Containing more than 15 ppm but not more than 500 ppm of sulfur
Petroleum oils and oils obtained from bituminous minerals, other than crude; preparations not elsewhere specified or included, containing by weight 70 percent or more of petroleum oils or of oils obtained from bituminous minerals, these oils being the basic constituents of the preparations; waste oils: > Petroleum oils and oils obtained from bituminous minerals (other than crude) and preparations not elsewhere specified or included containing by weight 70 percent or more of petroleum oils or of oils obtained from bituminous minerals, these oils being the basic constituents of the preparations, containing biodiesel, other than waste oils: > Distillate and residual fuel oils (including blended fuel oils): > Testing 25 degrees A.P.I. or more > Having a Saybolt Universal viscosity at 37.8˚C of less than 45 seconds (light fuel oils): > Fuel oils Nos. 2 and 3: > Other: > Containing more than 15 ppm but not more than 500 ppm of sulfur
Duty Rate (from China)
Except as provided in headings 9903.88.13, 9903.88.18, 9903.88.33, 9903.88.34, 9903.88.35, 9903.88.36, 9903.88.37, 9903.88.38, 9903.88.40, 9903.88.41, 9903.88.43, 9903.88.45, 9903.88.46, 9903.88.48, 9903.88.56, 9903.88.64, 9903.88.66, 9903.88.67, 9903.88.68, or 9903.88.69, articles the product of China, as provided for in U.S. note 20(e) to this subchapter and as provided for in the subheadings enumerated in U.S. note 20(f)
Articles the product of any country, as provided for in subdivision (aa)(ii) of U.S. note 2 to this subchapter
Products classified under HTS 2710.20.10.07
Ultra-Low Sulfur No. 2 Fuel Oil (15-500 ppm S)
This is a light distillate fuel oil classified as No. 2 fuel oil with a Saybolt Universal viscosity at 37.8°C of less than 45 seconds and API gravity of 25 degrees or more, containing biodiesel and between 16-500 ppm sulfur. It meets HTS 2710.20.10.07 specifications for blended fuel oils used in heating and diesel applications where low sulfur is mandated. The biodiesel content ensures it qualifies under the 'containing biodiesel' subheading.
Biodiesel-Blended Home Heating Oil No. 2 (Low Sulfur)
A No. 2 distillate heating oil blended with biodiesel, featuring 16-500 ppm sulfur, API gravity ≥25°, and viscosity <45 SUS at 37.8°C, designed for residential boilers. It fits HTS 2710.20.10.07 as a light fuel oil preparation with ≥70% petroleum oils as basic constituents. Low sulfur complies with EPA regulations for non-road and heating use.
Low-Sulfur No. 2 Diesel Fuel with Biodiesel (16-500 ppm S)
This No. 2 diesel-grade fuel oil contains biodiesel, has sulfur between 16-500 ppm, meets light fuel oil specs (API ≥25°, <45 SUS at 37.8°C), for off-road and marine use. Classified under HTS 2710.20.10.07 due to its distillate nature and biodiesel inclusion as a preparation with ≥70% petroleum oils.
No. 3 Fuel Oil Blend Low Sulfur Biodiesel (15-500 ppm)
A blended No. 3 light fuel oil with biodiesel, sulfur 16-500 ppm, viscosity <45 SUS at 37.8°C, API ≥25°, used in industrial burners. It matches HTS 2710.20.10.07 for fuel oils Nos. 2 and 3 with specified properties and biodiesel content.
B20 Biodiesel No. 2 Heating Oil (Low Sulfur)
B20 blend (20% biodiesel, 80% No. 2 petroleum distillate) with 100-400 ppm sulfur, light fuel oil specs per HTS 2710.20.10.07 for Nos. 2/3 fuels. Used for commercial heating systems meeting regional low-sulfur standards.
Industrial Low-Sulfur Fuel Oil No. 2-GT Biodiesel Blend
No. 2-GT grade fuel oil (gas turbine compatible) blended with biodiesel, 50-300 ppm sulfur, <45 SUS viscosity, API ≥25°, under HTS 2710.20.10.07. Designed for stationary engines and turbines.
Marine Auxiliary Boiler Fuel Oil No. 2 Low Sulfur Blend
Biodiesel-blended No. 2 fuel for marine auxiliary boilers, 20-450 ppm sulfur, light distillate per HTS 2710.20.10.07 specs. Complies with ECA low-sulfur requirements outside ULSFO.