Hot-Rolled 17-4 PH Precipitation Hardening Stainless 3.5mm x 390mm
17-4 PH martensitic precipitation hardening stainless steel sheet hot-rolled, 3.5 mm thick x 390 mm wide, condition A (annealed), no further working. HTS 7220.12.10.00: stainless flat-rolled product, thickness <4.75 mm, width 300+ mm.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If alloy >10.5% Cr and further worked
Certain high-chromium alloys meeting tool steel note e may go to 7228 if processed further.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Specify PH grade composition (17% Cr, 4% Ni); declare heat treatment status; avoid confusion with tool steel notes
Related Products under HTS 7220.12.10.00
Hot-Rolled 321 Stabilized Stainless Sheet 2.8mm x 480mm Wide
Titanium-stabilized 321 stainless steel hot-rolled to 2.8 mm thickness and 480 mm width, not further worked. Falls under HTS 7220.12.10.00 for stainless flat-rolled <4.75 mm, >=300 mm wide, hot-rolled surface.
Hot-Rolled 304 Stainless Steel Sheet 1.5mm Thick 400mm Wide
This is a flat-rolled stainless steel sheet made from grade 304 alloy, hot-rolled to a thickness of 1.5 mm and width of 400 mm, not further worked beyond hot-rolling. It falls under HTS 7220.12.10.00 because it is stainless steel, less than 4.75 mm thick, between 300 mm and 600 mm wide, and not subjected to polishing, coating, or other further working as defined in chapter notes.
Hot-Rolled 430 Stainless Steel Coil 3mm Thick 350mm Wide
A coil of hot-rolled 430 ferritic stainless steel, 3 mm thick and 350 mm wide, supplied in annealed pickling condition without additional processing. Classified under HTS 7220.12.10.00 due to stainless steel composition, thickness under 4.75 mm, width 300 mm or more but less than 600 mm, and no further working like coating or burnishing.
Hot-Rolled 316L Stainless Steel Plate 2.5mm x 500mm Wide
Hot-rolled plate of 316L molybdenum-bearing stainless steel, measuring 2.5 mm in thickness and 500 mm width, not in coils and free of patterns or additional treatments. It matches HTS 7220.12.10.00 for stainless flat-rolled products hot-rolled only, under 4.75 mm thick, and 300 mm or wider but under 600 mm.
Annealed Hot-Rolled 201 Stainless Steel Sheet 1.2mm Thick 320mm
Lean duplex 201 stainless steel sheet hot-rolled to 1.2 mm thickness and 320 mm width, annealed but not further worked. Fits HTS 7220.12.10.00 as stainless steel flat-rolled product under 4.75 mm thick, 300+ mm wide, without polishing or chemical treatments.
Hot-Rolled Duplex 2205 Stainless Steel 3.8mm x 450mm Wide
Duplex 2205 stainless steel flat-rolled product hot-rolled to 3.8 mm thick and 450 mm wide, not further worked. Classified in HTS 7220.12.10.00 for its stainless alloy, thickness <4.75 mm, width 300-600 mm, and hot-rolled surface condition.