Industrial Low-Sulfur Fuel Oil No. 2-GT Biodiesel Blend
No. 2-GT grade fuel oil (gas turbine compatible) blended with biodiesel, 50-300 ppm sulfur, <45 SUS viscosity, API ≥25°, under HTS 2710.20.10.07. Designed for stationary engines and turbines.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If imported as gas turbine fuel set
If sold as complete fuel system component, may classify under machinery parts.
If sulfur >500 ppm
Higher sulfur levels have separate subheading within same fuel category.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Certify vanadum/ash content for GT use; provide ISO 8217 marine fuel equiv specs if applicable; pitfall: incorrect API measurement
Related Products under HTS 2710.20.10.07
Ultra-Low Sulfur No. 2 Fuel Oil (15-500 ppm S)
This is a light distillate fuel oil classified as No. 2 fuel oil with a Saybolt Universal viscosity at 37.8°C of less than 45 seconds and API gravity of 25 degrees or more, containing biodiesel and between 16-500 ppm sulfur. It meets HTS 2710.20.10.07 specifications for blended fuel oils used in heating and diesel applications where low sulfur is mandated. The biodiesel content ensures it qualifies under the 'containing biodiesel' subheading.
Biodiesel-Blended Home Heating Oil No. 2 (Low Sulfur)
A No. 2 distillate heating oil blended with biodiesel, featuring 16-500 ppm sulfur, API gravity ≥25°, and viscosity <45 SUS at 37.8°C, designed for residential boilers. It fits HTS 2710.20.10.07 as a light fuel oil preparation with ≥70% petroleum oils as basic constituents. Low sulfur complies with EPA regulations for non-road and heating use.
Low-Sulfur No. 2 Diesel Fuel with Biodiesel (16-500 ppm S)
This No. 2 diesel-grade fuel oil contains biodiesel, has sulfur between 16-500 ppm, meets light fuel oil specs (API ≥25°, <45 SUS at 37.8°C), for off-road and marine use. Classified under HTS 2710.20.10.07 due to its distillate nature and biodiesel inclusion as a preparation with ≥70% petroleum oils.
No. 3 Fuel Oil Blend Low Sulfur Biodiesel (15-500 ppm)
A blended No. 3 light fuel oil with biodiesel, sulfur 16-500 ppm, viscosity <45 SUS at 37.8°C, API ≥25°, used in industrial burners. It matches HTS 2710.20.10.07 for fuel oils Nos. 2 and 3 with specified properties and biodiesel content.
B20 Biodiesel No. 2 Heating Oil (Low Sulfur)
B20 blend (20% biodiesel, 80% No. 2 petroleum distillate) with 100-400 ppm sulfur, light fuel oil specs per HTS 2710.20.10.07 for Nos. 2/3 fuels. Used for commercial heating systems meeting regional low-sulfur standards.
Marine Auxiliary Boiler Fuel Oil No. 2 Low Sulfur Blend
Biodiesel-blended No. 2 fuel for marine auxiliary boilers, 20-450 ppm sulfur, light distillate per HTS 2710.20.10.07 specs. Complies with ECA low-sulfur requirements outside ULSFO.