Containing 8 percent or more but less than 24 percent by weight of nickel
Other bars and rods of stainless steel; angles, shapes and sections of stainless steel: > Other bars and rods > Other: > With a maximum cross-sectional dimension of less than 152.4 mm: > Containing 8 percent or more but less than 24 percent by weight of nickel
Duty Rate (from China)
Except for products described in headings 9903.03.02–9903.03.11, articles the product of any country, as provided for in subdivision (aa) of U.S. note 2 to this subchapter
Effective with respect to entries on or after September 27, 2024, articles the product of China, as provided for in subdivision (b) of U.S. note 31 to this subchapter
Products classified under HTS 7222.30.00.24
Custom 8-12% Nickel Stainless Square Rod
Hot-rolled square stainless rod engineered with 10% average nickel, 28mm x 28mm. Directly matches HTS 7222.30.00.24 parameters for other bars/rods stainless 8-<24% Ni <152.4mm. General fabrication stock.
Martensitic 8% Nickel Stainless Flat Strip
Martensitic precipitation stainless flat 'bar' 8% Ni, 5mm x 50mm cross-section. HTS 7222.30.00.24 as other stainless bars (non-angles) 8-<24% Ni <152.4mm. Knife blade stock.
AISI 321 Stainless Steel Round Bar
A round bar made from AISI 321 austenitic stainless steel containing approximately 10-12% nickel by weight, with a diameter of 25 mm (under 152.4 mm cross-section). This falls under HTS 7222.30.00.24 as other bars and rods of stainless steel with 8-24% nickel content and max cross-sectional dimension less than 152.4 mm. Commonly used in high-temperature exhaust systems due to its stabilized composition.
17-4 PH Stainless Steel Flat Bar
Precipitation-hardening 17-4 PH stainless steel flat bar with 10-13% nickel, 15mm thick x 100mm wide (max cross-section <152.4 mm). Classified under HTS 7222.30.00.24 for stainless steel bars with 8-24% nickel in 'other bars and rods' category. Ideal for aerospace structural components requiring high strength.
AISI 347 Stainless Steel Hexagonal Rod
Hexagonal rod of AISI 347 stainless steel with 9-13% nickel content, 40mm across flats (<152.4 mm cross-section). Fits HTS 7222.30.00.24 as other stainless steel rods/bars with moderate nickel alloying. Used in chemical processing equipment for corrosion resistance.
Duplex 2205 Stainless Steel Square Bar
Super duplex stainless square bar (modified S32750 variant with 8-12% nickel), 25mm square cross-section. HTS 7222.30.00.24 for stainless bars 8-<24% Ni, max dim <152.4mm. High strength for offshore oil platforms.
Nitronic 50 Stainless Steel Round Rod
Nitronic 50 (XM-19) austenitic stainless round rod with 11-14% nickel, diameter 35mm. Classifies to HTS 7222.30.00.24 as other stainless rods 8-<24% Ni, <152.4mm section. Used for valve stems in marine environments.
Custom 316LMod Stainless Hex Bar 10% Nickel
Modified 316L stainless hex bar with boosted 10% nickel for weldability, 20mm across flats. HTS 7222.30.00.24 for 8-24% Ni stainless bars/rods <152.4mm. For pharmaceutical fittings.
AISI 310S Stainless Flat Bar
AISI 310S heat-resistant stainless flat bar with 19-22% nickel content, 10mm x 80mm section. Perfect fit for HTS 7222.30.00.24 (8-<24% Ni stainless bars <152.4mm). Furnace parts applications.
Alloy 20Cb-3 Stainless Round Bar
Alloy 20 formulation adjusted to 18% nickel stainless round bar, 40mm diameter (<152.4mm). Classed HTS 7222.30.00.24 for moderate nickel stainless rods. Superior corrosion resistance.