Of a thickness of less than 0.5 mm

7209.26.00Of a thickness exceeding 1 mm but less than 3 mm

7209.27.00Of a thickness of 0.5 mm or more but not exceeding 1 mm

7209.28.00Of a thickness of less than 0.5 mm

Calculate exact duty for your shipment Not sure about classification? Ask the Tariff Assistant

Products classified under Tariff item 7209.2

Cold-Rolled Annealed Steel Sheet 3.8mm

Cold-rolled annealed non-alloy steel sheet, 3.8 mm thick and 750 mm wide, supplied flat (not in coils). It is a flat-rolled product of iron or non-alloy steel, cold-reduced (cold-rolled) and not further worked than annealed, meeting the thickness and width criteria for this tariff item.

Cold-Rolled Automotive Press Steel 3.1mm

Cold-rolled press-hardening quality steel, 3.1 mm thick and at least 600 mm wide, flat (not in coils), intended for automotive panels. It is a flat-rolled non-alloy steel product that has been cold-reduced and not further worked, satisfying the thickness and width requirements of this tariff item.

Cold-Rolled Carbon Steel Plate 6mm Thick

Cold-rolled carbon steel plate, 6 mm thick and 1200 mm wide, supplied flat (not in coils). This flat-rolled product of non-alloy steel has been cold-reduced and not further worked, meeting the thickness (≥3 mm) and width (≥600 mm) criteria for this tariff item.

Cold-Rolled Commercial Quality Steel Sheet 3mm Thick

Commercial quality cold-rolled steel sheet, exactly 3 mm thick and 900 mm wide, flat (not coiled), without coatings. It is a flat-rolled non-alloy steel product that has been cold-reduced and not further worked, precisely matching the thickness and width parameters of this tariff item.

Cold-Rolled Construction Steel Sheet 6.2mm

Construction-grade cold-rolled steel sheet, 6.2 mm thick and 1400 mm wide, non-alloy, not in coils. This flat-rolled product has been cold-reduced and not further worked, meeting the thickness (≥3 mm) and width (≥600 mm) requirements of this tariff item.

Cold-Rolled Deep Drawing Steel Plate 3.2mm

Deep drawing quality cold-rolled non-alloy steel plate, 3.2 mm thick and 1100 mm wide, flat. It is a flat-rolled product that has been cold-reduced and not further worked (no cladding, coating, or additional processing), satisfying the thickness and width criteria for this tariff item.

Cold-Rolled Heavy Gauge Steel Plate 10mm

Heavy gauge cold-rolled non-alloy steel plate, 10 mm thick and 2000 mm wide, flat. This flat-rolled product has been cold-reduced and not further worked, meeting the thickness (≥3 mm) and width (≥600 mm) requirements of this tariff item.

Cold-Rolled Low Carbon Steel Sheet 4mm Thick

Cold-reduced low-carbon steel sheet, 4 mm thick and 1000 mm wide, not in coils, without cladding or coatings. It is a flat-rolled non-alloy steel product that has been cold-rolled and not further worked, meeting the thickness and width criteria of this tariff item.

Cold-Rolled Machinery Base Steel 4mm

Cold-rolled steel for machinery bases, 4 mm thick and 1000 mm wide, uncoated and flat. This flat-rolled non-alloy steel product has been cold-reduced and not further worked, satisfying the thickness (≥3 mm) and width (≥600 mm) requirements for this tariff item.

Cold-Rolled Mild Steel Blank 3.5mm Thick

Mild steel blanks cold-rolled to 3.5 mm thickness, 800 mm width, flat-packed (not in coils). These are flat-rolled non-alloy steel products that have been cold-reduced and not further worked, meeting the thickness and width criteria of this tariff item.

Cold-Rolled Nonalloy Steel Panel 5mm Thick

Flat cold-rolled panel of non-alloy steel, 5 mm thick and 1500 mm wide, not coiled or further worked. This flat-rolled product has been cold-reduced and not further worked, meeting the thickness (≥3 mm) and width (≥600 mm) requirements of this tariff item.

Cold-Rolled Pickling Steel Sheet 7mm Thick

Pickling quality cold-rolled sheet, non-alloy, 7 mm thick and 1800 mm wide, not in coils. This flat-rolled product has been cold-reduced and not further worked (pickling is considered part of the cold-rolling process), meeting the thickness and width criteria for this tariff item.

Cold-Rolled Shipbuilding Steel Plate 5.5mm

Shipbuilding grade cold-rolled plate, 5.5 mm thick and 1600 mm wide, flat non-alloy steel. This flat-rolled product has been cold-reduced and not further worked, meeting the thickness (≥3 mm) and width (≥600 mm) requirements of this tariff item.

Cold-Rolled Steel Slab Cut to Plate 4.5mm

Cut-to-size cold-rolled plates from non-alloy steel slab, 4.5 mm thick and 1500 mm wide, not in coils. These flat-rolled products have been cold-reduced and not further worked (cutting to size is acceptable as simple trimming), meeting the thickness and width criteria for this tariff item.

Cold-Rolled Structural Steel Plate 8mm Thick

Cold-rolled plate for structural use, non-alloy steel, 8 mm thick and 2000 mm wide, not in coils. This flat-rolled product has been cold-reduced and not further worked (no coating, cladding, or surface treatment), meeting the thickness (≥3 mm) and width (≥600 mm) requirements of this tariff item.

Cold-Rolled Commercial Quality Steel 2.8mm

Cold-rolled non-alloy steel sheet, 2.8 mm thick and 1,100 mm wide, supplied flat in sheets. It is not clad, plated, or coated and has not been further worked beyond cold rolling, meeting the definition of flat-rolled products of heading 72.09.

Cold-Rolled Drawing Steel Sheet 1.2mm

Deep drawing quality cold-rolled non-alloy steel sheet, 1.2 mm thick and 1,250 mm wide, in flat sheet form. The product is not clad, plated, or coated and has not been further worked, fitting the scope of heading 72.09.

Cold-Rolled Mild Steel Panel 1.8mm

Low-carbon mild steel cold-rolled panels, 1.8 mm thick and 1,500 mm wide, supplied flat in sheets for fabrication. The panels are non-alloy, uncoated, and not further worked, aligning with the flat-rolled products of heading 72.09.

Cold-Rolled Nonalloy Steel Sheet 1.5mm Thick

Flat-rolled non-alloy steel sheet, cold-rolled, 1.5 mm thick and 1,200 mm wide, supplied in rectangular sheets not in coils. It is not clad, plated, or coated and has not been further worked, meeting the criteria for heading 72.09.

Cold-Rolled Structural Steel Sheet 2.2mm

SS400 grade cold-rolled non-alloy steel sheet for structural use, 2.2 mm thick and 1,800 mm wide, in flat sheets. The product is cold-reduced, uncoated, and not further worked, fitting the definition of flat-rolled products in heading 72.09.

HRPO Cold-Rolled Steel Sheet 2mm

Hot-rolled pickled and oiled (HRPO) cold-reduced non-alloy steel sheet, 2 mm thick and 1,000 mm wide, in cut-to-length sheets. Pickling and oiling do not constitute further working, so the product remains classified as cold-rolled flat-rolled steel of heading 72.09.

Pickled Cold-Rolled Steel Blank 1.6mm

Pickled cold-rolled non-alloy steel blanks, 1.6 mm thick and 750 mm wide, cut to size in sheets. Pickling is a pre-cold-rolling treatment and does not constitute further working, so the blanks fit the scope of heading 72.09.

SPHC Cold-Rolled Steel Sheet 2.5mm

SPHC grade commercial quality cold-rolled non-alloy steel sheet, 2.5 mm thick and 900 mm wide, in discrete sheets. The product is cold-reduced, uncoated, and not further worked, meeting the requirements for flat-rolled products of heading 72.09.

0.65mm Gauge Cold-Rolled Steel for Fabrication

Cold-rolled non-alloy steel sheets, 0.65 mm thick and over 600 mm wide, supplied flat (not in coils). Uncoated and not further worked beyond cold-rolling, these sheets are used for general fabrication and stamping.

0.6mm Cold-Reduced Steel Panel Blank

Rectangular cold-reduced non-alloy steel sheets, 0.6 mm thick and over 600 mm wide, used as blanks for appliance panels. Not in coils, unclad, unplated, and only cold-rolled.

0.9mm Thick Cold-Rolled Steel Base Stock

Non-alloy steel base stock cold-rolled to 0.9 mm, supplied as sheets over 600 mm wide, not in coil form or further processed. Suitable for subsequent fabrication.

Cold-Reduced Low Carbon Steel Sheet 0.5mm

Low-carbon non-alloy steel cold-reduced to 0.5 mm thickness, supplied as wide sheets over 600 mm. Not coiled, not plated or clad, matching the thickness band and processing limits.

Cold-Rolled Mild Steel Sheet 0.75mm

Mild steel sheets cold-rolled to 0.75 mm thickness, width exceeding 600 mm, cut to size and not coiled. Free of cladding, plating, or additional treatments beyond cold-reduction.

Cold-Rolled Nonalloy Steel Sheet 0.8mm Thick

Flat-rolled non-alloy steel, cold-rolled to 0.8 mm thickness and over 600 mm wide, supplied in rectangular sheets not in coils. Not clad, plated, or coated, and not further worked beyond cold-rolling.

Precision Cold-Rolled Steel Sheet 1mm Max

High-precision cold-rolled non-alloy steel sheets up to 1 mm thick, wider than 600 mm, not coiled or treated further. Meets the specified gauge range for cold-reduced flat products.

0.2mm Ultra-Thin Cold-Rolled Steel Sheet

Ultra-thin flat-rolled non-alloy steel sheet, cold-rolled to a thickness of 0.2 mm and a width of 1000 mm, supplied in flat sheets rather than coils. This product falls under tariff item 7209.28.00 as it is a flat-rolled product of iron or non-alloy steel, cold-rolled, not clad, plated or coated, and of a thickness less than 0.5 mm.

0.35mm Cold-Rolled Annealed Steel Sheet

Annealed cold-rolled non-alloy steel sheet, 0.35 mm thick and 750 mm wide, supplied flat and not in coils, with no surface treatments beyond rolling. Annealing is a heat treatment that does not constitute further working, so the product remains a flat-rolled product of iron or non-alloy steel, cold-rolled, not clad, plated or coated, and of a thickness less than 0.5 mm, classifiable under tariff item 7209.28.00.

0.3mm Thick Cold-Reduced Steel Panel

Cold-reduced flat-rolled iron or non-alloy steel panel measuring 0.3 mm in thickness and over 700 mm in width, not in coil form and without additional processing. This product is a flat-rolled product of iron or non-alloy steel, cold-rolled, not clad, plated or coated, and of a thickness less than 0.5 mm, fitting tariff item 7209.28.00.

0.48mm Cold-Reduced Mild Steel Sheet

Mild steel sheets cold-reduced to a thickness of 0.48 mm and a width of 900 mm, supplied in flat form, not coiled or further worked. This product is a flat-rolled product of non-alloy steel, cold-rolled, not clad, plated or coated, and of a thickness less than 0.5 mm, classifiable under tariff item 7209.28.00.

Cold-Rolled Non-Alloy Steel for Automotive Trim

Cold-rolled non-alloy steel sheets of 0.35 mm thickness and 650 mm width, supplied flat and not in coils, intended for automotive interior trim blanks. The product is a flat-rolled product of iron or non-alloy steel, cold-rolled, not clad, plated or coated, and of a thickness less than 0.5 mm, falling under tariff item 7209.28.00.

Cold-Rolled Non-Alloy Steel Sheet 0.4mm Thick

Flat-rolled non-alloy steel sheet, cold-rolled to a thickness of 0.4 mm and width exceeding 600 mm, supplied flat and not in coils. This product is a flat-rolled product of iron or non-alloy steel, cold-rolled, not clad, plated or coated, and of a thickness less than 0.5 mm, classifiable under tariff item 7209.28.00.

Cold-Rolled Steel Blank 0.45mm for Appliances

Rectangular cold-rolled non-alloy steel blanks at 0.45 mm thickness, width 800 mm or more, supplied flat and not coiled, used in appliance manufacturing. This product is a flat-rolled product of iron or non-alloy steel, cold-rolled, not clad, plated or coated, and of a thickness less than 0.5 mm, fitting tariff item 7209.28.00.

Flat Cold-Rolled Low Carbon Steel Sheet 0.4mm

Low carbon non-alloy steel cold-rolled to 0.4 mm thickness and 1200 mm width, supplied in sheets, not coiled, and untreated. This product is a flat-rolled product of iron or non-alloy steel, cold-rolled, not clad, plated or coated, and of a thickness less than 0.5 mm, classifiable under tariff item 7209.28.00.