Other
Flat-rolled products of other alloy steel, of a width of less than 600 mm. > Other: > Other
Duty Rate (from China)
Subheadings
Products classified under Tariff item 7226.9
100Cr6 Hot-Rolled Ball-Bearing Steel Strip
European 100Cr6 grade hot-rolled steel strip for ball-bearing production, 320 mm wide and 2.5 mm thick, with controlled carbon (0.95-1.13%) and chromium (1.25-1.65%) content. This flat-rolled product of other alloy steel, width less than 600 mm, is not further worked than hot-rolled, meeting the definition of other alloy steel under Chapter 72 Note 1(f).
7226.91.001.2379 Tool Steel Hot-Rolled Strip 380mm Wide
DIN 1.2379 (X153CrMoV12) tool steel hot-rolled strip, 380 mm wide, intended for blanking dies. This is an other alloy steel with high chromium and carbon content, classified as tool steel. The strip has only been hot-rolled with a mill finish and no further working.
7226.91.0052100 High-Carbon Hot-Rolled Bearing Steel Plate
ASTM A485 Grade 52100 hot-rolled plate for demanding bearing applications, 450 mm wide and 5 mm thick, with ball-bearing steel chemistry including 1.05% carbon and 1.45% chromium. This flat-rolled product of other alloy steel, width less than 600 mm, is not further worked than hot-rolled, meeting the definition of other alloy steel under Chapter 72 Note 1(f).
7226.91.0052100 Hot-Rolled Bearing Quality Steel Slit Coil Stock
Hot-rolled 52100 bearing quality steel slit coil stock, slit to 280 mm width and 4 mm thick, is a flat-rolled product of other alloy steel not further worked than hot-rolling. It is used for bearing production. The width under 600 mm and the lack of further processing place it under tariff item 7226.91.00.
7226.91.00A2 Tool Steel Hot-Rolled Plate 350mm Wide
A2 air-hardening tool steel hot-rolled plate, 350 mm wide, used for shear blades and forming tools. This alloy steel contains chromium in the range of 1.25% to 10.5% and carbon between 0.3% and 1.25%, meeting the definition of tool steel. The plate has not been further worked than hot rolling.
7226.91.00AISI 52100 Hot-Rolled Ball-Bearing Steel Sheet
Flat-rolled alloy steel sheet made from AISI 52100 grade, specifically formulated for ball-bearing applications with precise carbon (0.95-1.13%) and chromium (1.25-1.65%) content. This flat-rolled product of other alloy steel, width less than 600 mm, is not further worked than hot-rolled, meeting the definition of other alloy steel under Chapter 72 Note 1(f).
7226.91.00Chipper Knife Steel Hot-Rolled Sheet 2.5mm x 300mm
Hot-rolled chipper knife steel sheet, 2.5 mm thick and 300 mm wide, alloyed with 0.52% carbon, 8.0% chromium, and 1.4% molybdenum. This flat-rolled product of other alloy steel, width less than 600 mm, is not further worked than hot-rolled, meeting the definition of other alloy steel under Chapter 72 Note 1(f).
7226.91.00Chipper Knife Steel Hot-Rolled Strip 1.2mm Thick
Hot-rolled alloy steel strip, 1.2 mm thick and 150 mm wide, formulated as chipper knife steel with 0.5% carbon, 8.5% chromium, and 1.5% molybdenum. This flat-rolled product of other alloy steel, width less than 600 mm, is not further worked than hot-rolled, meeting the definition of other alloy steel under Chapter 72 Note 1(f).
7226.91.00CPM-M4 Tool Steel Hot-Rolled Sheet 450mm Wide
CPM-M4 powder metallurgy tool steel hot-rolled sheet, 450 mm wide, for high-wear plastic molds. This other alloy steel contains molybdenum and tungsten in significant amounts, classifying it as tool steel. The sheet has only been hot-rolled with no further processing.
7226.91.00Custom Chipper Knife Steel Hot-Rolled Band 1.5mm
Specialty hot-rolled band of chipper knife steel, 1.5 mm thick and 200 mm wide, with composition including 0.53% carbon, 8.2% chromium, 1.6% molybdenum, and 0.3% vanadium. This flat-rolled product of other alloy steel, width less than 600 mm, is not further worked than hot-rolled, meeting the definition of other alloy steel under Chapter 72 Note 1(f).
7226.91.00D2 Tool Steel Hot-Rolled Sheet 400mm Wide
D2 tool steel hot-rolled sheet, 400 mm wide and approximately 6 mm thick, used for industrial dies and punches. This is an other alloy steel with high carbon (over 1.2%) and high chromium (over 10.5%) content, classified as tool steel. The sheet has not been further worked than hot rolling.
7226.91.00GCr15 Hot-Rolled Ball-Bearing Steel Sheet
Chinese GB/T GCr15 high-carbon chromium bearing steel sheet, hot-rolled to 380 mm width and 3.2 mm thickness, conforming to ball-bearing steel composition with approximately 1.0% carbon and 1.5% chromium. This flat-rolled product of other alloy steel, width less than 600 mm, is not further worked than hot-rolled, meeting the definition of other alloy steel under Chapter 72 Note 1(f).
7226.91.00H13 Tool Steel Hot-Rolled Sheet 320mm Wide
H13 hot work tool steel sheet, hot-rolled, 320 mm wide, for aluminum die casting molds. This alloy steel contains chromium and carbon in proportions that classify it as tool steel under Chapter 72. The sheet has not been further worked than hot rolling.
7226.91.00Hot-Rolled 52100 Tool Steel Sheet 220mm Wide
52100 bearing tool steel hot-rolled sheet, 220 mm wide, matching ball-bearing steel specifications. This alloy steel contains approximately 1.0% carbon and 1.5% chromium, classifying it as other alloy steel. The sheet has not been further worked than hot rolling.
7226.91.00Hot-Rolled A2 Tool Steel Plate 500mm Wide
A2 air-hardening tool steel plate, hot-rolled only, 500 mm wide, used for die making and precision tooling. This flat-rolled product of other alloy steel, width less than 600 mm, is not further worked than hot-rolled, meeting the definition of other alloy steel under Chapter 72 Note 1(f) with chromium content of 5%.
7226.91.00Hot-Rolled A2 Tool Steel Strip 150mm Wide
Hot-rolled A2 air-hardening tool steel strip, 150 mm wide by 2.5 mm thick, without further working such as polishing or coating. This alloy steel contains chromium and carbon in tool steel proportions. The strip has only been hot-rolled.
7226.91.00Hot-Rolled A6 Tool Steel Strip 140mm Wide
A6 tool steel hot-rolled strip, 140 mm wide, an air-hardening tool steel used for dies and molds. This alloy steel contains chromium and molybdenum, classifying it as tool steel. The strip has not been further worked than hot rolling.
7226.91.00Hot-Rolled CPM-M4 Tool Steel Plate 450mm Wide
CPM-M4 powder metallurgy tool steel plate, hot-rolled finish, 450 mm wide, for high-wear tooling applications. This flat-rolled product of other alloy steel, width less than 600 mm, is not further worked than hot-rolled, meeting the definition of other alloy steel under Chapter 72 Note 1(f) with molybdenum, tungsten, and vanadium content.
7226.91.00Hot-Rolled CPM-M4 Tool Steel Sheet 180mm Wide
CPM-M4 high-vanadium tool steel sheet, hot-rolled, 180 mm wide by 2 mm thick, with no further processing. This particle metallurgy steel contains molybdenum and tungsten, classifying it as tool steel. The sheet is used for wear-resistant dies and inserts.
7226.91.00Hot-Rolled D2 Tool Steel Sheet 200mm Wide
D2 tool steel hot-rolled sheet, 200 mm wide and 3 mm thick, with no further surface treatment. This alloy steel contains over 1.2% carbon and over 10.5% chromium, classifying it as tool steel. The sheet is used for industrial dies and cutting tools.
7226.91.00Hot-Rolled D2 Tool Steel Sheet 400mm Wide
Flat-rolled D2 tool steel sheet, hot-rolled with no further surface treatment, measuring 400 mm in width and under 600 mm overall. This product of other alloy steel, width less than 600 mm, is not further worked than hot-rolled, meeting the definition of other alloy steel under Chapter 72 Note 1(f) with high carbon and chromium content.
7226.91.00Hot-Rolled D3 Tool Steel Plate 210mm Wide
D3 high-carbon, high-chromium tool steel hot-rolled plate, 210 mm wide. This alloy steel contains over 1.2% carbon and over 10.5% chromium, classifying it as tool steel. The plate has not been further worked than hot rolling.
7226.91.00Hot-Rolled F2 Tool Steel Strip 270mm Wide
Hot-rolled F2 tool steel strip, 270 mm wide, is a flat-rolled product of other alloy steel not further worked than hot-rolling. It is used for chipper knives and general tooling applications. The width of less than 600 mm and the absence of any cold-working or coating place it under tariff item 7226.91.00.
7226.91.00Hot-Rolled H13 Tool Steel Plate 280mm Wide
Hot-rolled H13 tool steel plate, 280 mm wide and 5 mm thick, is a flat-rolled product of other alloy steel not further worked than hot-rolling. It is used for die casting molds and hot work tooling. The width under 600 mm and the lack of further processing place it under tariff item 7226.91.00.
7226.91.00Hot-Rolled H13 Tool Steel Plate 380mm Wide
H13 hot work tool steel plate, hot-rolled surface, 380 mm wide, for die casting molds. This flat-rolled product of other alloy steel, width less than 600 mm, is not further worked than hot-rolled, meeting the definition of other alloy steel under Chapter 72 Note 1(f) with chromium, molybdenum, and vanadium content.
7226.91.00Hot-Rolled L6 Tool Steel Strip 100mm Wide
Hot-rolled L6 tool steel strip, 100 mm wide, is a flat-rolled product of other alloy steel not further worked than hot-rolling. It is used for aircraft tooling and general industrial applications. The width under 600 mm and the absence of further processing place it under tariff item 7226.91.00.
7226.91.00Hot-Rolled M2 Tool Steel Sheet 240mm Wide
Hot-rolled M2 tool steel sheet, 240 mm wide, is a flat-rolled product of other alloy steel not further worked than hot-rolling. It is used for cutting tools and wear-resistant applications. The width under 600 mm and the lack of further processing place it under tariff item 7226.91.00.
7226.91.00Hot-Rolled O1 Tool Steel Plate 250mm Wide
Hot-rolled O1 tool steel plate, 250 mm wide and 4 mm thick, is a flat-rolled product of other alloy steel not further worked than hot-rolling. It is used for oil-hardening tooling applications. The width under 600 mm and the absence of further processing place it under tariff item 7226.91.00.
7226.91.00Hot-Rolled O1 Tool Steel Sheet 350mm Wide
O1 oil-hardening tool steel flat-rolled product, hot-rolled condition, 350 mm wide, for gauge and fixture applications. This flat-rolled product of other alloy steel, width less than 600 mm, is not further worked than hot-rolled, meeting the definition of other alloy steel under Chapter 72 Note 1(f) with manganese content.
7226.91.00Hot-Rolled P20 Tool Steel Sheet 260mm Wide
Hot-rolled P20 tool steel sheet, 260 mm wide, is a flat-rolled product of other alloy steel not further worked than hot-rolling. It is used for pre-hardened mold applications. The width under 600 mm and the lack of further processing place it under tariff item 7226.91.00.
7226.91.00Hot-Rolled S7 Tool Steel Sheet 320mm Wide
S7 shock-resisting tool steel sheet, hot-rolled, 320 mm wide, for impact tooling applications. This flat-rolled product of other alloy steel, width less than 600 mm, is not further worked than hot-rolled, meeting the definition of other alloy steel under Chapter 72 Note 1(f) with chromium and molybdenum content.
7226.91.00Hot-Rolled S7 Tool Steel Strip 120mm Wide
Hot-rolled S7 tool steel strip, 120 mm wide and 3.5 mm thick, is a flat-rolled product of other alloy steel not further worked than hot-rolling. It is used for shock-resisting tools such as punches and shear knives. The width under 600 mm and the absence of further processing place it under tariff item 7226.91.00.
7226.91.00Hot-Rolled T1 Tool Steel Plate 190mm Wide
Hot-rolled T1 tool steel plate, 190 mm wide, is a flat-rolled product of other alloy steel not further worked than hot-rolling. It is used for tungsten-based tooling applications. The width under 600 mm and the lack of further processing place it under tariff item 7226.91.00.
7226.91.00Hot-Rolled W1 Tool Steel Sheet 160mm Wide
Hot-rolled W1 tool steel sheet, 160 mm wide, is a flat-rolled product of other alloy steel not further worked than hot-rolling. It is used for water-hardening tooling applications. The width under 600 mm and the absence of further processing place it under tariff item 7226.91.00.
7226.91.00Industrial Chipper Knife Steel Plate 4mm x 500mm
Hot-rolled plate of chipper knife steel, 4 mm thick and 500 mm wide, alloyed with 0.48-0.55% carbon, 8.5% chromium, and 1.5% molybdenum. This flat-rolled product of other alloy steel, width less than 600 mm, is not further worked than hot-rolled, meeting the definition of other alloy steel under Chapter 72 Note 1(f).
7226.91.00M2 Tool Steel Hot-Rolled Plate 300mm Wide
M2 high-speed tool steel hot-rolled plate, exactly 300 mm wide, for cutters. This steel contains molybdenum, tungsten, and vanadium, and may be classified as 'other' tool steel if it does not fully meet the high-speed steel definition. The plate has not been further worked than hot rolling.
7226.91.00O1 Tool Steel Hot-Rolled Strip 310mm Wide
O1 oil-hardening tool steel hot-rolled strip, 310 mm wide, for drill bushings and gauges. This alloy steel contains approximately 0.85% carbon and 1.0-1.8% manganese, classifying it as tool steel. The strip has not been further worked than hot rolling.
7226.91.00Precision Chipper Knife Steel Strip 0.8mm Hot-Rolled
Narrow hot-rolled strip of chipper knife steel, 0.8 mm thick and 50 mm wide, containing 0.50% carbon, 7.8% chromium, 1.3% molybdenum, 0.9% silicon, and trace vanadium. This flat-rolled product of other alloy steel, width less than 600 mm, is not further worked than hot-rolled, meeting the definition of other alloy steel under Chapter 72 Note 1(f).
7226.91.00S7 Tool Steel Hot-Rolled Plate 500mm Wide
S7 shock-resisting tool steel hot-rolled plate, 500 mm wide, for pneumatic tools and punches. This alloy steel contains high chromium and carbon, classifying it as tool steel under Chapter 72. The plate has not been further worked than hot rolling.
7226.91.00SUJ2 Hot-Rolled Ball-Bearing Steel Plate
SUJ2 hot-rolled flat steel plate, a Japanese JIS grade alloy steel designed for ball bearings. It contains approximately 1.0% carbon and 1.5% chromium, meeting the definition of other alloy steel under Chapter 72. The plate is 350 mm wide and 4 mm thick, and has not been further worked beyond hot rolling.
7226.92.0052100 Chrome Alloy Cold-Rolled Bearing Steel Band
52100 chrome alloy cold-rolled band steel, 0.8 mm thick and 290 mm wide, vacuum-degassed for ultra-clean bearing quality with minimum inclusions. It is not further worked beyond cold rolling, making it suitable for bearing components. This product is classified under tariff item 7226.92.00 as a flat-rolled product of other alloy steel, width less than 600 mm, not further worked than cold-rolled.
7226.92.0052100-Modified Cold-Rolled Bearing Steel Plate
> Modified AISI 52100 cold-rolled plate stock for custom bearing fabrication, 380 mm width, solely cold-rolled. This is a flat-rolled product of other alloy steel, width less than 600 mm, not further worked than cold-rolled.
7226.92.00A2 Cold-Rolled Tool Steel Plate
A2 tool steel cold-rolled plate, 150 mm wide and 2 mm thick, with a composition of 1% carbon and 5.25% chromium. It is not in coils and is not further worked beyond cold rolling, making it suitable for dies and punches. This product falls under tariff item 7226.92.00 as a flat-rolled product of other alloy steel, width less than 600 mm, not further worked than cold-rolled.
7226.92.00A2 Tool Steel Cold-Reduced Strip 350mm Wide
> A2 air-hardening tool steel sheet, cold-rolled, 0.8 mm thick and 350 mm wide, in annealed condition without additional surface treatments. This is a flat-rolled product of other alloy steel, width less than 600 mm, not further worked than cold-rolled.
7226.92.00A2 Tool Steel Cold-Rolled Plate 500mm Wide
> A2 air-hardening tool steel in cold-rolled plate form, 500 mm wide and 3 mm thick. This is a flat-rolled product of other alloy steel, width less than 600 mm, not further worked than cold-rolled. It is used for form tools and shear blades.
7226.92.00A2 Tool Steel Cold-Rolled Sheet
A2 tool steel cold-rolled sheet, 250 mm wide and 1.5 mm thick, is a flat-rolled product of other alloy steel with a width under 600 mm. It is not further worked than cold-rolled, so it falls under tariff item 7226.92.00.
7226.92.00A6 Tool Steel Cold-Rolled Sheet
A6 tool steel cold-rolled sheet, 1.6 mm thick and 280 mm wide, is a flat-rolled product of other alloy steel with a width under 600 mm. It is not further worked than cold-rolled, qualifying for tariff item 7226.92.00.
7226.92.00AISI 52100 Cold-Rolled Ball-Bearing Steel Sheet
> AISI 52100 cold-rolled ball-bearing steel sheet, formulated for ball-bearing applications with precise carbon and chromium levels. This is a flat-rolled product of other alloy steel, width less than 600 mm, not further worked than cold-rolled.
7226.92.00AISI 52100 Cold-Rolled Ball Bearing Steel Strip
AISI 52100 alloy steel cold-rolled strip, with precise thickness under 3 mm and width less than 300 mm, specifically formulated for ball bearing production with controlled carbon (0.95-1.13%) and chromium (1.25-1.45%). It is not further worked beyond cold rolling. This product falls under tariff item 7226.92.00 as a flat-rolled product of other alloy steel, width less than 600 mm, not further worked than cold-rolled.
7226.92.00Cold-Reduced 100Cr6 Ball Bearing Steel Strip
> EN 100Cr6 (equivalent to AISI 52100) cold-reduced flat-rolled steel strip for manufacturing precision ball bearings, with controlled low sulfur and phosphorus. This is a flat-rolled product of other alloy steel, width less than 600 mm, not further worked than cold-rolled.
7226.92.00Cold-Reduced 100Cr6 Bearing Quality Steel Sheet
100Cr6 (EN 31) ball-bearing steel precision cold-reduced sheet, 250 mm wide and 1.5 mm thick, with exact composition for bearing rings and balls including low sulfur and phosphorus. It is not further worked beyond cold reduction. This product is classified under tariff item 7226.92.00 as a flat-rolled product of other alloy steel, width less than 600 mm, not further worked than cold-rolled.
7226.92.00Cold-Reduced 4140 Chromium-Moly Steel Sheet 500mm Wide
Cold-reduced 4140 chromium-molybdenum steel sheet, 1.2 mm thick and 500 mm wide, is a flat-rolled product of other alloy steel with a width under 600 mm. It is not further worked than cold-rolled, so it falls under tariff item 7226.92.00.
7226.92.00Cold-Reduced 52100 Bearing Tool Steel 310mm Wide
> 52100 chrome alloy tool steel cold-reduced strip, 310 mm wide and 1 mm thick, used as a precursor for bearing races. This is a flat-rolled product of other alloy steel, width less than 600 mm, not further worked than cold-rolled.
7226.92.00Cold-Reduced 6150 Alloy Steel Strip 350mm Wide
Cold-reduced 6150 chrome-vanadium alloy steel strip, 350 mm wide and 2 mm thick, is a flat-rolled product of other alloy steel with a width under 600 mm. It is not further worked than cold-rolled, qualifying for tariff item 7226.92.00.
7226.92.00Cold-Reduced O1 Tool Steel Strip 350mm Wide
> O1 oil-hardening tool steel flat product, cold-reduced, 350 mm wide and 2 mm thick, used for manufacturing cutting tools and gauges. This is a flat-rolled product of other alloy steel, width less than 600 mm, not further worked than cold-rolled.
7226.92.00Cold-Rolled CPM-M4 Tool Steel 450mm Wide
> CPM-M4 particle metallurgy tool steel cold-rolled sheet, 450 mm wide and 2.5 mm thick, used for high-wear applications like blanking dies. This is a flat-rolled product of other alloy steel, width less than 600 mm, not further worked than cold-rolled.
7226.92.00Cold-Rolled D2 Tool Steel Sheet 400mm Wide
> D2 tool steel sheet, cold-rolled, measuring 400 mm in width and 1.5 mm thick, used for making precision dies and punches. This is a flat-rolled product of other alloy steel, width less than 600 mm, not further worked than cold-rolled.
7226.92.00CPM-M4 Cold-Reduced Tool Steel Sheet
CPM-M4 powder metallurgy tool steel cold-reduced sheet, 280 mm wide and 1.2 mm thick, for dies. It is not further worked beyond cold reduction, with no polishing or other treatments. This product is classified under tariff item 7226.92.00 as a flat-rolled product of other alloy steel, width less than 600 mm, not further worked than cold-rolled.
7226.92.00CPM-M4 Tool Steel Cold-Reduced Strip
CPM-M4 tool steel cold-reduced strip, 0.8 mm thick and 295 mm wide, is a flat-rolled product of other alloy steel with a width under 600 mm. It is not further worked than cold-rolled, so it is classified under tariff item 7226.92.00.
7226.92.00CPM-M4 Tool Steel Cold-Rolled Strip 320mm Wide
> Powder metallurgy CPM-M4 tool steel cold-rolled to 0.6 mm thickness and 320 mm width, uncoated. This is a flat-rolled product of other alloy steel, width less than 600 mm, not further worked than cold-rolled.