AL-6XN Cold-Rolled Stainless Steel Plate 9mm Thick
Super-austenitic AL-6XN stainless cold-rolled plate 9 mm thick for chemical processing. HTS 7219.31.00 for cold-rolled stainless flat products meeting specs.
Import Duty Rates by Country of Origin
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If with nonmetallic coating
Plastics coating = further worked per Chapter definition.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• High Mo/Ni certification for super-austenitic verification
• Section 232 steel tariff applicability check
Related Products under HTS 7219.31.00
Type 304 Cold-Rolled Stainless Steel Plate 6mm Thick
A flat-rolled stainless steel plate made from Type 304 alloy, cold-rolled to a thickness of 6 mm and width exceeding 600 mm, without any further surface treatments like polishing or coating. This product falls under HTS 7219.31.00 as it is not further worked beyond cold-rolling and meets the specified thickness and width criteria for stainless steel in Chapter 72.
Type 316 Cold-Rolled Stainless Steel Sheet 5mm Thick
Cold-rolled flat-rolled product of Type 316 stainless steel, 5 mm thick and over 600 mm wide, used in corrosive environments like marine applications. Classified under HTS 7219.31.00 because it is stainless steel, cold-reduced only, with thickness of 4.75 mm or more and no further working per Chapter 72 definitions.
Duplex 2205 Cold-Rolled Stainless Steel Plate 8mm Thick
High-strength Duplex 2205 stainless steel plate, cold-rolled to 8 mm thickness and width over 600 mm, ideal for structural applications requiring corrosion resistance. HTS 7219.31.00 applies as it is flat-rolled stainless steel, not further worked than cold-rolled, meeting the thickness threshold.
Type 430 Cold-Rolled Stainless Steel Sheet 4.8mm Thick
Ferritic Type 430 stainless steel cold-reduced to exactly 4.8 mm thick, width 1000 mm, for automotive and appliance uses. Falls under HTS 7219.31.00 due to stainless steel composition, cold-rolling only, and thickness of 4.75 mm or more without further treatments.
17-4 PH Precipitation Hardening Stainless Steel Plate 10mm
Precipitation-hardening 17-4 PH stainless steel cold-rolled plate, 10 mm thick, over 600 mm wide, for aerospace components. Classified in HTS 7219.31.00 as cold-rolled stainless steel not further worked, thickness qualifying despite specialty alloy.
Type 321 Cold-Rolled Stainless Steel Sheet 5.5mm Thick
Titanium-stabilized Type 321 stainless cold-rolled sheet, 5.5 mm thick, 1200 mm wide, for welded structures. Under HTS 7219.31.00 for cold-rolled stainless flat products of qualifying thickness, no additional working.