B5 Biodiesel Blend Heating Oil
A B5 blend combining 5% biodiesel with 95% petroleum distillate, used for residential and commercial heating, with API gravity exceeding 25 degrees. This product qualifies for HTS 2710.20.10 due to its high petroleum oil content and fuel oil characteristics.
Import Duty Rates by Country of Origin
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If pure petroleum heating oil without biodiesel
Heating oils lacking biodiesel component are classified in the non-biodiesel distillate fuel oils subheading.
If testing under 25 degrees API
Lower API gravity fuel oils, typically heavier residuals, fall into the companion subheading 2710.20.20.
If contains lubricating additives >30%
Preparations with significant lubricant base oils shift to Chapter 34 lubricating oil headings.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right HTS code — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Provide fatty acid methyl ester (FAME) certificates for biodiesel verification; label blends accurately to prevent reclassification; check state-specific fuel quality regulations during customs clearance
Related Products under HTS 2710.20.10
No. 2 Diesel Fuel
No. 2 diesel fuel is a middle distillate petroleum oil used primarily for heating and transportation, with an API gravity of 30-40 degrees, classifying it under HTS 2710.20.10 as a distillate fuel oil testing 25 degrees API or more. It contains biodiesel blends meeting the 70% petroleum oil threshold and is not crude.
Ultra-Low Sulfur Diesel (ULSD)
ULSD is a refined No. 2 diesel with sulfur content under 15 ppm, API gravity 30-42 degrees, often blended with biodiesel for on-road use. It meets HTS 2710.20.10 criteria as a high-API distillate fuel oil containing biodiesel.
Kerosene Fuel Oil Blend
A biodiesel-blended kerosene-grade distillate used for industrial burners and turbines, with API gravity above 25 degrees. Classified in HTS 2710.20.10 for its distillate fuel properties and petroleum-dominant composition.
Marine Diesel Oil (MDO) Light Blend
Light marine diesel oil with biodiesel admixture and API gravity ≥25 degrees, used in auxiliary engines. HTS 2710.20.10 applies to this distillate fuel oil preparation exceeding 70% petroleum oils.
Industrial Furnace Oil No. 2 Grade
No. 2 grade furnace oil blended with biodiesel for manufacturing boilers, API gravity 28-35 degrees. This distillate fuel qualifies under HTS 2710.20.10 as a petroleum-based preparation.
B20 Biodiesel Highway Diesel
B20 blend (20% biodiesel, 80% petroleum diesel) for highway vehicles, API gravity over 25 degrees. Meets HTS 2710.20.10 for biodiesel-containing distillate fuels.