AISI 904L Super Austenitic Stainless Plate
904L super austenitic stainless plate, 23-28% Ni, 19-23% Cr, 4-5% Mo, 10 mm thick x 2000 mm wide. Corrosion resistant for pharma. Fits 7219.90.0025 criteria.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If electroslag remelted
Specialty ESR process for flat-rolled stainless has dedicated heading.
If made into pipe fittings
Further worked into fittings classifies as Chapter 73 stainless articles.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• High Mo/Ni certs distinguish from standard 316—same duty but pricing premium
• Quaternary alloys still stainless if Cr ≥10.5% per note (e)
Related Products under HTS 7219.90.00.25
AISI 304 Stainless Steel Sheet 2B Finish
Flat-rolled stainless steel sheet conforming to AISI 304 grade, containing approximately 8-10.5% nickel and 18-20% chromium, with a 2B cold-rolled finish. Width exceeds 600 mm, typically 1.5 mm thick, not further worked beyond basic rolling and annealing. Classifies under 7219.90.0025 due to nickel content over 0.5%, width over 600 mm, and exclusion from other specific subheadings.
AISI 316L Stainless Steel Plate No.1 Finish
Hot-rolled stainless steel plate AISI 316L grade with 10-14% nickel, 16-18% chromium, and low carbon, featuring No.1 finish (scale not fully removed). Thickness 6 mm, width 1500 mm, used in chemical processing. Fits 7219.90.0025 as flat-rolled stainless steel >600 mm wide, >0.5% Ni, not in prior 'other' subheadings.
Duplex 2205 Stainless Steel Sheet Annealed
Duplex 2205 (UNS S32205) stainless steel sheet with ~5.5-6.5% nickel, 22% chromium, 3% molybdenum, annealed condition, 3 mm thick x 1250 mm wide. High strength for marine applications. Under 7219.90.0025 for stainless flat-rolled >600 mm, >0.5% Ni, not tool/heat-resisting per chapter notes.
Nitronic 60 Stainless Steel Strip Coil
Nitronic 60 (UNS S21800) high-manganese austenitic stainless strip in coil form, 8% nickel, 17% Cr, 1 mm thick x 800 mm wide. Used for wear-resistant parts. Classifies 7219.90.0025 as other flat-rolled stainless >600 mm, >0.5% Ni.
AISI 321 Stainless Steel Sheet Bright Annealed
Stabilized AISI 321 stainless sheet with 9-12% nickel, 17-19% Cr, titanium-stabilized, bright annealed finish, 2 mm x 1200 mm. For welded fabrications. 7219.90.0025 as other stainless flat-rolled >600 mm wide.
AISI 310 Stainless Steel Hot Band
AISI 310 high-temperature stainless hot band (not pickled), 20-22% Ni, 24-26% Cr, 4 mm thick x 1500 mm wide coil. For furnace parts. Under 7219.90.0025 as Ni>0.5% flat-rolled stainless.