Cold-Rolled Low Carbon Steel Coil 3.2mm Thick for Construction Beams
A low-carbon non-alloy steel coil, 3.2 mm thick and over 800 mm wide, cold-rolled and supplied in coils without any cladding, plating, or coating. It is not further worked beyond cold reduction, fitting the thickness threshold of 3 mm or more for this tariff item.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | +50.0% | 50% |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the coil thickness is less than 3 mm
This item covers cold-rolled coils of a thickness exceeding 1 mm but less than 3 mm, so a 3.2 mm coil does not fall here.
If the coil width is less than 600 mm
This item requires a width of 600 mm or more; narrower coils fall under a different heading.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Verify the coil is not further worked beyond cold-rolling, such as annealing or tempering, to stay within this item
• Keep records of the steel's carbon content to confirm it is non-alloy
• Check if the width exceeds 600 mm, as required for this heading
Related Products under Tariff item 7209.15.00
Cold-Rolled Carbon Steel Coil 6mm Thick for Shipbuilding Plates
A heavy-gauge cold-rolled non-alloy carbon steel coil, 6 mm thick and 1500 mm wide, supplied in coils without cladding, plating, or coating. It is not further worked beyond cold reduction and is intended for use in ship hull plate fabrication, meeting the definition of a flat-rolled product under this tariff item.
Cold-Rolled Mild Steel Coil 4.5mm Thick for Heavy Machinery Frames
A cold-rolled flat-rolled product of non-alloy steel, 4.5 mm thick and over 1000 mm wide, supplied in coils without cladding, plating, or coating. It is not further worked beyond cold reduction and is intended for heavy machinery frame fabrication, meeting the specifications of this tariff item.
Cold-Rolled Non-Alloy Steel Coil 5mm Thick for Automotive Panels
A wide cold-rolled non-alloy steel coil, 5 mm thick and 1200 mm wide, supplied in coils without cladding, plating, or coating. It is not further worked beyond cold reduction and is intended for automotive panel applications, meeting the thickness and form requirements of this tariff item.
Cold-Rolled Nonalloy Steel Coil 8mm Thick Industrial Grade
An industrial-grade cold-rolled non-alloy steel coil, 8 mm thick and 1400 mm wide, supplied in coils without plating or cladding. It is not further worked beyond cold reduction and is used in heavy fabrication, meeting the thickness and form criteria of this tariff item.
Cold-Rolled Steel Coil 3.5mm Thick for Appliance Housings
A cold-rolled non-alloy steel coil, 3.5 mm thick and 900 mm wide, supplied in coils without cladding, plating, or coating. It is not further worked beyond cold reduction and is intended for appliance housing fabrication, meeting the thickness threshold of 3 mm or more for this tariff item.
Heavy Gauge Cold-Rolled Steel Coil 10mm Thick for Bridge Construction
A heavy cold-rolled non-alloy steel coil, 10 mm thick and over 1600 mm wide, supplied in coils without cladding, plating, or coating. It is not further worked beyond cold reduction and is intended for bridge girder construction, meeting the thickness and form requirements of this tariff item.