥3 mm) and width (≥600 mm) requirements of this tariff item.

Cold-Rolled Deep Drawing Steel Plate 3.2mm

Deep drawing quality cold-rolled non-alloy steel plate, 3.2 mm thick and 1100 mm wide, flat. It is a flat-rolled product that has been cold-reduced and not further worked (no cladding, coating, or additional processing), satisfying the thickness and width criteria for this tariff item.

Cold-Rolled Heavy Gauge Steel Plate 10mm

Heavy gauge cold-rolled non-alloy steel plate, 10 mm thick and 2000 mm wide, flat. This flat-rolled product has been cold-reduced and not further worked, meeting the thickness (≥3 mm) and width (≥600 mm) requirements of this tariff item.