Type 310 Cold-Rolled Stainless Steel Plate 7mm Thick
High-temperature Type 310 stainless steel cold-rolled to 7 mm thickness, width 1500 mm, for furnace linings. HTS 7219.31.00 covers this as flat-rolled stainless, cold-reduced only, thick enough per subheading specs.
Import Duty Rates by Country of Origin
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If hot-rolled equivalent
Processing method (hot vs cold-rolled) splits classification in not-further-worked stainless.
If chemically treated surface
Phosphatizing or other chemical treatments per 'further worked' note move to 7220.
If made into cookware parts
Fabrication into kitchen articles changes to Chapter 73 iron/steel articles.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Document high nickel/chromium for Type 310 to avoid confusion with heat-resisting steel notes
• Ensure cold-rolling certification; hot-rolling would reclassify despite similar appearance
Related Products under HTS 7219.31.00
Type 304 Cold-Rolled Stainless Steel Plate 6mm Thick
A flat-rolled stainless steel plate made from Type 304 alloy, cold-rolled to a thickness of 6 mm and width exceeding 600 mm, without any further surface treatments like polishing or coating. This product falls under HTS 7219.31.00 as it is not further worked beyond cold-rolling and meets the specified thickness and width criteria for stainless steel in Chapter 72.
Type 316 Cold-Rolled Stainless Steel Sheet 5mm Thick
Cold-rolled flat-rolled product of Type 316 stainless steel, 5 mm thick and over 600 mm wide, used in corrosive environments like marine applications. Classified under HTS 7219.31.00 because it is stainless steel, cold-reduced only, with thickness of 4.75 mm or more and no further working per Chapter 72 definitions.
Duplex 2205 Cold-Rolled Stainless Steel Plate 8mm Thick
High-strength Duplex 2205 stainless steel plate, cold-rolled to 8 mm thickness and width over 600 mm, ideal for structural applications requiring corrosion resistance. HTS 7219.31.00 applies as it is flat-rolled stainless steel, not further worked than cold-rolled, meeting the thickness threshold.
Type 430 Cold-Rolled Stainless Steel Sheet 4.8mm Thick
Ferritic Type 430 stainless steel cold-reduced to exactly 4.8 mm thick, width 1000 mm, for automotive and appliance uses. Falls under HTS 7219.31.00 due to stainless steel composition, cold-rolling only, and thickness of 4.75 mm or more without further treatments.
17-4 PH Precipitation Hardening Stainless Steel Plate 10mm
Precipitation-hardening 17-4 PH stainless steel cold-rolled plate, 10 mm thick, over 600 mm wide, for aerospace components. Classified in HTS 7219.31.00 as cold-rolled stainless steel not further worked, thickness qualifying despite specialty alloy.
Type 321 Cold-Rolled Stainless Steel Sheet 5.5mm Thick
Titanium-stabilized Type 321 stainless cold-rolled sheet, 5.5 mm thick, 1200 mm wide, for welded structures. Under HTS 7219.31.00 for cold-rolled stainless flat products of qualifying thickness, no additional working.