Clad Aluminum Cookware Base Sheet
Non-alloyed aluminum sheet, 4.5 mm thick, clad on one side for corrosion resistance in cookware bottoms. Classified under HTS 7606.91.60.95 for its rectangular sheet form, thickness over 0.2 mm up to 6.3 mm, and clad non-alloyed aluminum composition.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If alloyed aluminum is used in the core or cladding
Any alloy content exceeding note (a) limits classifies the entire sheet as alloyed under 7606.12.
If rolled into strip form under 600 mm width
Strip classification applies to narrower, continuously rolled products vs broader sheets.
If further fabricated into finished cookware components
Completed table/kitchen articles like pot bottoms enter under 7615.19 for household aluminum goods.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Include detailed layer composition (core vs cladding) in commercial invoice to substantiate clad classification
• Test for food-contact safety compliance (e.g
• FDA standards) even if not final product, to prevent CBP holds
• Declare exact thickness gauge to differentiate from thinner foil or strip products
Related Products under HTS 7606.91.60.95
Clad Aluminum Sheet for Aerospace Panels
A high-purity, non-alloyed aluminum sheet clad with a thin protective layer, measuring 5 mm thick, used in aircraft fuselage panels. It falls under HTS 7606.91.60.95 due to its clad construction, aluminum content over 99%, thickness between 0.2 mm and 6.3 mm, and plate/sheet form exceeding 0.2 mm.
Clad Aluminum Heat Exchanger Plate
4 mm thick clad plate of aluminum not alloyed, with brazing cladding for HVAC heat exchangers. HTS 7606.91.60.95 applies to its flat plate/sheet format, non-alloyed base exceeding 99% purity, and thickness specification.
Clad Aluminum Roofing Sheet
Non-alloyed aluminum sheet clad for weather resistance, 3.8 mm thick, cut to standard sizes for roofing applications. It matches HTS 7606.91.60.95 as a clad plate/sheet over 0.2 mm thick, ≤6.3 mm, with purity meeting non-alloyed criteria.
Clad Aluminum Trailer Side Panel Sheet
5.2 mm thick non-alloyed aluminum sheet with cladding for corrosion protection in truck trailer sides. Classified in HTS 7606.91.60.95 for clad, non-alloyed plates/sheets with thickness 0.2-6.3 mm.
Clad Aluminum Chemical Tank Liner Sheet
Pure aluminum sheet, 6 mm thick, clad internally for acid resistance in chemical storage tanks. HTS 7606.91.60.95 covers its non-alloyed clad plate form within the specified thickness range.
Clad Aluminum Marine Hull Plate
4.8 mm clad non-alloyed aluminum plate for boat hulls, providing sacrificial corrosion protection. Fits HTS 7606.91.60.95 as a thickness-compliant clad sheet of high-purity aluminum.