Other
Flat-rolled products of stainless steel, of a width of 600 mm or more: > Other > Other: > Containing more than 0.5 percent by weight of nickel: > Other
Duty Rate (from China)
Except for products described in headings 9903.03.02–9903.03.11, articles the product of any country, as provided for in subdivision (aa) of U.S. note 2 to this subchapter
Effective with respect to entries on or after September 27, 2024, articles the product of China, as provided for in subdivision (b) of U.S. note 31 to this subchapter
Products classified under HTS 7219.90.00.25
AISI 304 Stainless Steel Sheet 2B Finish
Flat-rolled stainless steel sheet conforming to AISI 304 grade, containing approximately 8-10.5% nickel and 18-20% chromium, with a 2B cold-rolled finish. Width exceeds 600 mm, typically 1.5 mm thick, not further worked beyond basic rolling and annealing. Classifies under 7219.90.0025 due to nickel content over 0.5%, width over 600 mm, and exclusion from other specific subheadings.
AISI 316L Stainless Steel Plate No.1 Finish
Hot-rolled stainless steel plate AISI 316L grade with 10-14% nickel, 16-18% chromium, and low carbon, featuring No.1 finish (scale not fully removed). Thickness 6 mm, width 1500 mm, used in chemical processing. Fits 7219.90.0025 as flat-rolled stainless steel >600 mm wide, >0.5% Ni, not in prior 'other' subheadings.
Duplex 2205 Stainless Steel Sheet Annealed
Duplex 2205 (UNS S32205) stainless steel sheet with ~5.5-6.5% nickel, 22% chromium, 3% molybdenum, annealed condition, 3 mm thick x 1250 mm wide. High strength for marine applications. Under 7219.90.0025 for stainless flat-rolled >600 mm, >0.5% Ni, not tool/heat-resisting per chapter notes.
Nitronic 60 Stainless Steel Strip Coil
Nitronic 60 (UNS S21800) high-manganese austenitic stainless strip in coil form, 8% nickel, 17% Cr, 1 mm thick x 800 mm wide. Used for wear-resistant parts. Classifies 7219.90.0025 as other flat-rolled stainless >600 mm, >0.5% Ni.
AISI 321 Stainless Steel Sheet Bright Annealed
Stabilized AISI 321 stainless sheet with 9-12% nickel, 17-19% Cr, titanium-stabilized, bright annealed finish, 2 mm x 1200 mm. For welded fabrications. 7219.90.0025 as other stainless flat-rolled >600 mm wide.
AISI 310 Stainless Steel Hot Band
AISI 310 high-temperature stainless hot band (not pickled), 20-22% Ni, 24-26% Cr, 4 mm thick x 1500 mm wide coil. For furnace parts. Under 7219.90.0025 as Ni>0.5% flat-rolled stainless.
17-4 PH Precipitation Hardening Stainless Sheet
17-4 PH (UNS S17400) martensitic PH stainless sheet, 3-5% Ni, 15-17.5% Cr, 4% Cu, H900 condition, 1.5 mm x 1000 mm. Aerospace grade. 7219.90.0025 for Ni>0.5% stainless flat.
AL-6XN Stainless Steel Cold Rolled Sheet
AL-6XN super duplex-ish austenitic sheet, 20-22% Cr, 23-25% Ni, 6% Mo, cold rolled 2B, 2 mm x 1250 mm. Marine grade. 7219.90.0025 classification.
316Ti Stabilized Stainless Steel Sheet
316Ti titanium-stabilized, 10-14% Ni, 2 mm x 1500 mm, annealed. Weldable grade. HTS 7219.90.0025.
AISI 904L Super Austenitic Stainless Plate
904L super austenitic stainless plate, 23-28% Ni, 19-23% Cr, 4-5% Mo, 10 mm thick x 2000 mm wide. Corrosion resistant for pharma. Fits 7219.90.0025 criteria.