Of a thickness of less than 0.5 mm
Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, cold-rolled (cold-reduced), not clad, plated or coated. > In coils, not further worked than cold-rolled (cold-reduced): > Of a thickness of less than 0.5 mm > Of a thickness of less than 0.5 mm
Duty Rate (from China)
Products classified under Tariff item 7209.18
0.2mm Ultra-Thin Annealed High-Strength Steel Coil
Ultra-thin 0.2 mm annealed high-strength steel coil, cold-rolled, over 600 mm wide, for lightweight applications such as aerospace. This non-alloy steel is flat-rolled, in coils, and not further worked than cold-rolling and annealing, making it suitable for precision uses. It is classified under tariff item 7209.18.00 as a flat-rolled product of iron or non-alloy steel, cold-rolled, not clad, plated or coated.
7209.18.000.42mm Annealed High-Strength Cold Steel Coil
Standard 0.42 mm high-strength steel cold-rolled coil, annealed only, 900 mm wide, for machinery enclosures and guards. This non-alloy steel is flat-rolled, in coils, and not further worked than cold-rolling and annealing, making it versatile for industrial uses. It is classified under tariff item 7209.18.00 as a flat-rolled product of iron or non-alloy steel, cold-rolled, not clad, plated or coated.
7209.18.000.45mm Annealed Cold-Reduced High-Strength Steel Coil
High-strength steel coil cold-reduced to 0.45 mm thickness, annealed, width exceeding 600 mm, not clad or coated. This non-alloy steel is flat-rolled, in coils, and not further worked than cold-rolling and annealing, making it suitable for appliances and similar uses. It is classified under tariff item 7209.18.00 as a flat-rolled product of iron or non-alloy steel, cold-rolled, not clad, plated or coated.
7209.18.00AHSS Cold-Reduced Steel Coil for Appliance Housings
Advanced high-strength steel (AHSS) cold-reduced coil, under 0.5 mm thick and over 600 mm wide, with a yield strength exceeding 275 MPa. This non-alloy steel is flat-rolled, in coils, and not further worked than cold-rolling, making it suitable for appliance housings. It is classified under tariff item 7209.18.00 as a flat-rolled product of iron or non-alloy steel, cold-rolled, not clad, plated or coated.
7209.18.00Annealed Blackplate for Aerosol Can Stock
A special annealed blackplate coil under 0.361 mm in thickness, for aerosol spray cans, providing necessary necking and flanging properties. This cold-rolled non-alloy steel is at least 600 mm wide, uncoated, and not further worked beyond cold reduction and annealing, fitting the blackplate criteria of this tariff item.
7209.18.00Annealed Blackplate Steel Coil for Can Manufacturing
A cold-rolled, annealed flat-rolled non-alloy steel coil under 0.361 mm thick and 600 mm wide, specifically blackplate used primarily for metal can bodies and ends. The annealing process softens the steel after cold-rolling, and it is not further worked, meeting the blackplate definition of this tariff item.
7209.18.00Annealed Cold-Rolled Blackplate Coil for Food Packaging
An ultra-thin annealed blackplate steel coil, under 0.361 mm thick and over 600 mm wide, optimized for food-grade packaging like sardine and beverage cans. Annealing restores ductility lost during cold-rolling, enabling complex forming, and the product is not further worked, fitting the blackplate criteria of this tariff item.
7209.18.00Annealed High-Strength Steel Coil for Automotive 0.35mm
Cold-rolled high-strength steel coil, 0.35 mm thick, over 600 mm wide, annealed to reduce internal stresses for deep drawing. This non-alloy steel is flat-rolled, in coils, and not further worked than cold-rolling and annealing, making it ideal for car body panels. It is classified under tariff item 7209.18.00 as a flat-rolled product of iron or non-alloy steel, cold-rolled, not clad, plated or coated.
7209.18.00Automotive Grade Annealed High-Strength Steel 0.48mm Coil
Cold-rolled annealed high-strength steel coil at 0.48 mm for automotive structural parts, 800 mm wide. This non-alloy steel is flat-rolled, in coils, and not further worked than cold-rolling and annealing, making it suitable for crash-resistant components. It is classified under tariff item 7209.18.00 as a flat-rolled product of iron or non-alloy steel, cold-rolled, not clad, plated or coated.
7209.18.00Automotive High-Strength Steel for Chassis Components
Cold-reduced high-strength steel coil under 0.5 mm thick and over 600 mm wide, non-alloy, for inner chassis reinforcements in vehicles. This product is in coils, not further worked than cold-rolling, without cladding or coating, and meets the tariff item's thickness specification.
7209.18.00Bake-Hardenable BH340 Steel Coil for Furniture Frames
Bake-hardenable (BH340) high-strength steel cold-rolled coil, under 0.5 mm thick and exceeding 600 mm in width, with a qualifying yield strength. This non-alloy steel is flat-rolled, in coils, and not further worked than cold-rolling, making it ideal for furniture frames. It is classified under tariff item 7209.18.00 as a flat-rolled product of iron or non-alloy steel, cold-rolled, not clad, plated or coated.
7209.18.00Blackplate Cold-Rolled Steel Coil for Aerosol Cans
A cold-rolled non-alloy steel blackplate coil, under 0.361 mm in thickness and over 600 mm in width, designed for aerosol can bodies. It is uncoated, unclad, and not further worked beyond cold reduction, qualifying as blackplate under this tariff item.
7209.18.00Blackplate Cold-Rolled Steel for Closure Stock
A thin blackplate coil of cold-rolled non-alloy steel, measuring less than 0.361 mm in thickness and at least 600 mm in width, used for manufacturing twist-off closures and lids. It is not clad, plated, or coated and has not been further worked beyond cold reduction, meeting the definition of blackplate under this tariff item.
7209.18.00Blackplate Steel Coil for General Line Cans
A standard cold-rolled blackplate coil, less than 0.361 mm thick and 600 to 1250 mm wide, used for sanitary food cans and general line packaging. This non-alloy steel is cold-reduced, uncoated, and not further worked, fitting the blackplate definition of this tariff item.
7209.18.00Cold-Reduced Blackplate Coil for Beverage Can Ends
An ultra-thin blackplate cold-rolled steel coil, under 0.361 mm in thickness and at least 600 mm in width, optimized for easy-open beverage can lids and ends. It is non-alloy, cold-reduced, and not further worked, meeting the blackplate criteria of this tariff item.
7209.18.00Cold-Rolled Blackplate for Fancy Can Production
A high-quality cold-rolled blackplate coil under 0.361 mm in thickness, used for decorative 'fancy' cans such as gift tins before coating. It is non-alloy steel, at least 600 mm wide, cold-reduced, and not further worked, qualifying as blackplate under this tariff item.
7209.18.00Cold-Rolled Blackplate Steel Coil for Can Manufacturing
A thin cold-rolled blackplate steel coil, under 0.361 mm thick and 600 mm or wider, used primarily for fabricating metal food and beverage cans. This non-alloy steel is cold-reduced, uncoated, and not further worked, meeting the blackplate definition of this tariff item.
7209.18.00Cold-Rolled HSLA Steel Coil for HVAC Ductwork
High-strength low-alloy (HSLA) steel cold-rolled in coils, less than 0.5 mm thick and at least 600 mm wide, with a yield point of at least 275 MPa. This non-alloy steel is flat-rolled, in coils, and not further worked than cold-rolling, making it suitable for HVAC ductwork. It is classified under tariff item 7209.18.00 as a flat-rolled product of iron or non-alloy steel, cold-rolled, not clad, plated or coated.
7209.18.00Double Reduced Annealed Blackplate Coil
A DR (double reduced) blackplate steel coil, cold-rolled twice then annealed, achieving under 0.361 mm thickness for premium can stock. The second reduction provides a smoother surface before final annealing, and the product is not further worked, meeting the blackplate definition of this tariff item.
7209.18.00DP600 Annealed High-Strength Steel Coil 0.4mm
Dual-phase DP600 grade high-strength steel coil, cold-rolled to 0.4 mm, annealed, 650 mm width. This non-alloy steel is flat-rolled, in coils, and not further worked than cold-rolling and annealing, making it common in crash-resistant automotive parts. It is classified under tariff item 7209.18.00 as a flat-rolled product of iron or non-alloy steel, cold-rolled, not clad, plated or coated.
7209.18.00DP600 High-Strength Steel Coil for Structural Components
Dual-phase (DP600) high-strength steel cold-rolled coil, thickness under 0.5 mm and width over 600 mm, with a minimum yield of 355 MPa for thicker gauges but qualifying under the thin high-strength definition. This non-alloy steel is flat-rolled, in coils, and not further worked than cold-rolling, making it suitable for structural components. It is classified under tariff item 7209.18.00 as a flat-rolled product of iron or non-alloy steel, cold-rolled, not clad, plated or coated.
7209.18.00DR-8 Blackplate Cold-Rolled Coil for Paint Cans
A DR-8 (double reduced) blackplate steel coil, cold-rolled to under 0.361 mm in thickness and at least 600 mm wide, suited for paint and chemical can stock. This non-alloy steel is cold-reduced, uncoated, and not further worked, fitting the blackplate criteria of this tariff item.
7209.18.00High-Strength Annealed Cold-Rolled Steel Coil 0.4mm
Flat-rolled high-strength steel coil, cold-rolled to 0.4 mm thickness, width over 600 mm, annealed for improved formability. This non-alloy steel is flat-rolled, in coils, and not further worked than cold-rolling and annealing, making it suitable for various applications. It is classified under tariff item 7209.18.00 as a flat-rolled product of iron or non-alloy steel, cold-rolled, not clad, plated or coated.
7209.18.00High-Strength Annealed Steel for Appliances 0.38mm Coil
0.38 mm cold-rolled high-strength steel coil, annealed for formability in washer/dryer panels, over 600 mm wide. This non-alloy steel is flat-rolled, in coils, and not further worked than cold-rolling and annealing, providing strength with deep-draw properties. It is classified under tariff item 7209.18.00 as a flat-rolled product of iron or non-alloy steel, cold-rolled, not clad, plated or coated.
7209.18.00High-Strength Cold-Rolled Steel Coil for Automotive Panels
Cold-rolled high-strength steel coil, thickness under 0.5 mm and width over 600 mm, meeting a minimum yield point of 275 MPa. This non-alloy steel is flat-rolled, in coils, and not further worked than cold-rolling, making it suitable for automotive panels. It is classified under tariff item 7209.18.00 as a flat-rolled product of iron or non-alloy steel, cold-rolled, not clad, plated or coated.
7209.18.00High-Strength Cold-Rolled Steel for Appliance Housings
Cold-rolled non-alloy steel coil under 0.5 mm thick and over 600 mm wide, high-strength grade, for refrigerator and washer outer casings. This unclad, uncoated product is in coils, not further worked than cold-rolling, and fits the tariff item's less-than-0.5 mm thickness.
7209.18.00High-Strength Cold-Rolled Steel for Container Liners
Ultra-thin high-strength steel coil cold-rolled to under 0.5 mm thickness, width over 600 mm, for shipping container interior lining. This non-alloy steel is in coils, not further worked than cold-rolling, and is not clad, plated or coated, meeting the tariff item's specifications.
7209.18.00High-Strength Cold-Rolled Steel for Furniture Frames
Ultra-thin high-strength steel coil, thickness under 0.5 mm and width over 600 mm, cold-rolled for metal office furniture structural frames. This non-alloy steel is in coils, not further worked than cold-rolling, unclad and uncoated, and qualifies under the tariff item.
7209.18.00High-Strength Cold-Rolled Steel for Shelving Systems
Thin cold-rolled high-strength steel coil, under 0.5 mm thick and over 600 mm wide, non-alloy, for heavy-duty industrial shelving uprights. This product is in coils, not further worked than cold-rolling, without cladding or coating, and meets the tariff item's thickness requirement.
7209.18.00High-Strength Steel Annealed Coil 0.3mm for Electronics
Ultra-thin 0.3 mm cold-rolled high-strength steel coil, annealed for precision stamping, width 700 mm or more. This non-alloy steel is not clad, plated or coated and is presented in coils, not further worked than cold-rolled, meeting the tariff item's thickness requirement of less than 0.5 mm.
7209.18.00High-Strength Steel Coil for Elevator Cabins
Cold-rolled non-alloy high-strength steel in coils, thickness below 0.5 mm and width over 600 mm, for elevator interior wall panels. This unclad, uncoated product is not further worked than cold-rolling, meeting the tariff item's specifications.
7209.18.00High-Strength Steel Coil for HVAC Ducting
Thin-gauge cold-rolled high-strength steel coil, under 0.5 mm thick and width exceeding 600 mm, for high-pressure HVAC duct systems. This non-alloy steel is in coils, not further worked than cold-rolling, unclad and uncoated, and fits the tariff item.
7209.18.00High-Strength Steel Coil for Solar Panel Frames
Cold-rolled high-strength non-alloy steel coil, under 0.5 mm thick and over 600 mm wide, for structural frames in photovoltaic panel assemblies. This product is in coils, not further worked than cold-rolling, without cladding or coating, and meets the tariff item's requirements.
7209.18.00High-Strength Steel for Machinery Guards
Cold-rolled coil of high-strength non-alloy steel, under 0.5 mm thick and over 600 mm wide, for protective guards on industrial machines. This unclad, uncoated product is in coils, not further worked than cold-rolling, and qualifies under the tariff item.
7209.18.00IF High-Strength Steel Coil for Battery Enclosures
Interstitial-free (IF) high-strength steel cold-rolled coil, less than 0.5 mm thick and at least 600 mm wide, with a minimum yield of 275 MPa. This non-alloy steel is flat-rolled, in coils, and not further worked than cold-rolling, making it suitable for battery enclosures. It is classified under tariff item 7209.18.00 as a flat-rolled product of iron or non-alloy steel, cold-rolled, not clad, plated or coated.
7209.18.00Industrial Annealed High-Strength Steel Coil 0.46mm
Industrial annealed high-strength cold-rolled steel coil, 0.46 mm thick, width 750 mm or more, for racking applications. This non-alloy steel is in coils, not further worked than cold-rolled and annealed, unclad and uncoated, meeting the tariff item's less-than-0.5 mm thickness criterion.
7209.18.00L Blackplate Coil for Lithium Battery Housings
An L-grade (low carbon) cold-rolled blackplate steel coil, under 0.361 mm thick and at least 600 mm wide, for battery cans in electronics. This non-alloy steel is cold-reduced, uncoated, and not further worked, meeting the blackplate definition of this tariff item.
7209.18.00MR Type Blackplate Steel Coil for General Tinplate Base
A Medium Rockwell (MR) grade cold-rolled blackplate steel coil, under 0.361 mm thick and 600 mm or wider, serving as base stock for tinplate production. This non-alloy steel is cold-reduced, uncoated, and not further worked, fitting the blackplate criteria of this tariff item.
7209.18.00T1-T5 Temper Blackplate Steel Coil for Food Cans
A T1 to T5 temper cold-rolled blackplate coil, under 0.361 mm in thickness and at least 600 mm wide, for three-piece welded food cans. This non-alloy steel is cold-reduced, uncoated, and not further worked, meeting the blackplate definition of this tariff item.
7209.18.00TRIP800 Ultra High-Strength Steel Coil for Crash Structures
Transformation-induced plasticity (TRIP800) steel cold-rolled coil, under 0.5 mm thick and over 600 mm wide, exceeding high-strength yield criteria. This non-alloy steel is flat-rolled, in coils, and not further worked than cold-rolling, making it suitable for crash structures. It is classified under tariff item 7209.18.00 as a flat-rolled product of iron or non-alloy steel, cold-rolled, not clad, plated or coated.