Type 321 Cold-Rolled Stainless Steel Sheet 5.5mm Thick
Titanium-stabilized Type 321 stainless cold-rolled sheet, 5.5 mm thick, 1200 mm wide, for welded structures. Under HTS 7219.31.00 for cold-rolled stainless flat products of qualifying thickness, no additional working.
Import Duty Rates by Country of Origin
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If high-strength steel per note (a)
Yield strength and thickness specs matching high-strength definition shift alloy steel classification.
If narrower width and electrical use
Under 600 mm width plus silicon content for electrical purposes goes to 7225.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right HTS code — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Provide stabilization element (titanium) analysis to confirm stabilized austenitic grade
• Measure thickness uniformly; variations could average under 4.75 mm threshold
• Comply with AD/CVD orders on certain stainless from specific countries
Related Products under HTS 7219.31.00
Type 304 Cold-Rolled Stainless Steel Plate 6mm Thick
A flat-rolled stainless steel plate made from Type 304 alloy, cold-rolled to a thickness of 6 mm and width exceeding 600 mm, without any further surface treatments like polishing or coating. This product falls under HTS 7219.31.00 as it is not further worked beyond cold-rolling and meets the specified thickness and width criteria for stainless steel in Chapter 72.
Type 316 Cold-Rolled Stainless Steel Sheet 5mm Thick
Cold-rolled flat-rolled product of Type 316 stainless steel, 5 mm thick and over 600 mm wide, used in corrosive environments like marine applications. Classified under HTS 7219.31.00 because it is stainless steel, cold-reduced only, with thickness of 4.75 mm or more and no further working per Chapter 72 definitions.
Duplex 2205 Cold-Rolled Stainless Steel Plate 8mm Thick
High-strength Duplex 2205 stainless steel plate, cold-rolled to 8 mm thickness and width over 600 mm, ideal for structural applications requiring corrosion resistance. HTS 7219.31.00 applies as it is flat-rolled stainless steel, not further worked than cold-rolled, meeting the thickness threshold.
Type 430 Cold-Rolled Stainless Steel Sheet 4.8mm Thick
Ferritic Type 430 stainless steel cold-reduced to exactly 4.8 mm thick, width 1000 mm, for automotive and appliance uses. Falls under HTS 7219.31.00 due to stainless steel composition, cold-rolling only, and thickness of 4.75 mm or more without further treatments.
17-4 PH Precipitation Hardening Stainless Steel Plate 10mm
Precipitation-hardening 17-4 PH stainless steel cold-rolled plate, 10 mm thick, over 600 mm wide, for aerospace components. Classified in HTS 7219.31.00 as cold-rolled stainless steel not further worked, thickness qualifying despite specialty alloy.
Nitronic 60 Cold-Rolled Stainless Plate 6.5mm Thick
High-manganese Nitronic 60 stainless steel cold-rolled to 6.5 mm, wide format for wear-resistant applications. HTS 7219.31.00 as stainless flat-rolled, cold-reduced, thick per criteria.