Type 316 Cold-Rolled Stainless Steel Sheet 5mm Thick
Cold-rolled flat-rolled product of Type 316 stainless steel, 5 mm thick and over 600 mm wide, used in corrosive environments like marine applications. Classified under HTS 7219.31.00 because it is stainless steel, cold-reduced only, with thickness of 4.75 mm or more and no further working per Chapter 72 definitions.
Import Duty Rates by Country of Origin
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If thickness under 3 mm but 4.75 mm or more? No, but for reference thinner
Wait, correction in thought: for <3mm cold-rolled; but primarily 7219.32 for 3-4.75mm range.
If not stainless steel alloy
Non-stainless alloy steel cold-rolled products of similar specs fall under Chapter 72 heading 7212.
If polished or further worked
Any polishing, coating, or other surface treatments qualify as 'further worked' moving to 7220 per Chapter notes.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Certify molybdenum content for Type 316 to distinguish from other stainless grades during customs examination
• Ensure product is free of coatings or cladding, as 'further worked' treatments per Chapter notes reclassify to 7220
• Use precise gauge measurements to avoid misclassification into thinner cold-rolled subheadings
Related Products under HTS 7219.31.00
Type 304 Cold-Rolled Stainless Steel Plate 6mm Thick
A flat-rolled stainless steel plate made from Type 304 alloy, cold-rolled to a thickness of 6 mm and width exceeding 600 mm, without any further surface treatments like polishing or coating. This product falls under HTS 7219.31.00 as it is not further worked beyond cold-rolling and meets the specified thickness and width criteria for stainless steel in Chapter 72.
Duplex 2205 Cold-Rolled Stainless Steel Plate 8mm Thick
High-strength Duplex 2205 stainless steel plate, cold-rolled to 8 mm thickness and width over 600 mm, ideal for structural applications requiring corrosion resistance. HTS 7219.31.00 applies as it is flat-rolled stainless steel, not further worked than cold-rolled, meeting the thickness threshold.
Type 430 Cold-Rolled Stainless Steel Sheet 4.8mm Thick
Ferritic Type 430 stainless steel cold-reduced to exactly 4.8 mm thick, width 1000 mm, for automotive and appliance uses. Falls under HTS 7219.31.00 due to stainless steel composition, cold-rolling only, and thickness of 4.75 mm or more without further treatments.
17-4 PH Precipitation Hardening Stainless Steel Plate 10mm
Precipitation-hardening 17-4 PH stainless steel cold-rolled plate, 10 mm thick, over 600 mm wide, for aerospace components. Classified in HTS 7219.31.00 as cold-rolled stainless steel not further worked, thickness qualifying despite specialty alloy.
Type 321 Cold-Rolled Stainless Steel Sheet 5.5mm Thick
Titanium-stabilized Type 321 stainless cold-rolled sheet, 5.5 mm thick, 1200 mm wide, for welded structures. Under HTS 7219.31.00 for cold-rolled stainless flat products of qualifying thickness, no additional working.
Nitronic 60 Cold-Rolled Stainless Plate 6.5mm Thick
High-manganese Nitronic 60 stainless steel cold-rolled to 6.5 mm, wide format for wear-resistant applications. HTS 7219.31.00 as stainless flat-rolled, cold-reduced, thick per criteria.