Share:|Follow us on LinkedIn

Having a Saybolt Universal viscosity at 37.8˚C of more than 125 seconds (heavy fuel oils)

Petroleum oils and oils obtained from bituminous minerals, other than crude; preparations not elsewhere specified or included, containing by weight 70 percent or more of petroleum oils or of oils obtained from bituminous minerals, these oils being the basic constituents of the preparations; waste oils: > Petroleum oils and oils obtained from bituminous minerals (other than crude) and preparations not elsewhere specified or included containing by weight 70 percent or more of petroleum oils or of oils obtained from bituminous minerals, these oils being the basic constituents of the preparations, containing biodiesel, other than waste oils: > Distillate and residual fuel oils (including blended fuel oils): > Testing 25 degrees A.P.I. or more > Having a Saybolt Universal viscosity at 37.8˚C of more than 125 seconds (heavy fuel oils)

Duty Rate (from China)

25%
MFN Base RateFree
9903.88.03+25%

Except as provided in headings 9903.88.13, 9903.88.18, 9903.88.33, 9903.88.34, 9903.88.35, 9903.88.36, 9903.88.37, 9903.88.38, 9903.88.40, 9903.88.41, 9903.88.43, 9903.88.45, 9903.88.46, 9903.88.48, 9903.88.56, 9903.88.64, 9903.88.66, 9903.88.67, 9903.88.68, or 9903.88.69, articles the product of China, as provided for in U.S. note 20(e) to this subchapter and as provided for in the subheadings enumerated in U.S. note 20(f)

9903.03.03+0%

Articles the product of any country, as provided for in subdivision (aa)(ii) of U.S. note 2 to this subchapter

Total Effective Rate25%

Subheadings

2710.20.10.02Containing not more than 15 ppm of sulfur
→
2710.20.10.03Containing more than 15 ppm but not more than 500 ppm of sulfur
→
2710.20.10.04Containing more than 500 ppm of sulfur
→
2710.20.10.05Containing not more than 15 ppm of sulfur
→
2710.20.10.07Containing more than 15 ppm but not more than 500 ppm of sulfur
→
2710.20.10.08Containing more than 500 ppm of sulfur
→
2710.20.10.11Containing not more than 15 ppm of sulfur
→
2710.20.10.13Containing more than 15 ppm but not more than 500 ppm of sulfur
→
2710.20.10.14Containing more than 500 ppm of sulfur
→
2710.20.10.15Containing not more than 500 ppm of sulfur
→
2710.20.10.25Containing more than 500 ppm of sulfur
→
2710.20.10.50Having a Saybolt Universal viscosity at 37.8˚C of more than 125 seconds (heavy fuel oils)
→
Calculate exact duty for your shipmentNot sure about classification? Try AI Classifier

Products classified under HTS 2710.20.10

No. 2 Diesel Fuel

No. 2 diesel fuel is a middle distillate petroleum oil used primarily for heating and transportation, with an API gravity of 30-40 degrees, classifying it under HTS 2710.20.10 as a distillate fuel oil testing 25 degrees API or more. It contains biodiesel blends meeting the 70% petroleum oil threshold and is not crude.

B5 Biodiesel Blend Heating Oil

A B5 blend combining 5% biodiesel with 95% petroleum distillate, used for residential and commercial heating, with API gravity exceeding 25 degrees. This product qualifies for HTS 2710.20.10 due to its high petroleum oil content and fuel oil characteristics.

Ultra-Low Sulfur Diesel (ULSD)

ULSD is a refined No. 2 diesel with sulfur content under 15 ppm, API gravity 30-42 degrees, often blended with biodiesel for on-road use. It meets HTS 2710.20.10 criteria as a high-API distillate fuel oil containing biodiesel.

Kerosene Fuel Oil Blend

A biodiesel-blended kerosene-grade distillate used for industrial burners and turbines, with API gravity above 25 degrees. Classified in HTS 2710.20.10 for its distillate fuel properties and petroleum-dominant composition.

Marine Diesel Oil (MDO) Light Blend

Light marine diesel oil with biodiesel admixture and API gravity ≥25 degrees, used in auxiliary engines. HTS 2710.20.10 applies to this distillate fuel oil preparation exceeding 70% petroleum oils.

Industrial Furnace Oil No. 2 Grade

No. 2 grade furnace oil blended with biodiesel for manufacturing boilers, API gravity 28-35 degrees. This distillate fuel qualifies under HTS 2710.20.10 as a petroleum-based preparation.

B20 Biodiesel Highway Diesel

B20 blend (20% biodiesel, 80% petroleum diesel) for highway vehicles, API gravity over 25 degrees. Meets HTS 2710.20.10 for biodiesel-containing distillate fuels.