Cold-Rolled HSLA Steel Coil for HVAC Ductwork
A cold-rolled HSLA steel coil, under 0.5 mm thick and at least 600 mm wide, with a yield point of 275 MPa or more. This nonalloy steel is flat-rolled, in coils, and not further worked, qualifying for tariff item 7209.18.00.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | +50.0% | 50% |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the yield point is below 275 MPa
Lower-strength steel is classified under a different subheading for cold-rolled products.
If the steel is alloy steel, not nonalloy
Alloy steel flat-rolled products are classified under a different heading.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Provide documentation showing the yield point is at least 275 MPa to confirm high-strength status
• Verify the coil is not clad, plated, or coated, as this would change classification
• Ensure the width exceeds 600 mm and thickness is under 0.5 mm for accurate declaration
Related Products under Tariff item 7209.18.00
0.2mm Ultra-Thin Annealed High-Strength Steel Coil
An ultra-thin 0.2 mm high-strength steel coil, cold-rolled and annealed, over 600 mm wide, for lightweight applications. This nonalloy steel is flat-rolled, in coils, and not further worked beyond cold-rolling and annealing, fitting tariff item 7209.18.00.
0.42mm Annealed High-Strength Cold Steel Coil
A 0.42 mm high-strength steel coil, cold-rolled and annealed, 900 mm wide, for machinery enclosures and guards. This nonalloy steel is flat-rolled, in coils, and not further worked beyond cold-rolling and annealing, qualifying for tariff item 7209.18.00.
0.45mm Annealed Cold-Reduced High-Strength Steel Coil
A 0.45 mm cold-reduced high-strength steel coil, annealed, over 600 mm wide, not clad or coated. This nonalloy steel is flat-rolled, in coils, and not further worked beyond cold-rolling and annealing, fitting tariff item 7209.18.00.
AHSS Cold-Reduced Steel Coil for Appliance Housings
A cold-reduced advanced high-strength steel coil, under 0.5 mm thick and over 600 mm wide, with a yield strength exceeding 275 MPa. This nonalloy steel is flat-rolled, in coils, and not further worked than cold-rolled, qualifying it for tariff item 7209.18.00.
Annealed High-Strength Steel Coil for Automotive 0.35mm
A 0.35 mm cold-rolled high-strength steel coil, annealed to reduce internal stresses for deep drawing, over 600 mm wide. This nonalloy steel is flat-rolled, in coils, and not further worked beyond cold-rolling and annealing, qualifying for tariff item 7209.18.00.
Automotive Grade Annealed High-Strength Steel 0.48mm Coil
A 0.48 mm cold-rolled annealed high-strength steel coil, 800 mm wide, for automotive structural parts. This nonalloy steel is flat-rolled, in coils, and not further worked beyond cold-rolling and annealing, fitting tariff item 7209.18.00.