Hot-Rolled 304 Stainless Steel Sheet 1.5mm Thick 400mm Wide
This is a flat-rolled stainless steel sheet made from grade 304 alloy, hot-rolled to a thickness of 1.5 mm and width of 400 mm, not further worked beyond hot-rolling. It falls under HTS 7220.12.10.00 because it is stainless steel, less than 4.75 mm thick, between 300 mm and 600 mm wide, and not subjected to polishing, coating, or other further working as defined in chapter notes.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If not stainless steel alloy
Flat-rolled carbon steel products of similar dimensions fall under chapter 72 heading 7219, as stainless requires specific chromium-nickel alloy per chapter notes.
If thickness 4.75 mm or more
Thicker hot-rolled stainless steel sheets (>=4.75 mm) shift to the subheading for greater thickness within the same not-further-worked category.
If cold-rolled or polished
Any further working like polishing or cold-rolling moves it to 7220.22, as chapter notes define 'further worked' to include surface treatments beyond hot-rolling.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Certify exact thickness and width measurements to confirm <4.75mm and 300-600mm range; provide mill test certificate verifying stainless steel composition and hot-rolled only status; watch for accidental classification as cold-rolled if any polishing occurred
Related Products under HTS 7220.12.10.00
Hot-Rolled 321 Stabilized Stainless Sheet 2.8mm x 480mm Wide
Titanium-stabilized 321 stainless steel hot-rolled to 2.8 mm thickness and 480 mm width, not further worked. Falls under HTS 7220.12.10.00 for stainless flat-rolled <4.75 mm, >=300 mm wide, hot-rolled surface.
Hot-Rolled 430 Stainless Steel Coil 3mm Thick 350mm Wide
A coil of hot-rolled 430 ferritic stainless steel, 3 mm thick and 350 mm wide, supplied in annealed pickling condition without additional processing. Classified under HTS 7220.12.10.00 due to stainless steel composition, thickness under 4.75 mm, width 300 mm or more but less than 600 mm, and no further working like coating or burnishing.
Hot-Rolled 316L Stainless Steel Plate 2.5mm x 500mm Wide
Hot-rolled plate of 316L molybdenum-bearing stainless steel, measuring 2.5 mm in thickness and 500 mm width, not in coils and free of patterns or additional treatments. It matches HTS 7220.12.10.00 for stainless flat-rolled products hot-rolled only, under 4.75 mm thick, and 300 mm or wider but under 600 mm.
Annealed Hot-Rolled 201 Stainless Steel Sheet 1.2mm Thick 320mm
Lean duplex 201 stainless steel sheet hot-rolled to 1.2 mm thickness and 320 mm width, annealed but not further worked. Fits HTS 7220.12.10.00 as stainless steel flat-rolled product under 4.75 mm thick, 300+ mm wide, without polishing or chemical treatments.
Hot-Rolled Duplex 2205 Stainless Steel 3.8mm x 450mm Wide
Duplex 2205 stainless steel flat-rolled product hot-rolled to 3.8 mm thick and 450 mm wide, not further worked. Classified in HTS 7220.12.10.00 for its stainless alloy, thickness <4.75 mm, width 300-600 mm, and hot-rolled surface condition.
Hot-Rolled 409 Stainless Steel for Exhaust Systems 2mm x 380mm
Ferritic 409 stainless steel sheet hot-rolled to 2 mm thickness and 380 mm width, used in automotive exhausts, without further treatments. Under HTS 7220.12.10.00 as stainless flat-rolled <4.75 mm thick, >=300 mm wide, hot-rolled only.