Clad Aluminum Heat Exchanger Plate
4 mm thick clad plate of aluminum not alloyed, with brazing cladding for HVAC heat exchangers. HTS 7606.91.60.95 applies to its flat plate/sheet format, non-alloyed base exceeding 99% purity, and thickness specification.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If without cladding layer
Absence of cladding moves to rectangular unclad non-alloyed plates under 7606.11.60.
If assembled into complete heat exchanger unit
Machinery parts like finished heat exchangers classify under Chapter 84, not raw sheets.
If thickness exceeds 6.3 mm
Thicker clad sheets (>6.3 mm) fall into the separate thickness subheading.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Submit chemical analysis reports confirming non-alloyed status per subheading note (a) limits on Fe, Si, etc
• Label shipments clearly as 'semi-finished clad sheet' to avoid classification as finished heat exchanger parts
• Check for anti-dumping duties on specific aluminum sheet originating from certain countries
Related Products under HTS 7606.91.60.95
Clad Aluminum Sheet for Aerospace Panels
A high-purity, non-alloyed aluminum sheet clad with a thin protective layer, measuring 5 mm thick, used in aircraft fuselage panels. It falls under HTS 7606.91.60.95 due to its clad construction, aluminum content over 99%, thickness between 0.2 mm and 6.3 mm, and plate/sheet form exceeding 0.2 mm.
Clad Aluminum Cookware Base Sheet
Non-alloyed aluminum sheet, 4.5 mm thick, clad on one side for corrosion resistance in cookware bottoms. Classified under HTS 7606.91.60.95 for its rectangular sheet form, thickness over 0.2 mm up to 6.3 mm, and clad non-alloyed aluminum composition.
Clad Aluminum Roofing Sheet
Non-alloyed aluminum sheet clad for weather resistance, 3.8 mm thick, cut to standard sizes for roofing applications. It matches HTS 7606.91.60.95 as a clad plate/sheet over 0.2 mm thick, ≤6.3 mm, with purity meeting non-alloyed criteria.
Clad Aluminum Trailer Side Panel Sheet
5.2 mm thick non-alloyed aluminum sheet with cladding for corrosion protection in truck trailer sides. Classified in HTS 7606.91.60.95 for clad, non-alloyed plates/sheets with thickness 0.2-6.3 mm.
Clad Aluminum Chemical Tank Liner Sheet
Pure aluminum sheet, 6 mm thick, clad internally for acid resistance in chemical storage tanks. HTS 7606.91.60.95 covers its non-alloyed clad plate form within the specified thickness range.
Clad Aluminum Marine Hull Plate
4.8 mm clad non-alloyed aluminum plate for boat hulls, providing sacrificial corrosion protection. Fits HTS 7606.91.60.95 as a thickness-compliant clad sheet of high-purity aluminum.