Of a thickness of less than 0.5 mm
Live horses, asses, mules and hinnies. > Of a thickness of less than 0.5 mm > Of a thickness of less than 0.5 mm
Duty Rate (from China)
Products classified under Tariff item 7209.18.00.00
0.2mm Ultra-Thin Annealed High-Strength Steel Coil
An ultra-thin 0.2 mm high-strength steel coil, cold-rolled and annealed, over 600 mm wide, for lightweight applications. This nonalloy steel is flat-rolled, in coils, and not further worked beyond cold-rolling and annealing, fitting tariff item 7209.18.00.
7209.18.000.42mm Annealed High-Strength Cold Steel Coil
A 0.42 mm high-strength steel coil, cold-rolled and annealed, 900 mm wide, for machinery enclosures and guards. This nonalloy steel is flat-rolled, in coils, and not further worked beyond cold-rolling and annealing, qualifying for tariff item 7209.18.00.
7209.18.000.45mm Annealed Cold-Reduced High-Strength Steel Coil
A 0.45 mm cold-reduced high-strength steel coil, annealed, over 600 mm wide, not clad or coated. This nonalloy steel is flat-rolled, in coils, and not further worked beyond cold-rolling and annealing, fitting tariff item 7209.18.00.
7209.18.00AHSS Cold-Reduced Steel Coil for Appliance Housings
A cold-reduced advanced high-strength steel coil, under 0.5 mm thick and over 600 mm wide, with a yield strength exceeding 275 MPa. This nonalloy steel is flat-rolled, in coils, and not further worked than cold-rolled, qualifying it for tariff item 7209.18.00.
7209.18.00Annealed High-Strength Steel Coil for Automotive 0.35mm
A 0.35 mm cold-rolled high-strength steel coil, annealed to reduce internal stresses for deep drawing, over 600 mm wide. This nonalloy steel is flat-rolled, in coils, and not further worked beyond cold-rolling and annealing, qualifying for tariff item 7209.18.00.
7209.18.00Automotive Grade Annealed High-Strength Steel 0.48mm Coil
A 0.48 mm cold-rolled annealed high-strength steel coil, 800 mm wide, for automotive structural parts. This nonalloy steel is flat-rolled, in coils, and not further worked beyond cold-rolling and annealing, fitting tariff item 7209.18.00.
7209.18.00Bake-Hardenable BH340 Steel Coil for Furniture Frames
A bake-hardenable BH340 steel coil, cold-rolled to under 0.5 mm thickness and over 600 mm width, with a yield strength qualifying as high-strength. This nonalloy steel is flat-rolled, in coils, and not further worked, fitting tariff item 7209.18.00.
7209.18.00Cold-Rolled HSLA Steel Coil for HVAC Ductwork
A cold-rolled HSLA steel coil, under 0.5 mm thick and at least 600 mm wide, with a yield point of 275 MPa or more. This nonalloy steel is flat-rolled, in coils, and not further worked, qualifying for tariff item 7209.18.00.
7209.18.00DP600 Annealed High-Strength Steel Coil 0.4mm
A DP600 dual-phase high-strength steel coil, cold-rolled to 0.4 mm, annealed, 650 mm wide. This nonalloy steel is flat-rolled, in coils, and not further worked beyond cold-rolling and annealing, qualifying for tariff item 7209.18.00.
7209.18.00DP600 High-Strength Steel Coil for Structural Components
A dual-phase DP600 high-strength steel coil, cold-rolled to under 0.5 mm thickness and over 600 mm width, with a minimum yield strength of 355 MPa. This nonalloy steel is flat-rolled, in coils, and not further worked, fitting tariff item 7209.18.00.
7209.18.00High-Strength Annealed Cold-Rolled Steel Coil 0.4mm
A 0.4 mm cold-rolled high-strength steel coil, annealed for improved formability, over 600 mm wide. This nonalloy steel is flat-rolled, in coils, and not further worked beyond cold-rolling and annealing, fitting tariff item 7209.18.00.
7209.18.00High-Strength Annealed Steel for Appliances 0.38mm Coil
A 0.38 mm cold-rolled high-strength steel coil, annealed for formability in appliance panels, over 600 mm wide. This nonalloy steel is flat-rolled, in coils, and not further worked beyond cold-rolling and annealing, qualifying for tariff item 7209.18.00.
7209.18.00High-Strength Cold-Rolled Steel Coil for Automotive Panels
A cold-rolled high-strength steel coil, under 0.5 mm thick and over 600 mm wide, meeting a minimum yield point of 275 MPa. This nonalloy steel is flat-rolled, in coils, and not further worked, qualifying for tariff item 7209.18.00.
7209.18.00IF High-Strength Steel Coil for Battery Enclosures
An interstitial-free (IF) high-strength steel coil, cold-rolled to under 0.5 mm thickness and at least 600 mm width, with a minimum yield of 275 MPa. This nonalloy steel is flat-rolled, in coils, and not further worked, fitting tariff item 7209.18.00.
7209.18.00TRIP800 Ultra High-Strength Steel Coil for Crash Structures
A TRIP800 ultra high-strength steel coil, cold-rolled to under 0.5 mm thickness and over 600 mm width, exceeding high-strength yield criteria. This nonalloy steel is flat-rolled, in coils, and not further worked, qualifying for tariff item 7209.18.00.