2-Layer PCB Copper Clad Laminate Panel
Standard panel-sized (18x24 inch) double-sided copper clad laminate for 2-layer PCB production, featuring 1.6mm FR-4 glass epoxy core with 1oz refined copper on both sides. Essential raw material for electronic assembly. HTS 7410.21.3040 due to double copper cladding on qualifying base material.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If using copper-nickel base alloys
Nickel silver alloys per note (c) classify under copper alloy foil subheading.
If paper-backed rather than plastics-impregnated glass
Paper-based copper clad materials fall under kraft paper products in paper chapter.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Declare panel yield/usable area accurately—customs may inspect for defects affecting value
• Copper thickness uniformity certificates prevent disputes over 'not exceeding 0.15mm' requirement
• Use HTSUS advisory rulings for large-volume imports to lock in classification
Related Products under HTS 7410.21.30.40
FR-4 Copper Clad Laminate Double-Sided
Double-sided copper clad laminate made with FR-4 epoxy resin impregnated glass fiber base, featuring refined copper foil on both sides with thickness not exceeding 0.15 mm. Used primarily as the foundational material for manufacturing multilayer printed circuit boards (PCBs). Falls under HTS 7410.21.3040 due to its plastic-impregnated glass base and copper cladding on both sides.
1.6mm Double-Sided FR4 Copper Clad Laminate
Standard 1.6mm thick double-sided copper clad laminate with FR-4 glass epoxy substrate and 1 oz refined copper foil on both sides (foil thickness 0.035mm <0.15mm). Widely used for prototyping and production PCBs in telecommunications equipment. HTS 7410.21.3040 applies due to plastics-impregnated glass base with copper on both surfaces.
High Tg FR4 Double-Sided Copper Clad Sheet
High glass transition temperature (Tg 170°C+) FR4 double-sided copper clad laminate with refined copper foil on plastics-impregnated glass cloth base, foil thickness not exceeding 0.15mm. Designed for lead-free soldering and high-reliability automotive electronics PCBs. Meets HTS 7410.21.3040 criteria for double-sided copper clad glass-epoxy laminates.
Rogers 4003C Double-Sided Copper Laminate
Rogers 4003C high-frequency double-sided copper clad laminate featuring ceramic-filled plastics-impregnated glass reinforcement with refined copper foil on both sides (≤0.15mm thick). Used in RF/microwave PCBs for wireless communications. Classifies under HTS 7410.21.3040 as copper clad laminate with plastics-impregnated glass base.
Halogen-Free FR4 Double Copper Clad Laminate
Eco-friendly halogen-free FR4 double-sided copper clad laminate with flame-retardant plastics-impregnated glass fabric and refined copper foil both sides (thickness <0.15mm). Meets RoHS requirements for consumer electronics PCBs. Fits HTS 7410.21.3040 specifications perfectly.
Polyimide Glass Double-Sided Copper Clad
High-temperature polyimide resin with glass fabric double-sided copper clad laminate, refined copper foil ≤0.15mm thick on both sides. Used in aerospace and military PCBs requiring 260°C+ performance. HTS 7410.21.3040 classification for plastics-impregnated glass with double copper.