0.2mm Ultra-Thin Cold-Rolled Steel Sheet
Ultra-thin flat-rolled non-alloy steel sheet, cold-rolled to a thickness of 0.2 mm and a width of 1000 mm, supplied in flat sheets rather than coils. It has not been clad, plated, or coated, and has undergone no further working beyond cold-rolling, meeting the specifications of tariff item 7209.28.00.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | +50.0% | 50% |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the sheets are supplied in coils
Tariff item 7209.15.00 covers cold-rolled non-alloy steel in coils, not further worked, of a thickness less than 0.5 mm.
If the width is less than 600 mm
Narrower cold-rolled non-alloy steel products fall under heading 7211, which covers flat-rolled products of a width less than 600 mm.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Ensure the steel is non-alloy and confirm the thickness (0.2 mm) and width (≥600 mm) are accurately declared on the commercial invoice
• Provide a mill test certificate to verify composition and dimensions, as CBSA may request it
• Verify whether a preferential tariff treatment (e.g
• CUSMA) applies to reduce or eliminate duty
Related Products under Tariff item 7209.28.00
0.35mm Cold-Rolled Annealed Steel Sheet
Annealed cold-rolled non-alloy steel sheet, 0.35 mm thick and 750 mm wide, supplied flat and not in coils. Annealing is a heat treatment that does not constitute further working for classification purposes, so the product remains within the scope of tariff item 7209.28.00.
0.3mm Thick Cold-Reduced Steel Panel
Cold-reduced flat-rolled iron or non-alloy steel panel, 0.3 mm thick and over 700 mm wide, not in coil form and without additional processing such as cladding, plating, or coating. It has been cold-reduced only, aligning with the description of tariff item 7209.28.00.
0.48mm Cold-Reduced Mild Steel Sheet
Mild steel sheets cold-reduced to a thickness of 0.48 mm, with a width of 900 mm, supplied in flat form and not coiled or further worked. The product is non-alloy and has not been clad, plated, or coated, matching the criteria for tariff item 7209.28.00.
Cold-Rolled Non-Alloy Steel for Automotive Trim
Cold-rolled steel sheets of 0.35 mm thickness and 650 mm width, supplied flat and not in coils, intended for automotive interior trim blanks. The product is non-alloy and has no cladding, plating, or coating, so it falls under tariff item 7209.28.00 despite its end-use application.
Cold-Rolled Non-Alloy Steel Sheet 0.4mm Thick
Flat-rolled non-alloy steel sheet, cold-rolled to a thickness of 0.4 mm and a width exceeding 600 mm, supplied flat and not in coils. It has not been further worked beyond cold-rolling and is not clad, plated, or coated, fitting tariff item 7209.28.00.
Cold-Rolled Steel Blank 0.45mm for Appliances
Rectangular cold-rolled non-alloy steel blanks at 0.45 mm thickness, width 800 mm or more, supplied flat and not coiled, used in appliance manufacturing. The blanks are not further worked beyond cold-rolling and have no plating, coating, or cladding, so they fall under tariff item 7209.28.00.