AISI 310 Stainless Steel Hot Band
AISI 310 high-temperature stainless hot band (not pickled), 20-22% Ni, 24-26% Cr, 4 mm thick x 1500 mm wide coil. For furnace parts. Under 7219.90.0025 as Ni>0.5% flat-rolled stainless.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If ball-bearing steel per note (h)
Specific alloy composition for bearings precedes general 'other' subheading.
If width <600 mm, electrical quality
Narrower electrical stainless sheets have dedicated Chapter 72 heading 7225.
If semi-finished slab, not flat-rolled
Thicker than 4.75 mm or rectangular cross-section classifies as semi-finished in 7208.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Hot band scale/rust—no duty allowance per chapter note; clean post-entry
• High Ni/Cr verified via spectrometry certs for audit-proofing
• Distinguish from universal mill plate (note b)—310 typically exceeds width limits
Related Products under HTS 7219.90.00.25
AISI 304 Stainless Steel Sheet 2B Finish
Flat-rolled stainless steel sheet conforming to AISI 304 grade, containing approximately 8-10.5% nickel and 18-20% chromium, with a 2B cold-rolled finish. Width exceeds 600 mm, typically 1.5 mm thick, not further worked beyond basic rolling and annealing. Classifies under 7219.90.0025 due to nickel content over 0.5%, width over 600 mm, and exclusion from other specific subheadings.
AISI 316L Stainless Steel Plate No.1 Finish
Hot-rolled stainless steel plate AISI 316L grade with 10-14% nickel, 16-18% chromium, and low carbon, featuring No.1 finish (scale not fully removed). Thickness 6 mm, width 1500 mm, used in chemical processing. Fits 7219.90.0025 as flat-rolled stainless steel >600 mm wide, >0.5% Ni, not in prior 'other' subheadings.
Duplex 2205 Stainless Steel Sheet Annealed
Duplex 2205 (UNS S32205) stainless steel sheet with ~5.5-6.5% nickel, 22% chromium, 3% molybdenum, annealed condition, 3 mm thick x 1250 mm wide. High strength for marine applications. Under 7219.90.0025 for stainless flat-rolled >600 mm, >0.5% Ni, not tool/heat-resisting per chapter notes.
Nitronic 60 Stainless Steel Strip Coil
Nitronic 60 (UNS S21800) high-manganese austenitic stainless strip in coil form, 8% nickel, 17% Cr, 1 mm thick x 800 mm wide. Used for wear-resistant parts. Classifies 7219.90.0025 as other flat-rolled stainless >600 mm, >0.5% Ni.
AISI 321 Stainless Steel Sheet Bright Annealed
Stabilized AISI 321 stainless sheet with 9-12% nickel, 17-19% Cr, titanium-stabilized, bright annealed finish, 2 mm x 1200 mm. For welded fabrications. 7219.90.0025 as other stainless flat-rolled >600 mm wide.
17-4 PH Precipitation Hardening Stainless Sheet
17-4 PH (UNS S17400) martensitic PH stainless sheet, 3-5% Ni, 15-17.5% Cr, 4% Cu, H900 condition, 1.5 mm x 1000 mm. Aerospace grade. 7219.90.0025 for Ni>0.5% stainless flat.