Biodiesel-Blended ULSD #2 (15 ppm Sulfur)
A preparation of petroleum-derived Diesel #2 blended with biodiesel (mono-alkyl esters), limited to 15 ppm sulfur for clean combustion in trucks and cars. Classified in HTS 2710.20.10.02 as a light fuel oil (Nos. 2/3) with the required physical specs and biodiesel content.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If biodiesel is the primary constituent (>50%)
Anti-freeze/fluid preparations with high biodiesel shift to Chapter 38 for non-petroleum fuel mixes.
If viscosity ≥45 Saybolt seconds
Higher viscosity at 37.8°C classifies as medium/heavy fuel oils in subsequent subheadings.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Submit fatty acid methyl ester (FAME) analysis for biodiesel verification per subheading definition
• Use ISO 8217-compliant specs for marine/off-road if applicable, but confirm highway-grade for this code
Related Products under HTS 2710.20.10.02
Ultra-Low Sulfur Diesel #2 (15 ppm)
This is a light distillate fuel oil classified as Diesel #2 with a sulfur content not exceeding 15 ppm, meeting strict environmental standards for on-road use. It tests 25 degrees A.P.I. or more and has a Saybolt Universal viscosity at 37.8°C of less than 45 seconds, fitting precisely under HTS 2710.20.10.02 as a non-crude petroleum oil containing biodiesel blends where applicable.
Highway Ultra-Low Sulfur Diesel (≤15 ppm)
Premium diesel for on-highway vehicles, refined to ≤15 ppm sulfur with biodiesel admixture for better lubricity and emissions. Meets HTS 2710.20.10.02 criteria as Diesel #2 light fuel oil: API ≥25°, viscosity <45 SUS.
Winterized Low-Sulfur Diesel #2
Diesel #2 treated for cold weather with pour point depressants, ≤15 ppm sulfur, and biodiesel for on-road use. Fits HTS 2710.20.10.02 as a preparation ≥70% petroleum oils with light fuel specs.
Low-Sulfur Diesel Fuel Oil No. 2
Diesel Fuel Oil No. 2 optimized for low emissions with ≤15 ppm sulfur, used in highway diesel engines and meeting EPA standards. It qualifies under HTS 2710.20.10.02 due to its light fuel oil characteristics: ≥25° API, <45 Saybolt seconds viscosity at 37.8°C, and inclusion of biodiesel as basic constituent.