Hot-Rolled 430 Stainless Steel Coil 3mm Thick 350mm Wide
A coil of hot-rolled 430 ferritic stainless steel, 3 mm thick and 350 mm wide, supplied in annealed pickling condition without additional processing. Classified under HTS 7220.12.10.00 due to stainless steel composition, thickness under 4.75 mm, width 300 mm or more but less than 600 mm, and no further working like coating or burnishing.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If low chromium content
Non-stainless or low-alloy steels go to 7219.12, as true stainless requires minimum chromium per HTS definitions.
If further worked like coated
Coating with plastics or metal constitutes 'further worked' per chapter notes, shifting to 7220.90 for clad or coated products.
If width less than 300 mm
Narrower widths (<300 mm) fall into separate subheading even if same thickness and processing.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Include chemical analysis report confirming 430 stainless (16-18% Cr); ensure no rust or discoloration claims as chapter notes disallow duty reductions; declare as coil vs sheet if slit from master coil
Related Products under HTS 7220.12.10.00
Hot-Rolled 321 Stabilized Stainless Sheet 2.8mm x 480mm Wide
Titanium-stabilized 321 stainless steel hot-rolled to 2.8 mm thickness and 480 mm width, not further worked. Falls under HTS 7220.12.10.00 for stainless flat-rolled <4.75 mm, >=300 mm wide, hot-rolled surface.
Hot-Rolled 304 Stainless Steel Sheet 1.5mm Thick 400mm Wide
This is a flat-rolled stainless steel sheet made from grade 304 alloy, hot-rolled to a thickness of 1.5 mm and width of 400 mm, not further worked beyond hot-rolling. It falls under HTS 7220.12.10.00 because it is stainless steel, less than 4.75 mm thick, between 300 mm and 600 mm wide, and not subjected to polishing, coating, or other further working as defined in chapter notes.
Hot-Rolled 316L Stainless Steel Plate 2.5mm x 500mm Wide
Hot-rolled plate of 316L molybdenum-bearing stainless steel, measuring 2.5 mm in thickness and 500 mm width, not in coils and free of patterns or additional treatments. It matches HTS 7220.12.10.00 for stainless flat-rolled products hot-rolled only, under 4.75 mm thick, and 300 mm or wider but under 600 mm.
Annealed Hot-Rolled 201 Stainless Steel Sheet 1.2mm Thick 320mm
Lean duplex 201 stainless steel sheet hot-rolled to 1.2 mm thickness and 320 mm width, annealed but not further worked. Fits HTS 7220.12.10.00 as stainless steel flat-rolled product under 4.75 mm thick, 300+ mm wide, without polishing or chemical treatments.
Hot-Rolled Duplex 2205 Stainless Steel 3.8mm x 450mm Wide
Duplex 2205 stainless steel flat-rolled product hot-rolled to 3.8 mm thick and 450 mm wide, not further worked. Classified in HTS 7220.12.10.00 for its stainless alloy, thickness <4.75 mm, width 300-600 mm, and hot-rolled surface condition.
Hot-Rolled 409 Stainless Steel for Exhaust Systems 2mm x 380mm
Ferritic 409 stainless steel sheet hot-rolled to 2 mm thickness and 380 mm width, used in automotive exhausts, without further treatments. Under HTS 7220.12.10.00 as stainless flat-rolled <4.75 mm thick, >=300 mm wide, hot-rolled only.